AutoCAD Civil 3D :: Points Creation / Change Default Local Coordinates Permanently?
Sep 27, 2012
I often create points manually. You get that dialogue box where you choose the layer and the default local coordinates, etc etc.
The local coordinates setting always defaults to Northing/Easting. (ditto the grid coordinates).
I set it to Easting/Northing as is standard around these parts and do my points, but if I close the box, when I reopen it to add more points later, it is back to Northing/Easting.
I cannot find a variable to control this behaviour.
I never need points to have north first and would like it to default to Easting/Northing at all times. Yes I'm using the Metric template.
Is there a way to change this default?
View 8 Replies
ADVERTISEMENT
May 14, 2013
I have a lot surfaces. Now i need change coordinates.
[URL]
View 4 Replies
View Related
Oct 17, 2012
What I have is northing/easting survey data starting at an arbitrary point. The rest of the points are measured from that.
I do know the global coordinate of the base point, but no other points.
My question is how can I take all of the points and create gloabl coordinates out of them. I assume this is possible because I know the global coordiane of our reference point, I just have no clue how to do it in CAD.
View 6 Replies
View Related
Nov 3, 2011
I am trying to change my default import location on my MAC Pro Tower, to one of the internal HD's. I have named the HD Photo Location, and have created a folder in it called it "My Lightroom Photos". I have been able to create this, but cannot seem to ber able to make it my default when I open LR 3.5. I have to manually go in and change it. Is there a way that this can be changed to make it my default?
View 4 Replies
View Related
Aug 26, 2012
where the preferences are saved for items like in the postscript tab. Automatically increase Flatness
Auto increase Fountain fill steps. Optimize Fountain Fills
Confirm to DSC
As far as I can see the default behavior for these should be ON, it used to be this could be saved as the Defaults until after version 9, now they turn off. However is there any reason to ever have them off? I think not but just in case there is I will allow as to leave them there for people to turn off.
Yes I am aware I can save those settings as Print styles and have in fact got 2, one with crop marks enabled and because crop marks are 100 % CMYK unless greyscale is chosen I have one with no cropmarks so Xerox doesn't charge me color clicks on mixed black and color prints. Of course one has only to forget to use one of these 2 preferences to have all the problems associated with not having those items checked such as dropped out complex items.
While I am at it another default should be NOT to treat all objects as filled - the first thing needed to be changed during a install. I can however live with it as is as it is not a item that needs to be changed with every job.
As I see it the most common reason for Adobe users to complain about Coreldraw is the problems that come by not having Auto Increase Flatness as a default postscript behavior and their not knowing to turn it on.
And while I am at it an addition for creating PDF's would be the option of creating as a Bitmap, this being the preferred proofing method so providing a proof doesn't provide the artwork to the client, it could also be a useful method of supplying Web artwork.
View 2 Replies
View Related
Feb 27, 2014
My work involves importing in new documents and formating them correctly. We have a specific font style that is different than the original font. Illustrator cannot read those fonts, so it defaults to Myriad Pro in the original text size. Since it is changing it from Myriad Pro to Arial, I don't really have a problem with the global change that this would have.
I already have the [Character Styles] options set up for a template, but this does not work on new documents.
We are on Windows 7 with CS6.
View 3 Replies
View Related
Jul 24, 2011
Can I change the default bitrate from 8000 kbps to 6000 kbps permanently? I brought a number of individual .mp4 song files into the timeline, about 1 hour twenty minutes total in length, can I normalize them without using "create video file". I want to play this video and be able to skip songs if I want to. The original file .mp4. I am using a trial of Corel VideoStudio Pro x4.
View 1 Replies
View Related
Jan 29, 2013
I have been using the "LIST" command to get coordinates of a point. The list can be as long as my monitor is high. I need to copy the coordinates of about 3 000 points to a Microsoft Word file to manipulate with them.
The "LIST" command would show me about 4 points after which i have to press "ENTER" to get the next ones, but this is obviously pointless. How could i get the coordinates of very many points to a text file all at once?
View 6 Replies
View Related
Jul 23, 2013
I have the following 8 points of XYZ-coordinates:
Location SampleID X Y Z Depth Elevation FGACDC-SS01 FGACDC-SS01-S1 -77.055876 39.00845 314.5 0.5 315 FGACDC-SS01 FGACDC-SS01-S2 -77.055876 39.00845 297 18 315 FGACDC-SS02 FGACDC-SS02-S1 -77.055886 39.008643 319.5 0.5 320 FGACDC-SS02 FGACDC-SS02-S2 -77.055886 39.008643 302 18 320 FGACDC-SS03 FGACDC-SS03-S1 -77.056203 39.008736 311.5 0.5 312 FGACDC-SS03 FGACDC-SS03-S2 -77.056203 39.008736 294 18 312 FGACDC-SS04 FGACDC-SS04-S1 -77.056203 39.008491 304.5 0.5 305 FGACDC-SS04 FGACDC-SS04-S2 -77.056203 39.008491 287 18 305
These 8 points are for 4 sampling locations with 2 depths for each sampling location. I used AutoCAD 2012 a little bit before and I am new in using AutoCAD Civil 3D 2013. What are the key steps and tips of using the values of XYZ-coordinates listed the above-mentioned table to input manually into the AutoCAD Civil 3D 2013 program. Note: 4 sampling locations are in the 4 corners of a square lot and the 8 points should look like 8 corners of a box.
View 9 Replies
View Related
Sep 6, 2013
Any way of viewing the coordinates of the Control Vertices (Control Points) of 3d or 2d NURBS Surfaces. I tried to use the "properties" of the 3d NURBS surface that i designed but i could not find them anywhere..
i would also like to ask if it is even possible to export these coordinates to txt or even more to Excel.
View 1 Replies
View Related
Sep 5, 2013
Using Civil 3D 2013Coordinates coming out of survey equipment are modified state plane GROUND (scaled up from the origin by the combined factor).Drawing is setup with state plane coordinate system with user defined transformation to establish geodetic reference and the ability to label lat/long or import Bing map data.Survey database is setup with "No Datum, No Projection" (data is already at ground, I don't want ot transformed).Import style is PNEZD and is set to use Northing/Easting not Grid Northing/Grid Easting.After importing points into survey database, coordinates of survey points match the CSV. This is good.After importing points from database to drawing, they are taken as grid coordinates, are scaled again and are off ~5,300 feet northeast.Why would Civil 3D assume the points in the database are grid and scale them when the import style used did not specify grid? Is there a setting or something I can do to tell Civil 3D to leave my coordinates alone?
View 9 Replies
View Related
Feb 22, 2011
I draw a line then use divide command to put some points with equal distance in this line. some points will then are created on this line but when i move the line, the points do not move. I am wondering if these points can permanently stick to the line so that if i change the position of the line, the position of the points will also change.
View 9 Replies
View Related
Jan 19, 2012
I still have users using the old workflow (pre-2010) of creating local files by copying and pasting the central file from the server to their C drive and renaming the local copy. Is this workflow still supported in Revit 2012?
I have been suggesting to users to use the worksharing options in the open project browser, but sometimes for some people habits are hard to break, do I need to be concerned?
View 9 Replies
View Related
Jun 19, 2013
My father in law is a civil engineer but works everything out on paper. I'm convinced there is a better way (using autocad). I'm competent with computers but never used autocad in my life and I'm not a civil engineer.Before starting setting out on site, he is given the proposed layout, based on 'National Grid Co-ordinates' (in the UK).
Currently he's working on a carpark which is a nice grid but on a different axis to the national grid coords. To make things easier, he picks a coordinate and labels it Easting 100.000 & Northing 100.000. From there he converts the coordinates given to values relative to this 100,100 coordinate. He does this on paper.
Could this be done using AutoCad (2011)?
View 4 Replies
View Related
Oct 22, 2013
My drawing settings is set for US Feet. My Data Collector is set for US Feet. I only import a txt file into the drawing. My txt file coordinates match my Data Collector but never in the drawing. We're only talking about hundredth but I don't understand why it changes in the first place.
Example
Point 1 in txt file & DC --- 10000N 5000E
but in drawing --- 9999.98N 4999.99E
Point 2 in txt file & DC ---- 9624.7230N, 4971.5346E
in drawing ----- 9624.7422N, 4971.5445E
View 9 Replies
View Related
Jun 3, 2013
I have set the default style for the drawing to a certain style by going to toolspace - settings and right clicking on point and clicking on edit feature settings ...under default styles i set it to the one I want for both point style and point label style......how come when I create a few manual points and then go to the prospector tab and right click on _all points, the point label style is not set to the default one I set it to as I described above? The points are not coming in the way I want them to?
View 3 Replies
View Related
Sep 5, 2011
I am modelling (low poly) a human head whose z-axis is not vertical. Now the problem is when I orbit it (using alt + middle mouse button), the head doesn't stay upright, and this is really not handy !!
The problem would be solved if I could, either orbit around local coordinates (meaning left-right mouse movements would spin around local z-axis, not world z-axis), or maybe change orbit style (for example blender has another orbiting style where left-right mouse movements spins according to view)
There would be another solution, which would be applying a rotation modifier to the whole scene, and removing when I'm done with the head, but I don't know if this is possible...?
View 2 Replies
View Related
Sep 23, 2013
Can I apply a default style to points with a raw description not in the description key sets?
When I import survey points into the drawing my description keys will assign specifed styles (and therefore layers) to descriptions it recognises, and a default style (and layer) to ones it does not recognise.
Then if i change raw descriptions in the drawing I can "Apply description keys" and have the styles and layers change based on the changes I made to the raw description. This is fine for descriptions in the key set.
Can I get Civil3D to apply the default style to points that did have a description that is in the DKS but has now been changed to one that is not? As it works for me now, these points remain unchanged in there layer and style.
Civil3D 2014 - Windows7 64bit
View 6 Replies
View Related
Jun 18, 2012
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
View 1 Replies
View Related
Jul 4, 2012
Is there any method in Civil 3D change the points number?
View 9 Replies
View Related
Jan 11, 2013
I setup a dwg with all of my annotations sized just right for model and paper, but when I XREF them to my dwg that has all of my sheets to plot. The points look the same on my model tab, but when I go to layout the points are huge. I then made sure I had the same styles and drawing settings in both dwgs.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 2 Replies
View Related
Feb 29, 2012
By rotating points elevations change too!? I wonder what I am doing wrong!?
Just starting using Civil 3D 2012 version.
View 4 Replies
View Related
May 16, 2013
I am trying to find out if there is a way to change the code for the Corridor Section Points Report. See attachment.
In page 1 of the attachment you will see the names that we prefer for the different zones in our assembly as per our Standards.
On page 2 is the default names that C3D spits out as defaults (under String Cut).
We are running C3D 2012.
View 3 Replies
View Related
Sep 25, 2013
there are some points in my dwg that I can't move. I can rotate but not move. I noticed in the point file the ones that I can't move have a grey square in the cell with the point number and the ones I can move have an empty circle. How do I change the square to a circle?
View 7 Replies
View Related
Apr 30, 2011
Is there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
View 2 Replies
View Related
Jul 27, 2012
I am new to Civil 3D upgrading from LDD2009. I am trying to edit some point descriptions brought in through a fieldbook import through my survey database. Under my survey database in Survey Points I hit EDIT POINTS and it brings up the SURVEY POINTS EDITOR. My points are listed as white observed points but when I click on the description cell it won't allow me to change anything.
View 7 Replies
View Related
Nov 7, 2013
I would like to have my corridor section points report to have different labels for the points like Edge of Shoulder or EOP instead of labels like P2 and Hinge. Is the only way to do this to somehow change the codes in the stock subassemblies?
Civil 3D 2014
View 4 Replies
View Related
Mar 15, 2012
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
View 6 Replies
View Related
Mar 14, 2013
I can only change the layer color.
But I can't change the cross simbol, its drwaing scale.
Also cant view the point number,....
Maybe I cant view or set these properties when points were added using "Point Files" option.??
Civil 3D (2013)
View 9 Replies
View Related
Nov 3, 2012
I want to know why I can't change coordinate of points while importing points from Points menu?
I created new file, assigned any coordinate system to the model. Opened Import points windows there, created new file format which there I assigned Coordinate zone transform to the coordinate system of the text file and imported my text file. But the coordinates of points didn't changed or transformed. When I do it by Survey in Toolspace its works good. I want to know whether I did any wrong or it is problem of software.
I use AutoCADCivil 2013 64 bit in Windows 7 64 bit!
View 2 Replies
View Related
May 1, 2011
I know how to go in to my settings and change the default page settings on a new design, but I want my settings to ALWAYS come up with the settings I change them to. How do I set these so that every time I start Xara I don't have to go change the settings AGAIN?
View 9 Replies
View Related
