I draw a line then use divide command to put some points with equal distance in this line. some points will then are created on this line but when i move the line, the points do not move. I am wondering if these points can permanently stick to the line so that if i change the position of the line, the position of the points will also change.
View 9 Replies[URL] When I use a point on an existing geometry as reference to place a new line or shape, I get a strange result when attemting to move either geometry.
As you can see in the video the two shapes will BOTH move when only ONE is selected.
Also, it seems that the shape/ lines that are not selected but still move are anchored somewhow which causes distortion.
[center]
[img]http://vidbull.com/images/logo.jpg[/img]
[b]acad.wmv[/b]
[url="http://vidbull.com/4aj8tu1ban4h.html"]http://vidbull.com/4aj8tu1ban4h.html[/url]
[/center]
I often create points manually. You get that dialogue box where you choose the layer and the default local coordinates, etc etc.
The local coordinates setting always defaults to Northing/Easting. (ditto the grid coordinates).
I set it to Easting/Northing as is standard around these parts and do my points, but if I close the box, when I reopen it to add more points later, it is back to Northing/Easting.
I cannot find a variable to control this behaviour.
I never need points to have north first and would like it to default to Easting/Northing at all times. Yes I'm using the Metric template.
Is there a way to change this default?
I would like to get more advanced and creative with my creations. basically when i think AutoCAD i think lines so a nice short program to get started with is to create a line between two point (or simular). The tutorials online are wofel in learning the basics such as this is, need few starters on how to achieve this
View 4 Replies View RelatedIs there as easy way to count the points on a divided line? Example....making contour lines and need to interpolate the points between elevations.
View 3 Replies View RelatedIs there a way of reversing the start and end points of a line? I have a lot of mirrored lines on my model, and so the direction (start/end) is also mirrored. This poses a problem when i export the model to another program witch has a coordinate system based on the direction of the entity (in this case a line). So i come back to the question, is it possible to change(reverse) the start/end position to already drawn (mirrored) lines? Btw i am using acad2011
View 2 Replies View RelatedI have a problem about creating feature line. When I want to create feature line between two red points, another point come into being by itself (blue point). If you look at the file I have attached, you will understand well what I want to express. I cant make any changes on this point. I cant delete, modify etc.
View 4 Replies View Related1. When I do a re-import of my points my linework appears to double up (linework over linework).
2. In my description keys I use "rr" for rail road and "rrisg" for railroad signal (no * in code), linework comes in for both even though I only have it set up for "rr". I thought without the * in code this would not happen, but still does.
3. Finally, I use the "Survey Point Properties" window to make edits to points. All seems great, but when I got back into my drawing all my work was gone? Do I need to update the database some how with the changes? I was under the assumption that by doing it the way I do the changes are saved to the database. Is it better to do the edit on the Survey Tab by right clicking on the import event and selecting "Edit Points"?
I would like to make a block with 2 points and I would like them to follow a line with those 2 points..
Same as you can use the measure command to put blocks on a line with a pitch distance I would like to do the same but the block schould snap with 2 points on the line.
I am drawing a few feature lines within my surface and it is creating split points.....not even sure how they are created and how do I get rid of them....is there a way? I read a little about them and what I have read so far indicates that it is a point where two feature lines cross? I don't have another feature line created anywhere near this one.
View 5 Replies View RelatedWhen I try to use the move tool and hover over an object, the marker tool bounces around and has trouble finding the selection point. When I zoom in close to get the exact point on a line - it doesn't select anything, so I can't actually move an object.
I've tried adjusting the object snap settings however this doesn't seem to be working.
I'd like to explode a polyline 2d, 3d or a simple line to single 3d points.Civil 3D (2013) how much you have to improve....
View 4 Replies View RelatedI am trying to create a tool that looks similar to Line in Autocad. I got the solution for dynamic multiple insertion points but the issue is the line is only visible after the end point is selected. But i want the line to be visible before selecting the end point, this should be as same as the line we use in autocad. Following is the code i used to create a line with multiple insertion points.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurEd As Editor = acDoc.Editor
Using lock As DocumentLock =
[Code]....
I know that I can find which points are which by checking the properties, but I am wondering if there is a way to (for example) edit the grips so that they indicate which end is which, like how they are used in dynamic blocks to show how an object can stretch. This isn't a problem that requires an imeediate fix, but would be nice if there were such an option.
View 4 Replies View RelatedJust downloaded autoCAD2012 and am going through some of the new features.
I drew an arc polyline and then drew a rectangle, I then moved the rectangle to sit on the line. Once I move it here it seems to stick to the arc line, so if i move the rectangle, where the line is hitting the shape drags along with it.
I would prefer it not to stick for the time being.
I need to place a circle, of a user-defined radius, as a marker at the endpoints of all lines in a drawing. how to accomplish this using lisp? It doesn't matter if they overlap; I can use OVERKILL to delete those objects.
I started the code with:
(defun c:cmark ()
(setq crad (getdist "
Specify radius: "))
)
But don't know how to cycle through the objects, determine the end points of lines only.
Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies View RelatedGiven a feature line/polyline(FL/PL) and a series of points directly on the FL/PL, how can you assign the elevations of the points to the vertices of the FL/PL?
Without using a surface?
if there is a simple way of pushing multiple Polylines to meet a final line that I draw.For instance if there is a zigzagged line, and I drew a line through the middle of it (in a similar direction).
Is there a command or script that would push all of the points on the zig-zag to meet with the straight line I drew?
I want to create new vertex points in feature line and 3dpol.
I have this:
try
{
if (obj.GetType() == typeof(Autodesk.AutoCAD.DatabaseServices.Polyline3d)) {
Polyline3d p3d = (Polyline3d)trans.GetObject(entRes.ObjectId, OpenMode.ForWrite);
[Code]....
In this code line:
oFtrLn.InsertFeaturePoint(punt, AeccLandFeatureLinePointType.aeccLandFeatureLinePointPI);
always catches the same Exception "the value is not within the expected range" .I have translated it because I get "El valor no está dentro del intervalo esperado". Perhaps is this: " Value does not fall within the expected range.".
I have tried it with different point3d values but always catches Exception.
With pol3d I have similar problem.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I am trying to get the end points of an invisible line it would be the line that you offset I know all about polar I just don't know which angle to add or subtract and I will pick the point on the side I want it to be on I am going to pick 2 lines and I want them to offset invisible lines in the middle the lines are not parallel.
View 8 Replies View RelatedI have coordinates for an aerofoil which I put into Autocad and plotted using pline. I have 52 points, what I want is to have more points on the aerofoil, i.e interpolate. I can probably create more points by averaging two adjacent y-points and two adjacent x-points but it would be much better if Autocad did this
the LIST command only gives the points i put in the program.
Capture.JPG
I have 2 points and a line given (both points on one side of line)
I want to draw a circle so that it passes through two points and tangent to the given line.
how can i draw this red line in autocad, its an arc from point 1 to point 3 in spherical 4 side segment? point 1 to point 2 to point 3 to point 4 closing the segment at point 1 and point 4 (fused)
View 9 Replies View RelatedSeems that the Save format keeps getting changed back to 2010 in AutoCAD 2013. We set the Save Preferences to save as 2013 in the Options > Open & Save > File Save: Save As box to 2013.
It seems that if you open an older version of AutoCAD, say v2010, then the next time you want to save a drawing (not necessarily the drawing you just opened, but another one you are working on) even if it was already in v2013, it gets saved back to v2010. And when you go back into the options dialog, it now is set to save everything as v2010. This wouldn't be so annoying if it didn't take 30 seconds to save the drawing as a v2010 drawing. There is a substantial difference in the time it takes to save a drawing to v2010 when using AutoCAD 2013.
Is there a way to make it stick to saving as a v2013 format?
Whenever I try to extend or even move lines or shapes, it also moves the line it's connected to.
So I have a line attached to a rectangle. I select the singular line only, and I try and lengthen it, and when I do the rectangle also moves with the line of the amount I extended it. How do I turn this off? I was able to cope with it for a bit when it first started but now it's just downright annoying.
We have a need to select a tangent line/polyline etc and then select two other points we would then like to have the program draw an arc through the two points and yet still be tangent to the initial line/polyline that we picked. We don't care what the radius is as we believe there is only one solution anyway. It would be wonderful if we could just use the Arc command and select start>Second Point> then just use the Tangent Osnap but I guess that is out of the question :-)
The only code that I have come across that even resembles this only allows for one point not two (STILL VERY HANDY AND VERY SLICK)
(vl-load-com)
(defun near_vertex_arr (obj / dxf_obj e_next obj_vlax pt_sel par pt_first pt_snd i bulge)
;bruno.valsecchi
[Code]....
How does everyone else hande this? By they way... I dont care what language it is written in :-)
I have a list with many points is it possible that i can draw a line or polyline on those points using MapCar function.
View 6 Replies View RelatedI have a surface made by a wide array of points and a line of points that i need to use that surface to assign elevations to ..
View 3 Replies View RelatedI want to draw a line between the two sketches visible on the image below. The line should be in the plane visible. The starting point of the line should be from wherever the top sketch intersects the plane of the current sketch. The finnish point of the line should be wherever a line of the bottom sketch intersects the current sketch plane.
There is no tooltip appearing that would allow me to quickly "attach" the starting line to the correct position. Is there such an aid, and how do i turn it on?
In order to create a swale, I created a feature line representing the bottom of the swale and graded up to an existing surface around its outer perimeter. The slope pattern looks ok when it initially generates the grading. I need to grip and drag certain points along the feature line in order to bring the top of slope lines of the swale close to the bottom of slope lines of an adjacent berm. As soon as I grip and drag the feature line, the slope pattern lines go awry. Instead of a short line then a long line, then short line, etc., the lines are all the same length. It actually appears as if short and long lines are overlapping each other.
View 8 Replies View Related