Whenever I try to extend or even move lines or shapes, it also moves the line it's connected to.
So I have a line attached to a rectangle. I select the singular line only, and I try and lengthen it, and when I do the rectangle also moves with the line of the amount I extended it. How do I turn this off? I was able to cope with it for a bit when it first started but now it's just downright annoying.
[URL] When I use a point on an existing geometry as reference to place a new line or shape, I get a strange result when attemting to move either geometry.
As you can see in the video the two shapes will BOTH move when only ONE is selected.
Also, it seems that the shape/ lines that are not selected but still move are anchored somewhow which causes distortion.
[center]
[img]http://vidbull.com/images/logo.jpg[/img]
[b]acad.wmv[/b]
[url="http://vidbull.com/4aj8tu1ban4h.html"]http://vidbull.com/4aj8tu1ban4h.html[/url]
[/center]
I am wondering if there is a function that takes two lines that are not parrallel and will extend them until they intersect?
View 9 Replies View RelatedI am currently trying (trying being the operative word!!!!), to create a block of a cill, which I can rotate to separate angles.
Problem I have is getting the internal lines to join each other. I have tried so many different ways to get them to meet, but seriously struggling. I can't seem to find anything referring to extending lines or trimming lines in a Dynamic Block.
My question is how do i extend lines to a specific point? I have attached a before and after image below for an example. But obviously it takes to long to do this line by line and getting the spacing correct. Is there a way to do this?
Capture2.JPG-----------------------------> Capture.JPG
I'm having trouble with the "extend" function on AutoCAD 2012 (windows). Randomly, the "extend" function will delete the lines I select. I sometimes will have to undo and re-input "extend" three to four times for it work properly.
View 2 Replies View RelatedI know that I can use a clipping mask, but I prefer not to have the extra shape of a clipping mask. I've tried all of the Pathfinder commands and those don't work. The Shape Builder tool is tedious for this. An example is the circle with lines extending past the circle in the illustration below. Is there an easy way to delete just the portions of the lines that extend past the circle and leave those inside the circle?
View 13 Replies View RelatedIs it possible to move lines from different heights on the Z to "0"?
I am trying to use Architects drawings that have multiple line that look to intersect on looking from the top. but when you view them the front or side they are on different heights.
When I draw lines that don't start/end touching a line drawing by the Arch they are on the "0" height on the Z.
Not sure what they used to draw these original. Using Arch lines as reference to draw detail is not working very well, its taking way to Lang to do anything.
See Attached
Use the view to choose between front, top and Isometric.
A red box appears when i go to move a line. When the red box comes up on the line, the command box says 'Specify strech point or undo to cance'l. How do i put everything back to normak because i cant move any lines or resize them how i used to??!!
View 1 Replies View RelatedIm trying to move radial dimension text away from the dimension line so I can add in text between the dimension and dimension line.
#1 is the default style
#2 is what happens when I do "Move text only", it moves the dimension line to inside the radial and I do not want that.
#3 is how it looks when I just manually edit the dimension text
#4 is how I want it to look
#4 is a combination of dimension and a manually added leader with the dimension line removed. How can I move the dimension text on a radial without the dimension line automatically moving to the inside? Or is there another way to add in text outside the box while having the dimension text offset from the line?
Just downloaded autoCAD2012 and am going through some of the new features.
I drew an arc polyline and then drew a rectangle, I then moved the rectangle to sit on the line. Once I move it here it seems to stick to the arc line, so if i move the rectangle, where the line is hitting the shape drags along with it.
I would prefer it not to stick for the time being.
Move multiple feature lines between sites?
Is there a way to move all the feature lines in a surface from one site to another site all at once? I know how to do them one at a time, but when I select them all, right-click "move to site...", it does nothing.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
When I use the move command to, let's say, to move a floor plan (drag to new location on the page), some of the lines in the "moved" floor plan are either skewed or missing. I'm able to "cut and paste" as welll as "copy with basepoint" w/out problem.
See attachment below.
How might I correct this problem?
Seems that the Save format keeps getting changed back to 2010 in AutoCAD 2013. We set the Save Preferences to save as 2013 in the Options > Open & Save > File Save: Save As box to 2013.
It seems that if you open an older version of AutoCAD, say v2010, then the next time you want to save a drawing (not necessarily the drawing you just opened, but another one you are working on) even if it was already in v2013, it gets saved back to v2010. And when you go back into the options dialog, it now is set to save everything as v2010. This wouldn't be so annoying if it didn't take 30 seconds to save the drawing as a v2010 drawing. There is a substantial difference in the time it takes to save a drawing to v2010 when using AutoCAD 2013.
Is there a way to make it stick to saving as a v2013 format?
I draw a line then use divide command to put some points with equal distance in this line. some points will then are created on this line but when i move the line, the points do not move. I am wondering if these points can permanently stick to the line so that if i change the position of the line, the position of the points will also change.
View 9 Replies View RelatedI have just been doing some work for a company and they were using AutoCAD 2009.
One of my tasks involved stretching and moving items from imported drawings over Architectural layouts. Lines drawn on the x and y axis were fine. However, if I zoomed in on angled lines they moved out of view making them difficult to select or position to a snap point. If I selected those lines then they remained in place when I zoomed in.
When I approached the company manager he replied by saying that he would zoom in then zoom out to the point where the lines were correct and in place. I thought that he was either joking or was testing me! It meant I could not do any detailed work - which contradicts the use of Auto CAD.
The question has to consider the fact that the lines were angled and that they remained static when selected. When zooming in and selecting them they were off and running out of the screen view. also note that my colleague at the next desk opened up the file on V2008 and he could zoom in okay. I was also using a wide screen if this matters.
We loaded up C3D 2013 a month or so ago. I exported my user profile (Options>Profiles>Export) from C3D 2012 and loaded it into 2013. Now the profile will not stay loaded. I have to reload it every time I startup C3D. It also doesn't hold my view cube settings or my panes.
View 4 Replies View RelatedHaving problems with parts of their model not showing up after going through the AEC exchange to the adsk file then open it up in Revit architecture? Or some wild geometry from a part sticking out 20 or 30 feet out into space? It seems that if you create a part one way it doesn't do well in the conversion process while creating the same part another way or a different sequence it's ok with it. (using Inventor 2011 and viewing in Revit 2012)
View 2 Replies View RelatedAutoCad sticking on commands like copy selection and move tool, It is running very slow and when saving it says there is no system memory, although my Computer has pleanty of memory (the local disk has over 200GB space)
PC has correct specification for AutoCad 13, and I have never had problems until this morning-
I am having issues with the Material editor in 3ds max design 2011. I am creating a solar system as a school project. My planets follow a circle spline. I put textures on the planets in material editor to resemble the planet texture. My problem is, the texture is not sticking to the planet. The sphere itself follows the circle spline and makes 1 complete rotation around the circle spline in 87 frames and the sphere spins 2 complete times showing all sides of the sphere as it follows the spline. However, when i render it, I see the same side of the texture on the sphere on every frame.
Apon opening the zip File, look for the planet called Mercury. While toying with the timeline, you will notice that the planet follows the spline around the sun, as well as spins on its Z axis. But in the render, the planet does not move on its Z axis. It follows the spline, but does not spin like it does while in the design stage.solarsystem2.zip
It's not remembering my Customize User Interface->Colors->Grids: Set by Intensity value.
*edit*
I had to manually add the following line to MaxStartUI.clrx just above the very last line:
<GridInfo gridIntensity="56" whiteOrigin="0" useGridColor="0" />
First it was adding that line but with different (random?) values for gridIntensity, then it wasn't adding that line at all, even when I explicitly saved the settings after I altered them.
Something is wrong, I don't know how a professional company can let things like this happen.
My icons go bad sometimes too, some of them get greyed out and look disabled even though they aren't. It's lame.
I want to put a particular hex code in an object. When I paste the hex code in the color picker of my object it changes to the color I want. After I choose another object and then go back to the particular object with my hex code its a different hex code but the colors look similar.
View 2 Replies View RelatedI have a layered file, the color space assigned to it is sRGB. I save a png file via Save For Web, tick the option to convert export to sRGB. All looks good in the save for web 2-up preview. But when I open the new png file, it's color profile is set to Adobe RGB, and the color space looks off—not like it did in the SFW preview.
Details: My default color space is Adobe RGB. Sync'd across all CS5 apps. I have the option ticked to warn me on profile mismatches when opening a file. So far so good.
So it seems like my Working Space color (Adobe RGB) is overriding SFW settings as well as my document color space settings
I have set 2 parameters in the Family Editor so they 'Group Under' Dimensions, yet when I load into a project (that the family object has been deleted out of via the Project Browser), I find instead they are Grouped under 'Other'.
One of the offending objects attached.
I've done this 2 ways, once by opening within Revit the Family Editor, making the change and then loading back into the file, only to find nothing has changed, and also then by again opening up in the family editor from Revit to find ditto; and separately by opening up the file directly in Explorer and then loading into the open project.
Not an enormous problem, just annoying as I want to group Dimensions parameters naturally enough under Dimensions!
I want to move my horizontal hatch lines so they align with the top of my windows.
View 1 Replies View RelatedI have been having issues with using the blend tool on my object. If you look at the picture, I had one outer shape that was what I wanted shaded and a thinner shape that runs inside the other. It blends perfectly fine everywhere except at the bottom. I don't know how to explain it or what went wrong but I can't figure out how to make the blend fit inside the shape.
View 7 Replies View RelatedSpot healing brush "sticking"?
Basically, a substantial portion of the time I hit "Q" I do not get the circle for spot heal. The cursor disappears and I cannot see anything. However, the tool is working, but I can't see its size. If I turn it off and back on I get the crosshairs and thus I can click and hide spots, but I can't see when I grow/shrink it, and I can't see when I move it.
I've seen this with all of the Lightroom 4.1 versions (RC1, RC2, and now GM) on OS X 10.7.4. This is on a Mac Pro with ATI graphics.
I am trying to "skew" an object. I use the Free Transform tool, then click and hold on a handle, then hold down Control, and drag the handle where I want it. This works fine. BUT the second I let go of either the mouse or the Control button, it pops back to its original location/shape. How do I make the transformation "stick"? I'm sure I'm being really dense and missing something very simple.
View 9 Replies View RelatedWhat would cause lines to move left/right some seemingly random distance in an elevation view? Rarely, I run into an issue where detail lines and filled regions added to an elevation view (not text, or leaders) will move some random distance, I've attached a PDF showing the issue. No other elevations, plans, or sections have anything wrong with them. The model has not moved to a different position.
View 3 Replies View RelatedI'm using PS CS5 extended on two different systems and having the same problem. My right control key is often getting stuck on - even though the key is not physically stuck. Occasionally it also just seems to stop working, as does the right alt key. It only affects Photoshop, and I can fix it by quitting and restarting. This happens on a Vista 64 system and my Windows 7 laptop. They have two different keyboards, obviously, and I think two different drivers. I use custom keyboard shortcuts for a few things, but reverting to default did not seem to work that I could tell.
my keyboard acting up until I got the laptop and started having the problem there too.
`How can I extend the red "peg" in the attached model, by 8 mm either side? (I created it as a sweep)
View 3 Replies View Related