A red box appears when i go to move a line. When the red box comes up on the line, the command box says 'Specify strech point or undo to cance'l. How do i put everything back to normak because i cant move any lines or resize them how i used to??!!
View 1 Replies
When I draw a square and then a line attached to the square and then try to move the line the line the square move with it. How can i avoid that
View 1 Replies View RelatedI've copied and pasted sections from old drawings into new ones, and it seems to have completely messed up some fundamental aspects of my AutoCad.
After I pasted I received some error message which I didn't understand. I think it said something about a "Language" problem, (Needless to say I clicked the nice big "OK" button without any thought). Now, every time I open CAD there are these square symbols where there should be text
I am running CAD from my company computer, so can't use the add/remove programmes repair trick. How I can reset all/relevant settings within CAD to get things back to normal?
I'm running the 2010 model.
I am using Autodesk Inventor Professional 2013 and I am currently trying to move some square holes that I made (using extrusions). How can I move these around inside the main extrusion (called Extrusion 1 in the attached design) without changing any of the dimensions etc?
Is there a simple way of selecting them all and moving them, or do I have to do it one at a time?
I'm trying to resize pictures of ppts taken at an angle into neat squares.
View 2 Replies View RelatedI imported small (2.25 square) .
All was well untill I tried to print. Preview panel blank Photo in top corner at original size.in cell.
I have two different macs, both intel with 4 gigs of ram. I open illustrator CC with a new clean document then just draw a square. When I try move the square to another spot the blue outline moves but the the square is still in the old spot. I have to click several times for the square to show up in the new spot even then it takes a few seconds for the square to move.
Also I can't close the window I am working on. When I click the red button in the upper left corner of the canvas the window won't close.
I can't quit illustrator CC either. I have to force quit it to close it.
I have some viewports in paper space and when I resize the view port, the objects inside move in a strange way. I don't know if a variable got reset or something but this is weird. Normally I can resize a viewport and the objects stay in the same location. But now they seem to be moving relative to the edge of the viewport.
View 9 Replies View RelatedCurrently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
I cannot move any layers as it only moves the bottom square.
View 4 Replies View RelatedI have a user that can't move or resize his xref dialog box. He is using dual monitors and has no problem with any other dialog box. I've tried changing settings for docking/hide.
View 2 Replies View Relatedhow thoses light lines are made over a grandient color like the attached image. I cant seem to figure it out.
View 5 Replies View RelatedI am using Illustrator CS4. When I move my selection tool to the white square on the bounding box for resizing, I am not getting the normal arrows that appear. When I click on the box and move the pointer the entire box and image move. This was working OK until about 5 hours ago.
View 7 Replies View RelatedWhen a pdf is taken from illustrator, white lines appears on images. How can be avoided it?
I use illustrator cs5. It occures mostly on the cover pages of brochures which contains images, texts and some effects such as drop shadow etc.
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
View 10 Replies View RelatedI am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6.
View 1 Replies View RelatedAfter loading JPEG into CS6 I select move tool. I use to just grab bounding box and pull outwards to resize and now when I pull outwards it basically zooms inside frame. How do I fix this?
View 1 Replies View RelatedWhen I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
When I make a selection in a picture, the selection dotted line shows a coloured border, which is the colour of the second choice in the Materials palette. Especially if I make an addition to the selection, this coloured line runs right through the selected figure. If I copy the selection, undo the selection and then paste as a new layer, the coloured border, especially in added areas, remains visible.
how I can get rid of this strange artifact? I didn't use to have it, it emerged a few days ago.
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM
I usually use Photoshop and Fireworks, but have gotten sick of paying through the nose. I just installed Paint.net and notice that this program appears to be a great alternative to the above mentioned, but seems to be lacking a few tools. Once I get past the basics, I'll really start enjoying this program.
If I draw a square on a new layer, how do I select it to resize it or move it. I have tried to use the 'Move Selection' tool, but it keeps moving the entire layer and doesn't select the square.
I would like to place a small square in front of multiple lines of text. I want to use it like a square that would be used as a checklist.
1. Where I can find a square in the Glyphs panel?'
2. If I create a square shape, and want to place it front of each line of text layed out in a text box, what is the best way to line the square on each line with each line of text?
During text creation, I can resize the text by changing font size, use move it around..Later on if I want to modify the text (resize, move to another location)...I don't know how..
View 2 Replies View RelatedThe window with elements running in partially off the screen and the title bar is not visible. I have tried a number of things but I can not move or resize so that the complete window is visible. I am run elements 12 on a mac air
View 1 Replies View RelatedWhy can't I just highlight multiple objects and move or resize them together? This wasn't a problem in previous versions, but now when I select more than one clip (or grouped objects), the effect controls go away. I have a lower third (the title and 2 different cropped color mattes) that I want to be able to move and resize while maintaining their relationship, and I can't figure it out. I've been using Premiere for a long time, and this is a huge inconvenience. I also cannot highlight multiple clips, and adjust their length together. Sometimes it will work (rarely), but most of the time it will only adjust one at a time. It's a real nuissance when you have upwards of ten layers you need to adjust together.
View 5 Replies View RelatedHow I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
Is it possible to move lines from different heights on the Z to "0"?
I am trying to use Architects drawings that have multiple line that look to intersect on looking from the top. but when you view them the front or side they are on different heights.
When I draw lines that don't start/end touching a line drawing by the Arch they are on the "0" height on the Z.
Not sure what they used to draw these original. Using Arch lines as reference to draw detail is not working very well, its taking way to Lang to do anything.
See Attached
Use the view to choose between front, top and Isometric.
Whenever I try to extend or even move lines or shapes, it also moves the line it's connected to.
So I have a line attached to a rectangle. I select the singular line only, and I try and lengthen it, and when I do the rectangle also moves with the line of the amount I extended it. How do I turn this off? I was able to cope with it for a bit when it first started but now it's just downright annoying.
Im trying to move radial dimension text away from the dimension line so I can add in text between the dimension and dimension line.
#1 is the default style
#2 is what happens when I do "Move text only", it moves the dimension line to inside the radial and I do not want that.
#3 is how it looks when I just manually edit the dimension text
#4 is how I want it to look
#4 is a combination of dimension and a manually added leader with the dimension line removed. How can I move the dimension text on a radial without the dimension line automatically moving to the inside? Or is there another way to add in text outside the box while having the dimension text offset from the line?
I have switched my "mouse" over to the number keypad like it says to do for the touchpad computer. I go to tranform image size and the outline surrounding the photo only moves up/down or side-to-side. How do I get the outline to move at the corners so I can easily manipulate the size? Either way - FN, CTRL, Win or other buttons do nothing to enlarge photo to where I want to set it. How can I accomplish this - any experts on touchpad conversion to number keypads out there? This is Win8 with PSE11. I just want this computer to get up to par to do some photo editing.
View 4 Replies View RelatedMove multiple feature lines between sites?
Is there a way to move all the feature lines in a surface from one site to another site all at once? I know how to do them one at a time, but when I select them all, right-click "move to site...", it does nothing.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
