AutoCad :: Text In Toolbar Appears As Square Symbols?
Oct 18, 2011
I've copied and pasted sections from old drawings into new ones, and it seems to have completely messed up some fundamental aspects of my AutoCad.
After I pasted I received some error message which I didn't understand. I think it said something about a "Language" problem, (Needless to say I clicked the nice big "OK" button without any thought). Now, every time I open CAD there are these square symbols where there should be text
I am running CAD from my company computer, so can't use the add/remove programmes repair trick. How I can reset all/relevant settings within CAD to get things back to normal?
A red box appears when i go to move a line. When the red box comes up on the line, the command box says 'Specify strech point or undo to cance'l. How do i put everything back to normak because i cant move any lines or resize them how i used to??!!
Any way to turn off the ghost text that appears when you select text that is annotative, not get rid of it just not show all of the other scales for clarity.
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
When working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
I am running ACAD Mech 2012. Our LA office has ACAD LT. Every single letter, line, symbol, etc is made up of a bunch of different pieces. I found that the word SPARE was made up of 46 pieces! I have attached a portion of the drawing. I have never seen anything like this and I can't even imagine how this could be made or changed into this.
I am a student, when at school my drawing looks perfect. When I get home my text looks like it has been enlarged. I have checked all the sizes and have annotative turned off. I assume this has to be some setting that I have selected on my home computer but I can't find anything.
I'm having this strange issue with the Photoshop type tool in Photoshop CS5. It might be, although I'm not sure, a bug. The tool itself is working and lets me add text and edit. But the box that shows up when editing text (and the blinking line that shows where I am in the text) - has gone invisible. I am having this issue in only one document. - I tested the type tool on other documents, and everything was normal. I've looked up shotcuts and hotkeys to check if I've tapped a key or something, but it doesn't appear to be so.
Now about the document; it does have quite the amount of text layers, and a lot of text in them. I've tried resetting the type tool, and I've restarted the program.
When I restart the program, the tool works as it's supposed to - but after editing or adding a new text layer, the editing area is gone again! Is this a bug, or have I touched keys that do odd things?
I have Inventor professional 2011 & AutoCAD 2011.Both these programs are showing the same error. This is only affecting one PC out of 20 installed with the software
The text beneath the icons at the top of the screen appear as empty rectangular boxes. It would appear to be unable to render the character (as if it was a foriegn language set)
The PC language is set to UK English as is the keyboard.
I am using autocad 2008 and I used the function that allows you to hide objects such as hatching or lines under text. When I delete the text, I expected the invisible box to delete with it. Sadly this is not the case. I am not able to click or highlight the invisible box. How to remove said boxes?
When I click on mtext to edit info the text editor comes up but it always lands right on top of the text so I have to keep moving the toolbar around... besides turning the option "off" for the toolbar to pop up - is there a way to "dock" it somewhere?
I've been using AuroCAD long time ago back in school, and then I moved out to bentlye's microstation after I started working for Jacobs Eng. and now I have to get back to AutoCAD again. My question is how to get the revcloud and text and the revision diamond… and everything to be match with the drawing's size? coz we have stranded in microstation, that’s give you the right size for everything according to the sheet scale.
How do i go about placing text/symbols over the top of linework without braking the line. Is there a method of masking out the line with the text/symbol
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
when working in my current drawing (Model Space), i create a new mtext item, and it shows in bold, i am aware of the common problem of the text items having a z height other than 0.00 causing this, but i have checked, and reset the z height, have also tried the flatten command, and even tried explode and then flatten/z height.
I have a dwg with (dynamic) blocks and when i do a find and replace, it finds ivisbile text that aren't there. i did allready purge, there is no freezed or off layer. even when i copy the whole drawing into another empty dwg it appears.
I got a problem in my .dwg drawing. When I go to Block Editor of my drawing , I get some unexpected text like below screeshot (red marked) which disturb my afterwards activities. How can I make them off?
I was looking to change the fonts in a drawing for the Dimensions and Symbols that might have been inserted in the Dimension text entries.
This can be done manually bu editing the dimentions text after placemement, but I was ooking to set this as a default.. I cannot see where exactly this is controlled in the Styles Manager - I am only able to change the Dimension text font but the diameter symbol font is always on AIGDT.
I was therefore looking for an iLogicvb code that could do the trick, but I am not able to even change the dimension fonts... The code runs with no errors but nothing gets updated in the drawing...
Dim oDoc As DrawingDocument oDoc = ThisApplication.ActiveDocument Dim oSheet As Sheet oSheet = oDoc.ActiveSheet
I have a series of drawings and am unable to make some block text for risers not appear hidden.If I paste the block into another drawing I get the text to appear but then when I try to bring back into this drawing it becomes hidden.
When I add text and dimensions to my drawing it appears tiny on screen.What is the correct setting for text size for A4 and A3 drawings,And how do I set this?
I am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
