When working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
View 1 RepliesI know you can change the leader style and the text style in a weld symbol...I can't seem to find a style for the parts?
Specifically I'm trying to change the color, I'd like the enirety of my weld callout to be a different color...just for visually tracking and locating on the drawings.
So if I change it to orange...right now the leader and text are orange but the weld symbol itself and the tail are still black.
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I am creating a weldment that is controlled using parameters that are linked to an Excel spreadsheet (using Inventor 2012). One of my parameters is the size of the weld bead. I am able to add the parameter to change the visible size of th fillet and groove welds but am unable to have the weld symbols update to show the parameter value. How to add the parameter to the weld symbols? Or is this not possible?
View 1 Replies View RelatedI am attempting to use the Weld symbols routine from the detail palette. All the symbols are being created an enormous size. how to reduce this insert scale.
View 4 Replies View RelatedI installed ACADLT 2012. I am unable to find PFD design and symbols. I am not sure if LT comes with it or if needs to be downloaded separately as a separate package
View 3 Replies View RelatedIs there a way to update a symbol of one type, without the changes being applied to all symbols of that type in the drawing?
Example: If I have three Flag Note symbol's in my drawing from the same sketch symbol and the text reads 1, is there a way that I can change the text to read 2 in one of them without the other two flag notes updating as well?
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800
We are using Inventor 2012 professional, 2 seats. When we create a .dwg or .dwf file and dimension our parts the Diameter and Angle symbols print as the letter 'P".
The symbols show on the screen correctly, but do not print?
I want to replace view labels in drawings with sketch symbols to get a different appearance to my drawings. (As far as i know it is not possible to change the appearance of the standard view label.) See attached snap of my desired view label.
I have used i logic on several occasions successfully but im not experienced at all. The way I see this working is for a sketch symbol to be inserted below a view when it is created,the standard view label being omitted & the Scale/Name/Sheet details linking to the sketch symbol through parameters.
I have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?
View 4 Replies View RelatedI'm running 2014. Somehow, in my ignorance, I have managed to turn off the constraint symbols that show up beside the cursor as I'm sketching.
View 1 Replies View Related1) Is it possible to add a pull down menu in a prompted sketched symbol to select predetermined values instead of typing them ourselves? I would like for the symbol to behavior to be similar to a cad dynamic block.
2) I'm looking to know if we can add simple rules in prompted entries? What I wish to accomplish is to have a default value that fits our need 80% of the time and for exceptions we can write in a different value when prompted. I know we can edit text after inserting symbols but we are rushed quite often and manual editing can be forgotten.
I was working with inventor 2010, and i am want to link surface roughness symbols and text. so that they will be grouped together.
View 1 Replies View RelatedIs it possible to insert symbols into a table in Inventor 2011? I have a table set up that handles tabulated dimensions, and I need to be able to insert symbols, such as diameters, degree marks, +/-, etc.
View 4 Replies View RelatedI am having a small issue with getting the correct text from a sketched symbol in an IDW. I can populate the dialog box OK when i hard code the Sketched Symbol definition. The issue i have is the sketched symbol may have been inserted 3, 5 or more times and i need to extract the text from the last inserted definition. So by setting a simple counter i can count how many time the Sketched Symbol has been inserted and then by running the code below i can read the text.
Set oPESS = oPEDoc.ActiveSheet.SketchedSymbols.Item(oCount)
oSSPE1 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(1))
oSSPE2 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(2))
oSSPE3 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(3))
oSSPE4 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(4))
All fine so far but and here is the real issue if ther have been other sketched symbols inserted in to the IDW the code above doesn't work.
What i need is a single line to replace the first line in the above code that will allow me to define the sketched symbols name and then by using the .item(oCount) (as above)to say this one extract the text from that sketched symbol.
At my office we create drawings with lots of added text and sketched symbols usually along the extension line of a dimension. Currently we have to place the symbol then edit the rotation to make it parallel to the dim line. How to make the sketched symbol automatically orientate itself correctly?
Take this one step further, some ilogic that would automatically add the correct symbol to the dim line based on the feature? For example, when we place a dim on the face of a flange, have the F.O.F. text automatically inserted on the dim line? Or if you dim to a 2" pipe have the 2" CL symbol add automatically?
I have a lot of small parts to generate and I need to put them on A0 sheets. I have created customer borders (4 pane, 6 pane & so on), so that I can place multiple parts on one sheet.
I have several bits of information that is unique to each part, but must be indicated, so I have created sketched symbols that has model properties in. Effectively each pane on the sheet has it's own "mini title block" that displays the information unique to each part.
I also have assemblies, so therefore I need to display the BOM. I find that the BOM for the assembly "snaps" neatly into the corner of each pane, but I don't seem to be able to get the same effect with the sketched symbols. The positioning of the sketched symbols look "tatty" and once it has a leader attached (which I switch to not visible), the sketch symbol seems to snap to some sort of invisible grid.
Ultimately, I will be delivering the drawings in AutoCAD format so it will be possible to zoom up and see these mis-alignments very clearly. That makes things look very unprofessional.
Any way to position the sketched symbols neatly.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
I am currently working on creating new symbols. Now I want to keep the look of the symbol (see attached) but I want all the text to be automated as the text is currently "prompted entry".
Now when I go into the edit the text within the symbol sketch, I need the "view label properties" from the drop down menu but its not there! Is there a way that I can get the "view label properties" into the drop down menu??? What I am after is to attach this symbol to a view and the symbol will automatically show the name of the view and the scale.
OR........ If there is any way that I can get default view label to look like my symbol?
I have several sketched symbols that I use with references to various properties embedded in them. Once of these is a sketch block that picks up the part number, description and so on. In order to get this to work, I place the sketch block and drag the leader to point to the part.
For assemblies the process clearly needs to be different. If I have various parts and assemblies shown on one sheet, how can I use a sketched symbol to pick up the ASSEMBLY number from one of the view.
Parts are fine (as explained above), but when I place a sketched symbol and do not attach the leader it picks up on the part number of the first component / assembly placed on the sheet.
I would like to have a sketched symbol reference a specific assembly, and list all its properties (i.e. part number, description, mass and so on).
Is there a way to do this? Please consider there could be more than one view on the sheet that has an assembly (or a part for that matter). I think I am looking for a way to link the sketched symbol to the assembly or specific view.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
All of a sudden, things in my inventor sketches are approximately double normal size - the UCS symbol, dimensions, constraint symbols. The UCS icon stays oversize regardless of the environment.
I went into Application Options, Sketch tab, and changed the Constraint and DOF symbol scale but it has no effect in the sketch environment. It's not confined to a single part or assembly and I have not, to my knowledge, changed any Windows or other Inventor setting.
I feel like I've stumbled into the Readers Digest Large Print edition of Inventor. How to control the size of these things?
How do I make a callout and insert it under User/Symbols tab?
View 1 Replies View RelatedI am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedI have created various symbols to be placed into drawings when required, rather than having to re-create the same sketch every time the drawing is produced.
When I place the symbol I am given the option to select where to insert it, based on the insertion point. The problem is... once the symbol is placed there is no way (that I can figure out) to constrain to the view or dimension to it.
I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected.
[Code] ......
The company I am working for has dragged their CAD kicking and screaming into the late nineties and have upgraded to 3D! Recreate their drawings using 3D models, I have noticed the symbol gallery doesn't provide such things as Rev Balloons or Rev Triangles.
View 1 Replies View RelatedI have a need to send files saved from Inventor.dwg to AutoCAD.dwg to suppliers, however due to the quantity of files "size", I need to purge them in Autocad before I e-mail. The problem I have is that my template Inventor.dwg is 1 mg due to Sketch Symbols, plus added file size for the views etc. When I get to Autocad to purge them, my Sketch Symbols and Title Block is on the "0" Layer. I have to select everything that is on the "0" Layer and change the layer to a different layer to start a LISP routine that does a, Erase All, Purge All, to get my file size down. I have not found a way to change the layer that Sketch Symbols are created on or reside on by default or Title Block either.
Any way to do this Inside the Sketch Symbols, inside the Title Block, using the styles, anything?
I am just now going through a iLogic course and read that Layers can be hidden. Can iLogic be used to change the layer of "SketchSymbols" or "TitleBlocks" and or used to purge all Sketch Symbols during the SaveAs to Autocad.dwg process?
I was looking to change the fonts in a drawing for the Dimensions and Symbols that might have been inserted in the Dimension text entries.
This can be done manually bu editing the dimentions text after placemement, but I was ooking to set this as a default.. I cannot see where exactly this is controlled in the Styles Manager - I am only able to change the Dimension text font but the diameter symbol font is always on AIGDT.
I was therefore looking for an iLogicvb code that could do the trick, but I am not able to even change the dimension fonts... The code runs with no errors but nothing gets updated in the drawing...
Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
[Code]....
InventorVb.DocumentUpdate()
The second line of fields for text are missing for one half of the welding symbols - See attached picture. my paint scrawling.
View 2 Replies View Relatedit's possible to export informations stated in "tailing note box" from all welding symbols? The reason why I'd like to do it...it's because each weld in the drawing has his own number and I'd like to be able to work with these weld numbers in MS excel. It means I'd like to be able to export all the weld numbers and also to change these weld numbers in the drawing via MS excel.
View 1 Replies View RelatedPossible to export all the P&ID symbols from AutoCAD P&ID 2012 and use them is the normal AutoCAD 2012 as blocks?
Maybe they are in a different format.
I am currently working with a company who is attempting to design AutoCAD symbols for an outside food service company.
How common is it to produce 2D symbols as well as 3D symbols? And, if 3D symbols are common, what programs are easiest/best to use?
Additionally, what are the standard set of views for the symbols? Just overhead? Or overhead and profile?
A consultant (of our office roofing department) provided CAD drawings of roofs depicting various roof symbols to represent equipment, this survey was years ago so I had no hands in it. The office roof inspector is hoping I may be able to change all the symbols to be industry standard symbols as the consultant used their own. Originally I told the roofing department it would be easy as I would just write a lisp and a script to change all the symbols to the new blocks...or so I thought.
As soon as I opened one of the consultant's files, those symbols...were not blocks, they were all comprised of lines, circles and hatches. In my frustration, I contacted the consultant and wanted a clarification on this, they simply drew the lines in and copied and pasted the symbols over and over again.
I got 240 drawings to literally update overtime. Each drawing can have an average of 30 symbols. Is there a way for autocad to recognize certain line patterns or hatch patterns (actually only the solids were used) and then store the x,y co-ordinates?