Is it possible to insert symbols into a table in Inventor 2011? I have a table set up that handles tabulated dimensions, and I need to be able to insert symbols, such as diameters, degree marks, +/-, etc.
View 4 RepliesHow to insert the point table into paper space rather than model space and creating a mview?
Also, is there a way to add the point style symbol to the table?
I am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedI insert Content Center part, for example I have a hexagon bolt. For example I chose the hole diameter but did not take the surface. In this case Inventor pop up the table with possible list of fit bolts.
The question is: How to alter this table by choosing the columns of this table?
For some items it is too big, I wish I can choose only required columns for custom items.
[URL] .....
Columns in this table do not fit for Key, Expression, Property, iProperties filters of Content Center Family Table.
I work for an electrical company, so obviously there's plenty of symbols that are used on our drawings. Now, I want to create a legend of all the symbols we use, but I want to put them in a table. Is there any way of doing it, so that rows can be hidden but not lost from the table?
View 6 Replies View RelatedWhen working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
View 1 Replies View RelatedI created a dynamic block table and I try to insert into a drawing, however, it doesn't work, all block data are gone.
View 4 Replies View RelatedI have a drawing with 3 table styles I've saved that I can usually insert into my drawings using design center when I need them. Normally all three come in fine, occasionally only two will come in. I have a drawing that I am trying to insert my table styles into and none of them are inserting! I don't know if there's a setting preventing this command or what.
View 1 Replies View RelatedThe angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
Is there a way to update a symbol of one type, without the changes being applied to all symbols of that type in the drawing?
Example: If I have three Flag Note symbol's in my drawing from the same sketch symbol and the text reads 1, is there a way that I can change the text to read 2 in one of them without the other two flag notes updating as well?
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800
We are using Inventor 2012 professional, 2 seats. When we create a .dwg or .dwf file and dimension our parts the Diameter and Angle symbols print as the letter 'P".
The symbols show on the screen correctly, but do not print?
I want to replace view labels in drawings with sketch symbols to get a different appearance to my drawings. (As far as i know it is not possible to change the appearance of the standard view label.) See attached snap of my desired view label.
I have used i logic on several occasions successfully but im not experienced at all. The way I see this working is for a sketch symbol to be inserted below a view when it is created,the standard view label being omitted & the Scale/Name/Sheet details linking to the sketch symbol through parameters.
I am creating a weldment that is controlled using parameters that are linked to an Excel spreadsheet (using Inventor 2012). One of my parameters is the size of the weld bead. I am able to add the parameter to change the visible size of th fillet and groove welds but am unable to have the weld symbols update to show the parameter value. How to add the parameter to the weld symbols? Or is this not possible?
View 1 Replies View RelatedI have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?
View 4 Replies View RelatedI'm running 2014. Somehow, in my ignorance, I have managed to turn off the constraint symbols that show up beside the cursor as I'm sketching.
View 1 Replies View Related1) Is it possible to add a pull down menu in a prompted sketched symbol to select predetermined values instead of typing them ourselves? I would like for the symbol to behavior to be similar to a cad dynamic block.
2) I'm looking to know if we can add simple rules in prompted entries? What I wish to accomplish is to have a default value that fits our need 80% of the time and for exceptions we can write in a different value when prompted. I know we can edit text after inserting symbols but we are rushed quite often and manual editing can be forgotten.
I was working with inventor 2010, and i am want to link surface roughness symbols and text. so that they will be grouped together.
View 1 Replies View RelatedI am having a small issue with getting the correct text from a sketched symbol in an IDW. I can populate the dialog box OK when i hard code the Sketched Symbol definition. The issue i have is the sketched symbol may have been inserted 3, 5 or more times and i need to extract the text from the last inserted definition. So by setting a simple counter i can count how many time the Sketched Symbol has been inserted and then by running the code below i can read the text.
Set oPESS = oPEDoc.ActiveSheet.SketchedSymbols.Item(oCount)
oSSPE1 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(1))
oSSPE2 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(2))
oSSPE3 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(3))
oSSPE4 = oPES.GetResultText(oPES.Definition.Sketch.TextBoxes.Item(4))
All fine so far but and here is the real issue if ther have been other sketched symbols inserted in to the IDW the code above doesn't work.
What i need is a single line to replace the first line in the above code that will allow me to define the sketched symbols name and then by using the .item(oCount) (as above)to say this one extract the text from that sketched symbol.
At my office we create drawings with lots of added text and sketched symbols usually along the extension line of a dimension. Currently we have to place the symbol then edit the rotation to make it parallel to the dim line. How to make the sketched symbol automatically orientate itself correctly?
Take this one step further, some ilogic that would automatically add the correct symbol to the dim line based on the feature? For example, when we place a dim on the face of a flange, have the F.O.F. text automatically inserted on the dim line? Or if you dim to a 2" pipe have the 2" CL symbol add automatically?
I have a lot of small parts to generate and I need to put them on A0 sheets. I have created customer borders (4 pane, 6 pane & so on), so that I can place multiple parts on one sheet.
I have several bits of information that is unique to each part, but must be indicated, so I have created sketched symbols that has model properties in. Effectively each pane on the sheet has it's own "mini title block" that displays the information unique to each part.
I also have assemblies, so therefore I need to display the BOM. I find that the BOM for the assembly "snaps" neatly into the corner of each pane, but I don't seem to be able to get the same effect with the sketched symbols. The positioning of the sketched symbols look "tatty" and once it has a leader attached (which I switch to not visible), the sketch symbol seems to snap to some sort of invisible grid.
Ultimately, I will be delivering the drawings in AutoCAD format so it will be possible to zoom up and see these mis-alignments very clearly. That makes things look very unprofessional.
Any way to position the sketched symbols neatly.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
I am currently working on creating new symbols. Now I want to keep the look of the symbol (see attached) but I want all the text to be automated as the text is currently "prompted entry".
Now when I go into the edit the text within the symbol sketch, I need the "view label properties" from the drop down menu but its not there! Is there a way that I can get the "view label properties" into the drop down menu??? What I am after is to attach this symbol to a view and the symbol will automatically show the name of the view and the scale.
OR........ If there is any way that I can get default view label to look like my symbol?
I have several sketched symbols that I use with references to various properties embedded in them. Once of these is a sketch block that picks up the part number, description and so on. In order to get this to work, I place the sketch block and drag the leader to point to the part.
For assemblies the process clearly needs to be different. If I have various parts and assemblies shown on one sheet, how can I use a sketched symbol to pick up the ASSEMBLY number from one of the view.
Parts are fine (as explained above), but when I place a sketched symbol and do not attach the leader it picks up on the part number of the first component / assembly placed on the sheet.
I would like to have a sketched symbol reference a specific assembly, and list all its properties (i.e. part number, description, mass and so on).
Is there a way to do this? Please consider there could be more than one view on the sheet that has an assembly (or a part for that matter). I think I am looking for a way to link the sketched symbol to the assembly or specific view.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
All of a sudden, things in my inventor sketches are approximately double normal size - the UCS symbol, dimensions, constraint symbols. The UCS icon stays oversize regardless of the environment.
I went into Application Options, Sketch tab, and changed the Constraint and DOF symbol scale but it has no effect in the sketch environment. It's not confined to a single part or assembly and I have not, to my knowledge, changed any Windows or other Inventor setting.
I feel like I've stumbled into the Readers Digest Large Print edition of Inventor. How to control the size of these things?
How do I make a callout and insert it under User/Symbols tab?
View 1 Replies View RelatedI have created various symbols to be placed into drawings when required, rather than having to re-create the same sketch every time the drawing is produced.
When I place the symbol I am given the option to select where to insert it, based on the insertion point. The problem is... once the symbol is placed there is no way (that I can figure out) to constrain to the view or dimension to it.
I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected.
[Code] ......
The company I am working for has dragged their CAD kicking and screaming into the late nineties and have upgraded to 3D! Recreate their drawings using 3D models, I have noticed the symbol gallery doesn't provide such things as Rev Balloons or Rev Triangles.
View 1 Replies View RelatedI created a Ipart with like 14 different configurations now it operates smoothly within the part. Now once i insert it into a assembly it wont let me chance the configuration. I heard there was a problem like this but i thought it was only when you insert a part into a assembly and change it into a ipart while its still within a assembly.
Now my part never was in a assembly. Ill upload it and let me know if you have the same issue. Once i drop the part it doesn't give me the option to choose a configuration and when i click the configuration in the itable it still doesnt change it. Now this is only within a assembly.
I want to insert simple JPEG images into IDW drawings but the button for images is grey and cant be used.
I tried in sketch mode but it is the same grey button
Seriously is this not available?
Or whats the "trick" to insert a simple image?
i got a good one, just installed 2013 and vault upgrades, and all WAS fine until we found a issue. If i trying opening a MODEL (ASSEM OR PART) from the vault server, (not locally), it ill work...yeah....NOW if i do the same thing BUT browser down 3 sub folders, it will crash....fo example, if i browse to ....Railpower ProjectsNew NomenclatureHARDWARE CATALOGCATALOG BB007. choose any part...poof.. good bye inventor. This happens at any folder at 3 levels deep...with any part or assembly. we have do this with about 100+ senerios - different parts - different assemblies. the only thing constant is after going 3 folders deep (or more) it will crash
View 4 Replies View Related