The company I am working for has dragged their CAD kicking and screaming into the late nineties and have upgraded to 3D! Recreate their drawings using 3D models, I have noticed the symbol gallery doesn't provide such things as Rev Balloons or Rev Triangles.
View 1 RepliesHow do you show associated BOM quantities on balloons in the drawing?
View 7 Replies View RelatedWe want to ensure that a balloon callout exists for every item in the parts list (BOM) in our assembly drawings. Is there a way to easily do this?
Currently, if we have an assembly with 30 parts, we manually search for each of the 30 BOM balloon to verify that none were missed. Since the balloons are not in order, balloon 5 could be on page 2 while 6 is on page 8. This method is often time-consuming and error prone.
It probably goes without saying, but if ballons are missed, then assemblers have nothing to show them were the parts go and either come ask us or guess.
I've got a drawing with multiple base views wich means multiple reference models. In my titleblock i've included the mass of my model through
Type: Physical Properties - Model
Property: MASS
But now it automaticly selects the first placed base model as the model to select the mass. how can i change the 'active' model to another model/base view?
With reference to the standard hydraulic symbols which are contained within the library in Autocad 2013,
To which standard they conform i.e. : ISO 1219-1 ?
I am struggling to edit the standard set of blocks that comes with AutoCAD such as receptacles junction boxes etc. I want to edit the standard blocks and then save my changes for future use. Right now the blocks come in at different sizes then I would like. I try to edit them in the block editor however the changes I make do not apply to any other or new drawings that I make.
I have attached an image of the differing symbols and sizes. I want them to be consistently sized.
I'm trying to draw standard flat head socket cap screw size 1/4-20 with 5/8 length. I've tried to draw it with the exact dimensions (converted inches to mm) but the head doesn't turn up correctly.
I've done metric screws with dimensions from that site (mcmaster-carr) and they turned out just right.URL....
I'm new to the style library and how to take an existing drawing that was created on one standard, and changing it to another standard I just created. The new standard has different dimension styles, text, and layers. I've added all the styles to my style library and I've set the new standard to the active standard in both the styles and standards editor and the document settings. If I create a new view, it comes in on the new standard, but the existing views are still on the old. How to I get the existing views on the new standard?
View 2 Replies View RelatedI have created various symbols to be placed into drawings when required, rather than having to re-create the same sketch every time the drawing is produced.
When I place the symbol I am given the option to select where to insert it, based on the insertion point. The problem is... once the symbol is placed there is no way (that I can figure out) to constrain to the view or dimension to it.
I am trying to have one drawing with B size and E size sheets I am trying to get the border, title block and standard to change when the sheet format changes. I can get it to work when I run the rule but have hard time find information to just change when sheet format changes. And I can't find anything or I should say a sample of how to. I think I found the code just don't know how to make it work. Here is what I have so far.
SubMain()
IfActiveSheet.Size="E"Then
ActiveSheet.TitleBlock="G&T (E)"
ActiveSheet.Border="G&T Border (E)"
EndIf
IfActiveSheet.Size="B"Then
[code].......
I am currently endeavoring to translate some (very) old print drawings of standard geometry used by my company to electronic format with Inventor. Many of these standards include a matrix of certain dimensions (noted by a letter variable on the drawing, such as "A") and what their values should be, given the required size of the geometry's main feature, like the cross section of an o-ring that is supposed to go with it. Is it possible to build such variable/multiple value dimensions in Inventor and have a corresponding matrix printed on the drawing with it?
View 1 Replies View RelatedInventor 2013-
Is there a way to pin or standardize where a revision table is located in a drawing?
I have a title-block set up and would like a revision table either embedded or populated upon command, just above my title-block. It would also need to extend upward with additional revisions...
I was looking to change the fonts in a drawing for the Dimensions and Symbols that might have been inserted in the Dimension text entries.
This can be done manually bu editing the dimentions text after placemement, but I was ooking to set this as a default.. I cannot see where exactly this is controlled in the Styles Manager - I am only able to change the Dimension text font but the diameter symbol font is always on AIGDT.
I was therefore looking for an iLogicvb code that could do the trick, but I am not able to even change the dimension fonts... The code runs with no errors but nothing gets updated in the drawing...
Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
[Code]....
InventorVb.DocumentUpdate()
1. I have my timline. There is a button. I have made a symbol. This symbol should not be visible at the start. If I click the button it should make the symbol visible and start it.
So... What is the code I should give my button? Should the sybol be on the timeline? Should it be turned off or should I just turn off autoplay?
What I have so far is:
The symbol is in the timeline. It is set "on" and I can make it play with:
sym.getSymbol("mySymbol").play(0);
So far so good. My problem now is that the symbol should be over my button. So it is not possible to press it. So logically the symbol should be turned "off" (then I can click the button under it) and when I click the button the symbol should turn on and then play. So actually what is the code to turn it "on"?
2. I have a button in a symbol. Can this button controll the main timeline. It should for example got to frame Number 30 on the main timeline. Is that possible? What is the code I have to give the button?
I tried so many stuff and it wont work. I am new to edge and java script etc.
i am trying to add as a breakline. i have not been able to get this particular line to work as a breakline and the surface keeps drawing triangles through the line like its not even there. The figure properties show that it is a breakline. The figure prefix database brings the line style in as a breakline from the start.
View 5 Replies View RelatedI have created a drawing of a jug from a CAD learning manual, however when I enter HIDE mode the tessellation lines show as triangles, not rectangles as shown on the image in my book.
It appears fine before HIDE (horizontal and vertical lines only) -- I've tried FACETRES but that just creates a higher amount of triangles during hide.
Is there a way to adjust how it's shown in HIDE mode?
I have attached 2 images (or tried to!):
1 - Before HIDE.
2 - After HIDE.
I need 2 to look like 1 on the surface.
J1.jpgJ2.jpg
When working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
View 1 Replies View RelatedI am having an issue with an xref in one of my drawings. There are AEC_WALL objects in the xref file but in my drawing they show up as small triangles with an exclamation mark inside.
View 2 Replies View RelatedI have a situation where there was a modified balloon with an overridden part number that was causing some confusion. Is it possible to toggle a setting, like how you can select Overridden Inventor dimensions, to find any overridden balloon objects? Need to save some time performing a manual, visual search.
View 5 Replies View RelatedI want to add the Balloon Renumbering function to our templates using iLogic, but when I run it I get an error message saying: "The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))". I have narrowed it down and think it has to do with the following line: partInfo(i - 1).Number = drawBOMRow.Item(itemColumn).Value. When I remove that line I don't get an error message, but every balloon is set to item no 0. The function I want to achieve with the code is to renumber separate part files against the assembly BOM.
Public Structure udtPartInfo Public udNumber As Integer Public ReferencedFile As String End Structure Sub Main() Dim drawDoc As DrawingDocument drawDoc = ThisApplication.ActiveDocument Dim baseSheet As Sheet baseSheet = drawDoc.Sheets.Item(1) Dim valSet As BalloonValueSet
[code]....
Any easy or more reliable way of getting balloons to stay in the direction you want?
In the image i've attached you can see what normally happens when dragging a balloon in position on the left and what i desire (and accomplish after a lengthy fight) on the right.
Is there a way to make a balloon (3.30.4 in this case) go into the desired direction without having to fight with it?
Using IV2014 Pro SP1 update 1, Win7-64bit
(check out the attached .bmp for clarity)
I need to either add a custom balloon to a 3D wiring harness (made of individual wires) or add a split balloon (showing item number then sheet number) to my layout. What I have now is a 3D harness with all my connectors shown on it and a balloon calling out what connector it is. I want to attach a custom split balloon to my connector callouts to reference the wire and sheet number of another sheet in the same project. I should also mention that there are tons of connectors that as far as Inventor is concerned is the same model.
I've already created a user symbol to attemp to work around it but I can't attach the custom symbol to the existing balloon.
Secondly, why can't I attached a balloon to the 3D harness anyway. I also can't add a balloon to the nailboard view either!
I want my custom property to defined as item #. That Item # then is represented in the balloon.
reasoning is that then engineers wont have to check drawings anymore for the guess work involved in matching the part balloon to each individual part in the assembly being called out.
I can then focus on creating a BOM that shows the different item#'s and the user can quickly go through it.
know if we can now attach Balloons to sketched geometry in the .idw in 2012?
View 2 Replies View RelatedHow to make Quantity to be represented less precise in the balloon.
I mean to make less zeros after the dot. The upper balloon row is Quantity.
In Inventor 2012, you could choose Balloon, select a part, click at some location and the Balloon was placed and finished. Now in Inventor 2013 you have to right-click and choose Continue. The same applies, when you want to place a Leader Text (and maybe elsewhere as well).
Why do we suddenly have to make two additional clicks compared to Inventor 2012. It doesn't work, that you can press Enter instead of the additional mouse clicks.
And why is the Open Drawing moved to second level. The Marking Menu is of no use, especially not in the tree browser.
Why do you Inventor designers make such changes that make Inventor more annoying to operate compared to the previous version. It should be the other way around....like the brilliant inclusion of Open Drawing.
I just had to reinstall AutoCAD this week for being a very bad boy. Now, when I switch between open files, my screen goes blank. It takes a regen to get all my stuff to appear again.
It even goes blank in my viewport... I have to go into the viewport and regen separately from the main drawing.
When I either attach or overlay my Xrefs they always appear dark in my drawing; is this normal? If I open the file (that I am xreferencing in) it is very clear.
View 3 Replies View Relatedwhat I'm doing wrong when the plan I'm trying to 'x-ref' into the main drawing appears all stretched (and massively overscaled).?
View 7 Replies View RelatedHow do I delete the AutoCad block symbols that are stored inside my drawing?
Not blocks that have been created that you can see on your drawing it’s the blocks that the point styles use and are stored in the drawing.
If there is a British standards for drawing symbols for electrical, fire, security, lighting etc. Seen so many different ones to use and is there a web site i can go on that would show me the correct symbols i should use.
View 9 Replies View Related