I have a situation where there was a modified balloon with an overridden part number that was causing some confusion. Is it possible to toggle a setting, like how you can select Overridden Inventor dimensions, to find any overridden balloon objects? Need to save some time performing a manual, visual search.
View 5 RepliesIf I override the text in a parts list, say to rename a part number.How can I make Inventor revert back to the original listed part number?I've tried deleting and inserting the parts list, but it still has the overridden Text.
View 1 Replies View RelatedI want to add the Balloon Renumbering function to our templates using iLogic, but when I run it I get an error message saying: "The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))". I have narrowed it down and think it has to do with the following line: partInfo(i - 1).Number = drawBOMRow.Item(itemColumn).Value. When I remove that line I don't get an error message, but every balloon is set to item no 0. The function I want to achieve with the code is to renumber separate part files against the assembly BOM.
Public Structure udtPartInfo Public udNumber As Integer Public ReferencedFile As String End Structure Sub Main() Dim drawDoc As DrawingDocument drawDoc = ThisApplication.ActiveDocument Dim baseSheet As Sheet baseSheet = drawDoc.Sheets.Item(1) Dim valSet As BalloonValueSet
[code]....
Any easy or more reliable way of getting balloons to stay in the direction you want?
In the image i've attached you can see what normally happens when dragging a balloon in position on the left and what i desire (and accomplish after a lengthy fight) on the right.
Is there a way to make a balloon (3.30.4 in this case) go into the desired direction without having to fight with it?
Using IV2014 Pro SP1 update 1, Win7-64bit
(check out the attached .bmp for clarity)
I need to either add a custom balloon to a 3D wiring harness (made of individual wires) or add a split balloon (showing item number then sheet number) to my layout. What I have now is a 3D harness with all my connectors shown on it and a balloon calling out what connector it is. I want to attach a custom split balloon to my connector callouts to reference the wire and sheet number of another sheet in the same project. I should also mention that there are tons of connectors that as far as Inventor is concerned is the same model.
I've already created a user symbol to attemp to work around it but I can't attach the custom symbol to the existing balloon.
Secondly, why can't I attached a balloon to the 3D harness anyway. I also can't add a balloon to the nailboard view either!
How do you show associated BOM quantities on balloons in the drawing?
View 7 Replies View RelatedI want my custom property to defined as item #. That Item # then is represented in the balloon.
reasoning is that then engineers wont have to check drawings anymore for the guess work involved in matching the part balloon to each individual part in the assembly being called out.
I can then focus on creating a BOM that shows the different item#'s and the user can quickly go through it.
We want to ensure that a balloon callout exists for every item in the parts list (BOM) in our assembly drawings. Is there a way to easily do this?
Currently, if we have an assembly with 30 parts, we manually search for each of the 30 BOM balloon to verify that none were missed. Since the balloons are not in order, balloon 5 could be on page 2 while 6 is on page 8. This method is often time-consuming and error prone.
It probably goes without saying, but if ballons are missed, then assemblers have nothing to show them were the parts go and either come ask us or guess.
know if we can now attach Balloons to sketched geometry in the .idw in 2012?
View 2 Replies View RelatedHow to make Quantity to be represented less precise in the balloon.
I mean to make less zeros after the dot. The upper balloon row is Quantity.
In Inventor 2012, you could choose Balloon, select a part, click at some location and the Balloon was placed and finished. Now in Inventor 2013 you have to right-click and choose Continue. The same applies, when you want to place a Leader Text (and maybe elsewhere as well).
Why do we suddenly have to make two additional clicks compared to Inventor 2012. It doesn't work, that you can press Enter instead of the additional mouse clicks.
And why is the Open Drawing moved to second level. The Marking Menu is of no use, especially not in the tree browser.
Why do you Inventor designers make such changes that make Inventor more annoying to operate compared to the previous version. It should be the other way around....like the brilliant inclusion of Open Drawing.
The company I am working for has dragged their CAD kicking and screaming into the late nineties and have upgraded to 3D! Recreate their drawings using 3D models, I have noticed the symbol gallery doesn't provide such things as Rev Balloons or Rev Triangles.
View 1 Replies View RelatedIt seems there are several ways to search hard coded (overridden) dimensions. However, the FIND command does not locate dimensions that are not overridden.
Example, I want to find all dimensions that are 12'-0". If I 'FIND' 12'-0", it will only locate dimensions that I have forced to 12'-0".
If you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View RelatedTrying to create a multileader callout that doesn't have a landing and the leader axis passes through the center of the ballon circle and not the side. Most the CAD applications I have worked with don't use leaders with "Landings".
View 3 Replies View RelatedI was looking for a tutorial to make balloons and I found a link in here by Jeff that showed one, but the link is no longer active. If anyone can help me make these balloons I would really appreciate it. Currently I only have PSE 4 but am hoping to soon get PSCS2.
View 9 Replies View RelatedIf you have two balloons falling down on each other, can mCloth interact with the balloons or can the balloons only react to a item like a rigid block?
View 1 Replies View RelatedCan you create speech balloons in editing VS Pro X5 video clips?
View 4 Replies View RelatedI'm writing a tool to change iproperties in the titleblock.
But now we start using two different types of titleblocks.
I need to check which titleblock is present in the current sheet/drawing.
I use this code to place a titleblock:
Call Doc.ActiveSheet.AddTitleBlock("sample_titleblock")
How do I check if "sample_titleblock" is already present?
Autodesk Inventor Product Design Suite 2013 SP1.1
I would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
View 1 Replies View Relatedi dont know how to use or find the PCD function. All i have is a base however i need to make holes with 90 degrees on a 100 PCD
View 2 Replies View RelatedI can get the DWG translator Add-In with :
Inventor.TranslatorAddIn dwgAddIn = (Inventor.TranslatorAddIn)InventorOpen._invApp.ApplicationAddIns.get_ItemById("{C24E3AC2-122E-11D5-8E91-0010B541CD80}");
But I can't find ID for JPG.
I have some drawings with lots of dimensions. Is there a way to check if any have been over ridden or a global way to set all dimensions to model value?
View 2 Replies View RelatedIn my project file, under design data folder options, I have it set to c:designsStandardsStyles. This is where I have my thread.xls located.
When I try to place a threaded feature, Inventor gives me a warning that it cant find the Thread.xls file.
It is looking for this file in c:DesignsStandardsStylesXLSen-USThread.xls. Where is it getting this path from?
I'm trying to write a VBA macro (for Inventor 2010) that would have to work on drawing .idw files that are generated from a given component.So when I have an open assembly document, I want to go through all component occurences and work with the associated drawing.
There's a built in command in Inventor for that, in the context menu, something like "Open drawing" (mine is german, so not sure how it's called in english), which does this. It opens the drawing of the given part. From this I assumed, there must be a reference within each part, that points to the referencing drawing.
But I'm not able to find this information anywhere within the properties/objects of any component.how or where can I get this information out of the components?
I've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies View RelatedIn Inventor, I want to look for a table called "MS6 Report". If the table exists, I want to get its coordinates, and delete the table. If it doesn't exist, I'd just like to let the user place a table. How can I check if a customtable by this name already exists in the document? Here is what I have so far...
if (aDoc.ActiveSheet.CustomTables.Equals("MS6 Report")){//get table coordinates//delete table }else {userInteract = m_inventorApplication. Command Manager.CreateInteractionEvents();keySelect = userInteract.KeyboardEvents;keySelect.OnKeyDown += new Keyboard EventsSink_ OnKey Down EventHandler(keySelect_OnKeyDown);mouseSelect = userInteract.MouseEvents;mouseSelect.OnMouseDown += new MouseEventsSink_ OnMouse DownEventHandler(Table_Update_Placement); }
The else statement works great. No problems there. How can I find, get coordinates of, and delete a custom table by the name of "MS6 Report"?
how to identify the model associated with a particular PL on a drawing. I'm able to find a PL and write to the header which is cool. But I'm trying to determine the model associated with the BOM pipline so I can get it's P/N iproperty and write that to the PL header.
View 2 Replies View RelatedI have a .ipt part, and am trying to determine any assemblies which use it. Is there a way to figure out all of the assemblies in which this part is a component?
View 1 Replies View RelatedHow to find files from 3D Scanner?
I want to try Point cloud.
Trying to have ilogic find parts in an assembly that start with 900C7 so I can link the to a cell in excel showing the QTY and the LENGTH..
Right now I am just trying to get ilogic to find and list them then I know I can move to the next step..
Example:
900C71.250
900C72.125
900C7A.750
900C7P1.1875
And many more.
Here is what I have but it keeps posting the NOTHING message box. I have a few of the parts in the assembly and a few none 900C7 parts.
Dim openDoc As Inventor.DocumentDim docFile As Inventor.DocumentDim assemblyDoc As AssemblyDocumentDim partOcc As ComponentOccurrenceDim FNamePos As LongDim docFName As StringDim oList As Collection = New CollectionopenDoc = ThisApplication.ActiveDocumentIf openDoc.DocumentType
[Code] .....
Here is a screen shot of the excel file what I am trying.