AutoCad :: Change Direction Of Balloons
Oct 17, 2013If you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Getting Balloons To Stay In Desired Direction?
Nov 8, 2011Any easy or more reliable way of getting balloons to stay in the direction you want?
In the image i've attached you can see what normally happens when dragging a balloon in position on the left and what i desire (and accomplish after a lengthy fight) on the right.
Is there a way to make a balloon (3.30.4 in this case) go into the desired direction without having to fight with it?
Using IV2014 Pro SP1 update 1, Win7-64bit
AutoCad 2D :: How To Change Direction In Run Direction Of Baluster Panel
Apr 21, 2011I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedAutoCAD Map 3D :: Change Direction Of A Line Feature?
Aug 26, 2012How can I change direction of a line feature? Have any redy default command to do it?
View 8 Replies View RelatedAutoCAD Inventor :: How To Change Section Direction
Oct 16, 2013In an assembly, i make a half section view, but i want the other side to be seen.
I want only to change the direction of the view, how can i do that?
AutoCAD VB :: How To Change Vertical Direction Stretch Value
Oct 3, 2013how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....
AutoCAD Civil 3D :: Change Direction Of A Label?
Dec 4, 2013Is there a way to change the direction of a Label? I want all my text facing the same direction and some of my Labels for contours are turned the wrong direction.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
AutoCAD Civil 3D :: How To Change Alignment Direction
May 10, 2012Changing alignment path in my drawing,how can i do that? There is a pic too.
View 1 Replies View RelatedAutoCAD Inventor :: Lines In 3D Sketches Change Direction?
Aug 2, 2012I've created associative 3D sketches to use as trajectories for sweeps. I will often have to use one line extending from the end of another line. I make the two lines colinear. But when the model changes, sometimes one line will change direction and cause an overlapping condition which makes the sweep fail.
Any way to keep it from happening? Ideally, I'd create one line that extended, but you can't constrain a line to a point, only an endpoint to a point. I'm attaching the model.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCad :: Change Direction Of Leader Landing Line?
Jan 7, 2012I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
AutoCad :: Text Suddenly Changes Direction And Reads In Opposite Direction When Line Bends
May 17, 2013I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
AutoCAD Civil 3D :: Reverse Section Direction Without Changing Alignment Direction?
Jan 2, 2014I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedPhotoshop :: How Can I Change Direction Of An Image
Dec 1, 2006If I have a layer on top of another layer or say I have a custom tool shape on a page, how do I select it to change the direction is it facing. I don't want to use the roate canvas selection. I know in the past I was able to do something like alt and click the shape or image to change its direction.
View 3 Replies View RelatedIllustrator :: How To Change Text Direction To RTL In AI6
Jan 1, 2013The characters of a word in Hebrew need to reverse their text direction despite the font being Adobe Hebrew which you would expect to be in the correct direction. However this text was copied in from Word.
I can't locate the menu option, e.g. Window>Type>Paragraph fails to show any RTL option. That the text is selected seems indicated by the bar at the top of the screen showing point size etc.
CorelDRAW X5 :: Pen Tool - Change Node Direction
Feb 17, 2012what gives here with Corel's so-call Pen Tool. First there's almost NOTHING out there in terms of tutorials etc. Plenty about the Bezier tool but truly hardly anything about the Pen Tool
How on earth do you change the node's direction? This is SO frustrating! I just wanna control this *** but I can't. In Adobe PS it's simple, just hit ALT and you're back to 0 angle. In Corel I read somewhere that you double click the last node......yeah that ends it alright but when you go back to continue at a different angle it goes back to the same angle all over again so it's literally useless.
Photoshop :: Change Direction Of Text On Path
Mar 8, 2009how to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies View RelatedIllustrator :: Change Direction Of Perspective Text?
Feb 7, 2013I have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedIllustrator :: Change Direction Of Gradient Stroke?
Jun 20, 2013Why is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
View 2 Replies View RelatedRevit :: Change Direction Of Model Hatch That Is Seen In 3D View?
Dec 22, 2011How do you change the direction of a model hatch that is seen in 3D view?
I want to change the pattern of wood planking that goes horizontally to go vertically (in plan view).
Illustrator :: Keeping Angle Of Direction Line While Dragging Direction Point?
Mar 19, 2014I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
AutoCad :: Multileader Using Balloons (circles)
Mar 2, 2012Trying to create a multileader callout that doesn't have a landing and the leader axis passes through the center of the ballon circle and not the side. Most the CAD applications I have worked with don't use leaders with "Landings".
View 3 Replies View RelatedAutoCAD Inventor :: Find Overridden Balloons
Mar 11, 2013I have a situation where there was a modified balloon with an overridden part number that was causing some confusion. Is it possible to toggle a setting, like how you can select Overridden Inventor dimensions, to find any overridden balloon objects? Need to save some time performing a manual, visual search.
View 5 Replies View RelatedAutoCAD Inventor :: Renumber Balloons For ILogic?
Sep 1, 2011I want to add the Balloon Renumbering function to our templates using iLogic, but when I run it I get an error message saying: "The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))". I have narrowed it down and think it has to do with the following line: partInfo(i - 1).Number = drawBOMRow.Item(itemColumn).Value. When I remove that line I don't get an error message, but every balloon is set to item no 0. The function I want to achieve with the code is to renumber separate part files against the assembly BOM.
Public Structure udtPartInfo Public udNumber As Integer Public ReferencedFile As String End Structure Sub Main() Dim drawDoc As DrawingDocument drawDoc = ThisApplication.ActiveDocument Dim baseSheet As Sheet baseSheet = drawDoc.Sheets.Item(1) Dim valSet As BalloonValueSet
[code]....
AutoCAD Inventor :: Ballooning Wiring / Split Balloons
May 17, 2010(check out the attached .bmp for clarity)
I need to either add a custom balloon to a 3D wiring harness (made of individual wires) or add a split balloon (showing item number then sheet number) to my layout. What I have now is a 3D harness with all my connectors shown on it and a balloon calling out what connector it is. I want to attach a custom split balloon to my connector callouts to reference the wire and sheet number of another sheet in the same project. I should also mention that there are tons of connectors that as far as Inventor is concerned is the same model.
I've already created a user symbol to attemp to work around it but I can't attach the custom symbol to the existing balloon.
Secondly, why can't I attached a balloon to the 3D harness anyway. I also can't add a balloon to the nailboard view either!
AutoCAD Inventor :: Show Associated BOM Quantities On Balloons In Drawing?
Jan 3, 2012How do you show associated BOM quantities on balloons in the drawing?
View 7 Replies View RelatedAutoCAD Inventor :: Balloons To Call Out Custom Properties?
Oct 31, 2013I want my custom property to defined as item #. That Item # then is represented in the balloon.
reasoning is that then engineers wont have to check drawings anymore for the guess work involved in matching the part balloon to each individual part in the assembly being called out.
I can then focus on creating a BOM that shows the different item#'s and the user can quickly go through it.
AutoCAD Inventor :: Finding Missing BOM Balloons In Drawing
Jul 16, 2013We want to ensure that a balloon callout exists for every item in the parts list (BOM) in our assembly drawings. Is there a way to easily do this?
Currently, if we have an assembly with 30 parts, we manually search for each of the 30 BOM balloon to verify that none were missed. Since the balloons are not in order, balloon 5 could be on page 2 while 6 is on page 8. This method is often time-consuming and error prone.
It probably goes without saying, but if ballons are missed, then assemblers have nothing to show them were the parts go and either come ask us or guess.
AutoCAD Inventor :: Attaching Balloons To Sketched Geometry In 2012?
Jun 19, 2012know if we can now attach Balloons to sketched geometry in the .idw in 2012?
View 2 Replies View RelatedAutoCAD Inventor :: How To Alter Precision Of Values Represented In Balloons
Oct 24, 2011How to make Quantity to be represented less precise in the balloon.
I mean to make less zeros after the dot. The upper balloon row is Quantity.
AutoCAD Inventor :: Choose Continue When Placing Balloons Or Leader Text
Jul 10, 2012In Inventor 2012, you could choose Balloon, select a part, click at some location and the Balloon was placed and finished. Now in Inventor 2013 you have to right-click and choose Continue. The same applies, when you want to place a Leader Text (and maybe elsewhere as well).
Why do we suddenly have to make two additional clicks compared to Inventor 2012. It doesn't work, that you can press Enter instead of the additional mouse clicks.
And why is the Open Drawing moved to second level. The Marking Menu is of no use, especially not in the tree browser.
Why do you Inventor designers make such changes that make Inventor more annoying to operate compared to the previous version. It should be the other way around....like the brilliant inclusion of Open Drawing.
AutoCAD Inventor :: Standard Drawing Symbols - Main Rev Balloons / Triangles
Jul 5, 2012The company I am working for has dragged their CAD kicking and screaming into the late nineties and have upgraded to 3D! Recreate their drawings using 3D models, I have noticed the symbol gallery doesn't provide such things as Rev Balloons or Rev Triangles.
View 1 Replies View Related
