how to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 RepliesThe characters of a word in Hebrew need to reverse their text direction despite the font being Adobe Hebrew which you would expect to be in the correct direction. However this text was copied in from Word.
I can't locate the menu option, e.g. Window>Type>Paragraph fails to show any RTL option. That the text is selected seems indicated by the bar at the top of the screen showing point size etc.
I have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedI have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedI have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
where a tree is blocking vital building information. I would like to just stroke a selection of the outer arch here along this path. It seems I cannot make the selection into a pattern and stoke that, because it doesn't allow for rotation. So, i converted the selection into a brush, and put angle jitter to "direction" control. But it doesn't work like i would like it. It needs to be a solid stroke. I have spacing set to 1%. I am running CS2/windows. After it is finished i can adjust the color to match the original color.
View 1 Replies View RelatedI have written code for the user to select a point on the curve.I need to trace the point along the curve at certain intervals.How do i calculate the direction in which the point moves along the path.Im not using the GetPointOnCurve asit doesnt suit my requirement.
View 9 Replies View RelatedI need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.
View 8 Replies View RelatedIf I have a layer on top of another layer or say I have a custom tool shape on a page, how do I select it to change the direction is it facing. I don't want to use the roate canvas selection. I know in the past I was able to do something like alt and click the shape or image to change its direction.
View 3 Replies View RelatedI'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
I'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedIf you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View Relatedwhat gives here with Corel's so-call Pen Tool. First there's almost NOTHING out there in terms of tutorials etc. Plenty about the Bezier tool but truly hardly anything about the Pen Tool
How on earth do you change the node's direction? This is SO frustrating! I just wanna control this *** but I can't. In Adobe PS it's simple, just hit ALT and you're back to 0 angle. In Corel I read somewhere that you double click the last node......yeah that ends it alright but when you go back to continue at a different angle it goes back to the same angle all over again so it's literally useless.
How can I change direction of a line feature? Have any redy default command to do it?
View 8 Replies View RelatedIn an assembly, i make a half section view, but i want the other side to be seen.
I want only to change the direction of the view, how can i do that?
how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....
Is there a way to change the direction of a Label? I want all my text facing the same direction and some of my Labels for contours are turned the wrong direction.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Changing alignment path in my drawing,how can i do that? There is a pic too.
View 1 Replies View RelatedWhy is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
View 2 Replies View RelatedOn a windows 7 machine I am having issues with Photoshop CS6 13.0.1 x64 Extended writing in the wrong direction, its goinf RTL instead of LTR. And the Text direction button that is suppsed to be in the Paragraphs palette is missing. I deleted preferences twice and that didnt change anything. I switched back and forth between Midles Eastern and East Asian, and that did nothing as well.
I look at my laptop MBP (MAC OS X 10.6), which has PS CS6 Extended 13.0.5 x64, and I dont have the problem with it being locked in RTL, however, my laptop doesnt have the text direction button either, and doing the previous methods did not give me that option. Is there something special I have to download in order to get it or something?
Just so you know I hav read this thread, and tried all of the Methods and NONE of them worked for EITHER Operating System.Also here is a Video for Windows 7 and a video for MAC OS X and the do opposite methods switching to either to East Asian or Middle East(both videos do the oppposite).
How do you change the direction of a model hatch that is seen in 3D view?
I want to change the pattern of wood planking that goes horizontally to go vertically (in plan view).
I've created associative 3D sketches to use as trajectories for sweeps. I will often have to use one line extending from the end of another line. I make the two lines colinear. But when the model changes, sometimes one line will change direction and cause an overlapping condition which makes the sweep fail.
Any way to keep it from happening? Ideally, I'd create one line that extended, but you can't constrain a line to a point, only an endpoint to a point. I'm attaching the model.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedI have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedI created a Corel Draw template (*.cdt). Everything was working well until, for some unknown reason, the text direction for Artistic Text and Paragraph Text (and all Bullet styles) switched to right-to-left. I do not recall doing anything to cause this.
Also, the only place that I can find the text direction option is in the Text > Options > Guidelines > Styles > Edit button for fonts > Paragraph Tab (in Format Text dialog box). The text direction shows Right-to-Left and it is grayed out - not available!
My system is Hebrew enabled and Hebrew is a right-to-left language. However, I do not use and have never used Hebrew in any form in CorelDraw.
Also, there is no information at all in the User's Guide or on-line help.The words "direction" and "text" do not appear together.
2 questions:
The important one - How can I access the text direction property?
The less important one - What could I have inadvertently done to change the text direction from L-2-R to R-2-L?