AutoCAD Map 3D :: Change Direction Of A Line Feature?
Aug 26, 2012How can I change direction of a line feature? Have any redy default command to do it?
View 8 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Feature Line Flow Arrow Direction Expression
Apr 4, 2013Now, in my understanding, the flow arrow should either be rotated 0, or 180 (pi radians). But clearly, some of them like to have their own mind about things, and decide on some other rotation. It seems that on the steep slopes, the arrows go a bit skew.
I think the skew is related to the actual elevation difference of the segment, rather than the steepness of the slope. A long segment with 15% slope has a worse skew than a short segment at over 30%, presumably because the elevation difference from the start to the end of the segment is larger.
AutoCAD Civil 3D :: Reverse Direction Of Auto Feature Line Generated From Corridor In 2012?
Jun 10, 2012Can you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies View RelatedAutoCAD Civil 3D :: Changing Alignment Direction Where Feature Line And Alignment Coincide?
May 28, 2012i've made a serpantine curve that starts from one line of alignment and end on the other line.
i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?
AutoCad :: Change Direction Of Leader Landing Line?
Jan 7, 2012I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
AutoCad :: Text Suddenly Changes Direction And Reads In Opposite Direction When Line Bends
May 17, 2013I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
AutoCad 2D :: How To Change Direction In Run Direction Of Baluster Panel
Apr 21, 2011I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedAutoCAD Civil 3D :: Feature Line Labels Not Updating With Last Change
Nov 9, 2012I have a feature line that is perpendicular to another and connected to it at a PI .When I modify the elevations of one of the feature lines, the labels for slope and PI elevation of the dependent feature line do not react and update without having to invoke a REGEN.
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Feature Line Style In LISP?
Oct 24, 2013This has got to be something simple, but I can't get my head around it. I want to take a feature line that has been created by the "stepped offset" command and change its style, in LISP, of course. I have the entity name and have dumped the object, but the style of the FL is not one of them. It shows up in the properties box, but how do I get to it to change it?
View 9 Replies View RelatedIllustrator :: Keeping Angle Of Direction Line While Dragging Direction Point?
Mar 19, 2014I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
AutoCAD Civil 3D :: Change Size Of Glyph Markers On Feature Line
Jul 30, 2013Is it possible to change the size of the glyph markers on a feature line and if so how?
View 3 Replies View RelatedAutoCAD Civil 3D :: Change Current Point Marker For Feature Line?
Aug 29, 2013I want to navigate along my feature line, viewing which point is screen is the current point at the grid.
My feature line shows its points with blue circle & square grips and the current point is showed by a green circle.
The problem is the zoom level, Grips have always the same size but circular green indicator does not.
You can only view this last at a very detailed zoom.
I'd like to have a "big" arrow or something similar.The problem is the great difficulty to identify points....
Civil 3D (2013)
AutoCAD Inventor :: How To Check The Direction Of An Extrude Feature
Mar 4, 2013How to check the direction of an existing extrude feature
kPositiveExtentDirection
kNegativeExtentDirection
kSymmetricExtentDirection
AutoCAD Visual LISP / AutoLISP :: Feature And Polyline Flow Direction (another One)
Nov 18, 2012I have a linetype
*DIVERSION_LARGE,diversion large ---- >> ---- >> ---- >> ----
A,.5,-.2,["<<",standard,S=.15,r=0,U=0.0,X=-0.1,Y=-.05],-.2
when I draw a polyline, or use it as the linetype in a feature line style, the arrows seem to revrse whenever there is a change in direction any significance. Also, the reverse command and reversefeature command have no effect. Rotating a segment does not change the direction. I know I must be missing something.
In the attached, I have a feature line, and a polyline that the arrows change direction when the feature does.
Windows 7 64
Intel Core i7 2.0 GHz 2.0 GHz
8 GB RAM
Nvidia GeForce GTX460M
Civil 3D 2012 SP2.1
AutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface
Dec 11, 2012I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
AutoCAD Civil 3D :: How To Reverse Line Direction
Jul 12, 2012I have made line types with text and need to reverse the direction that the text reads. The text autocorrects based on UCS north. The UCS in the drawing is rotated 90 degrees so line text reads upside down. I type in the reverse command but the text does not change.
View 1 Replies View RelatedAutoCAD Civil 3D :: Reversing Line Direction Of Arc?
Sep 24, 2012I drew in a water line that had an arc in it, the "W" symbol in the line (or arc rather) is upside down. i've tried the reverse command, tried re drawing the arc both ways, tried re loading line types, is there any way to fix this?
View 9 Replies View RelatedAutoCAD Civil 3D :: Changing Line Direction In Alignment?
May 10, 2012i have problem in changing line directions that i'm using in my alignment.like buttom figure.
View 6 Replies View RelatedAutoCAD Civil 3D :: Landing Direction At The End Of Leader Line?
May 14, 2012how to have an option for the landing direction at the end of a leader line, or a way to edit one that has been created.
View 8 Replies View RelatedAutoCAD LT :: Set Line Direction By N E S W By Degrees / Minutes And Seconds
Dec 16, 1999how to set line direction by N,E,S,W by degrees, minutes and seconds.
i.e.. drawing a plot plan laid out by a surveyor.
Must I convert to degrees for polar coordinates or is there a way to directly insert these angles?
AutoCAD Civil 3D :: Flip / Reverse Line Direction In Profile?
Jun 14, 2012I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
AutoCad :: Change Direction Of Balloons
Oct 17, 2013If you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View RelatedAutoCAD Inventor :: How To Change Section Direction
Oct 16, 2013In an assembly, i make a half section view, but i want the other side to be seen.
I want only to change the direction of the view, how can i do that?
AutoCAD VB :: How To Change Vertical Direction Stretch Value
Oct 3, 2013how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....
AutoCAD Civil 3D :: Change Direction Of A Label?
Dec 4, 2013Is there a way to change the direction of a Label? I want all my text facing the same direction and some of my Labels for contours are turned the wrong direction.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
AutoCAD Civil 3D :: How To Change Alignment Direction
May 10, 2012Changing alignment path in my drawing,how can i do that? There is a pic too.
View 1 Replies View RelatedAutoCAD Inventor :: Lines In 3D Sketches Change Direction?
Aug 2, 2012I've created associative 3D sketches to use as trajectories for sweeps. I will often have to use one line extending from the end of another line. I make the two lines colinear. But when the model changes, sometimes one line will change direction and cause an overlapping condition which makes the sweep fail.
Any way to keep it from happening? Ideally, I'd create one line that extended, but you can't constrain a line to a point, only an endpoint to a point. I'm attaching the model.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD Civil 3D :: Reverse Section Direction Without Changing Alignment Direction?
Jan 2, 2014I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedAutoCAD Map 3D :: Feature Line Width
Oct 24, 2013I have liner map feature. I want to apply to lines width like on the picture which I attached. For drawings - polylines I apply differnt "start segment width" and "end segment width" on the "Properties". But how can I do it for liner map features which I connected with "Data connect"?
View 9 Replies View RelatedAutoCAD Map 3D :: Feature Line Styles
Oct 12, 2012Is it possible to edit feature lines join and end styles? I have some compound lines that I would like to look like piping but the option for styling them is greyed out. Just wondering if there is a way to enable these. I have tried adjusted the plot styles but to no effect.
Again this is for feature lines not normal autocad entity lines.
AutoCAD Civil 3D :: Feature Line Projection
Sep 26, 2013Is there any way to project feature lines into a profile when the plan view is xref'd? I have my plan view "existing topo" with all existing features/Figures and a existing surface.
My profile is a separate dwg with plan view xref'd and surface a data shortcut. Of course there are feature lines and Survey Figures in the existing top I want to project into the profile, but can't because it is an xref. Besides copying .