AutoCAD Inventor :: How To Change Section Direction
Oct 16, 2013In an assembly, i make a half section view, but i want the other side to be seen.
I want only to change the direction of the view, how can i do that?
ADVERTISEMENT
AutoCAD Civil 3D :: Reverse Section Direction Without Changing Alignment Direction?
Jan 2, 2014I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedAutoCAD Inventor :: How To Look In Half Section View In Opposite Direction
Aug 12, 2013I made a half section view and it cuts what's above the plane of section in the Z direction, i mean all that's above this plane.
I want it to cut everything that's underneath, below the plane, at my choice, so i can inspect everything what is above the plane of section.
AutoCad 2D :: How To Change Direction In Run Direction Of Baluster Panel
Apr 21, 2011I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedAutoCAD Inventor :: Lines In 3D Sketches Change Direction?
Aug 2, 2012I've created associative 3D sketches to use as trajectories for sweeps. I will often have to use one line extending from the end of another line. I make the two lines colinear. But when the model changes, sometimes one line will change direction and cause an overlapping condition which makes the sweep fail.
Any way to keep it from happening? Ideally, I'd create one line that extended, but you can't constrain a line to a point, only an endpoint to a point. I'm attaching the model.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD Civil 3D :: Cross Section Direction
Nov 14, 2013I'm currently working on a cross section plan and was wondering if there was any way I can change the direction of the cross section view. I'm currently just using 2 sample lines, so just 2 views are needed. My problem is that it seems like one cross section...the view is facing upstream and the other sample line, the cross section view is facing downstream.
Is this normal? How come both cross sections don't face the same direction? So with one x section it's in a East-West direction but the other is a West to East direction.
HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1
AutoCAD Inventor :: How To Change Position Rep In Section View
Jan 31, 2013I have a plan view where I want to show the door openings but I want the section view w/ the doors closed. I can't seem to get inventor to do this.
View 1 Replies View RelatedAutoCAD Inventor :: ILogic Snippet - Change Hatch Pattern In Section Of Specific Material In IDW
Dec 13, 2012I am completely new to ilogic but would like to make a rule in my idw file that change the hatch pattern in a section of a specific material.
Short Version:
I have an aluminum extrusion part. Material is set to Aluminum-6061. In any section view of this part I want the hatch to be ANSI 31 with a rotation of 45 degrees and a scale of .02 How do I do this?
AutoCad :: Change Direction Of Balloons
Oct 17, 2013If you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View RelatedAutoCAD Map 3D :: Change Direction Of A Line Feature?
Aug 26, 2012How can I change direction of a line feature? Have any redy default command to do it?
View 8 Replies View RelatedAutoCAD VB :: How To Change Vertical Direction Stretch Value
Oct 3, 2013how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....
AutoCAD Civil 3D :: Change Direction Of A Label?
Dec 4, 2013Is there a way to change the direction of a Label? I want all my text facing the same direction and some of my Labels for contours are turned the wrong direction.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
AutoCAD Civil 3D :: How To Change Alignment Direction
May 10, 2012Changing alignment path in my drawing,how can i do that? There is a pic too.
View 1 Replies View RelatedAutoCad :: Change Direction Of Leader Landing Line?
Jan 7, 2012I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
AutoCAD Inventor :: Calculate Section Modulus On Certain Cross Section Of Solid Part?
Dec 9, 2013I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedAutoCAD Inventor :: Incorrect Radial Section View - Section Participation None
Sep 24, 2012The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
AutoCad :: Text Suddenly Changes Direction And Reads In Opposite Direction When Line Bends
May 17, 2013I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
AutoCAD Inventor :: Section View Not Parallel With Section Line?
Nov 19, 2011why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedAutoCAD Inventor :: Section An Assembly In Breakout But Not Section
Sep 24, 2013In the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD Inventor :: Top Section To Blend Into Bottom Section?
Jan 11, 2013How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedPhotoshop :: How Can I Change Direction Of An Image
Dec 1, 2006If I have a layer on top of another layer or say I have a custom tool shape on a page, how do I select it to change the direction is it facing. I don't want to use the roate canvas selection. I know in the past I was able to do something like alt and click the shape or image to change its direction.
View 3 Replies View RelatedIllustrator :: How To Change Text Direction To RTL In AI6
Jan 1, 2013The characters of a word in Hebrew need to reverse their text direction despite the font being Adobe Hebrew which you would expect to be in the correct direction. However this text was copied in from Word.
I can't locate the menu option, e.g. Window>Type>Paragraph fails to show any RTL option. That the text is selected seems indicated by the bar at the top of the screen showing point size etc.
CorelDRAW X5 :: Pen Tool - Change Node Direction
Feb 17, 2012what gives here with Corel's so-call Pen Tool. First there's almost NOTHING out there in terms of tutorials etc. Plenty about the Bezier tool but truly hardly anything about the Pen Tool
How on earth do you change the node's direction? This is SO frustrating! I just wanna control this *** but I can't. In Adobe PS it's simple, just hit ALT and you're back to 0 angle. In Corel I read somewhere that you double click the last node......yeah that ends it alright but when you go back to continue at a different angle it goes back to the same angle all over again so it's literally useless.
Photoshop :: Change Direction Of Text On Path
Mar 8, 2009how to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies View RelatedIllustrator :: Change Direction Of Perspective Text?
Feb 7, 2013I have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedIllustrator :: Change Direction Of Gradient Stroke?
Jun 20, 2013Why is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
View 2 Replies View RelatedRevit :: Change Direction Of Model Hatch That Is Seen In 3D View?
Dec 22, 2011How do you change the direction of a model hatch that is seen in 3D view?
I want to change the pattern of wood planking that goes horizontally to go vertically (in plan view).
Illustrator :: Keeping Angle Of Direction Line While Dragging Direction Point?
Mar 19, 2014I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
AutoCAD Inventor :: Direction Of Material
Apr 24, 2012How to make a type of material go in one direction or by another degree . Ex: if you click on a wood type material, it goes up or down and right or left depending which side of that object is. On the picture below, it goes up and down, side to side no all sides go in one direction. I need to know how to mange the direction of the way of where the material go.
View 7 Replies View RelatedAutoCAD Inventor :: How To Set Wire Direction At Pin
Oct 5, 2011is it possible to define a 'natural direction' at a pin, in which a wire should start when connected to that pin? This would seem to be natural for me.
As the attached picture shows, my wire is connected at this pin in a weird direction (because I need to route it through the indicated segment).
What is the best strategy to do it correctly?
Another question: I increased the diameter of the segment, hoping that it means that the wires are constrained within the segment, but are free to move withini this. But they all seem to be constrained to the centerline. What I want is that all my wires pass within this 'tube' of 30mm diameter.
AutoCAD Inventor :: Changes Direction Of Dimension If Crosses Zero Value
Oct 23, 2011I have an ipart. One dimension is either some value or null.It is a variable in the Table. For instance I have 6mm down from Center point in part A. Than I switched to zero for Part B and if I go back to 6mm for Part A the dimension is now above the Center Point. How to make the dimension stay as initially assigned?
View 1 Replies View Related