AutoCAD Inventor :: Incorrect Radial Section View - Section Participation None
Sep 24, 2012The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
ADVERTISEMENT
AutoCAD Inventor :: Section Participation Of Component Accessible Via API?
Sep 13, 2013Is Section Participation of a component accessible via the API?
It can be controlled locally with respect to a view in a drawing, or via document settings for the file itself ( so it would always be excluded). I'm hoping it's available in either of those two areas of the API.
AutoCAD Inventor :: Turning Off Part And Subassembly Section Participation In Nested Views
Dec 15, 2011I can't control the section participation of individual parts or subasy in a IDW view. I want to have some parts & subs sectioned in the view & others not sectioned. They seem to follow whatever the IAM is set for. Note that I do not want to control the section participation in each Model from Documentation/Model/Particiapation becasue it will screw up other drawings referencing the models. Besides, I tried it & it stil wouldn't work.
The complicated part is that the view can be a cropped or detail view of a section view that is the child of the parent view-(I had to do it this way to get the view I needed).
is it even possible to individually control the sectioning in parts of nested views?
The RMB controls are available to do so but nothing happens, even if I close & open the file again.
Sometimes the RMB menu/Section Participation shows little filled in squares next to Sectioned & None. If I click on either, it becomes a check mark.
AutoCAD Inventor :: Section View Not Parallel With Section Line?
Nov 19, 2011why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedAutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline
Oct 12, 2012I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedAutoCAD Architecture :: How To Cut A Section And Create A Section View
Nov 3, 2012So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View RelatedAutoCAD Civil 3D :: Unidentified Section In Section View
Nov 8, 2012I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
AutoCAD Civil 3D :: Section View Properties - Section Tab?
Oct 16, 2012My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedAutoCAD Inventor :: Calculate Section Modulus On Certain Cross Section Of Solid Part?
Dec 9, 2013I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedAutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another
May 6, 2013Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Showing Section View In Base View
Dec 13, 2012how to show section view in base view with out projection the component.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Section View As Isometric View
Oct 29, 2013I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
AutoCAD Inventor :: Way To Save A Section View In Assembly As View Rep
Mar 13, 2013Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View RelatedAutoCAD Inventor :: Section An Assembly In Breakout But Not Section
Sep 24, 2013In the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD Inventor :: Top Section To Blend Into Bottom Section?
Jan 11, 2013How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedAutoCAD Inventor :: Cut Section / Different View Style In Same View?
Nov 12, 2013It's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
AutoCAD Inventor :: Section View As Master View
Aug 26, 2013I place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
AutoCAD Inventor :: Section View From Sketch
Oct 6, 2011I need an urgent solution to my issue.I have created section view from a sketch (a line constrained to the projection of a work plane) from my derived part to my drawing using the "Get model sketches ". When i update the iassembly and update the the view using model state the view tries to update but throws an error see attached document.When i delete the section line and create a section line manually ie. by creating a normal sketch in the drawing the same model gets updated without any error.
View 6 Replies View RelatedAutoCAD Inventor :: IDW Section View Hatching?
Jun 11, 2013When creating a section view in 2014, the new view now comes bordered by a large box that is hatched. I can hide the borders (4 separate lines) and the hatch but cannot change the size of the view border. I don't remember this from 2011.
View 3 Replies View RelatedAutoCAD Inventor :: Section View Of A 3d Model?
Apr 28, 2011I was wondering in inventor 2010 how to create a 3d model section view of a 3d model assembly or if its even possible.
View 5 Replies View RelatedAutoCAD Inventor :: Incomplete Section View
Feb 14, 2013I am trying to produce a section view of a vessel. Inventor makes the section just fine except it is incomplete. See images below:
In the past when I have encountered this issue I would simply locate the part in the browser, Right click on it + Section Participation + section. That usually solves the issue. This time it is not working.
AutoCAD Inventor :: Section View In IDW File?
Sep 17, 2012While sectioning an assembly in .idw file, I dont want to see any thing that is behind the section line.
I am not talking about hidden lines. (I can switch of the hidden lines).
Some times, there are holes or opening while sectioning. Thru those openings, some of the parts that are behind the section planes are visible. I dont want to see anything.
How to do it? I am using INV2013.
Options like,
Option 1: Dont view anything more then 0.00mm or 1 mm behind. (Like section depth or view depth which can be entered)
Option 2: Switch off that are not sectioned.
AutoCAD Inventor :: Breakout On Section View
Sep 17, 2007If you have a section view, shafts are typically turned off for segtioning, however there is sometimes detail such as keyways or oil holes that are required to be shown which is where a breakout, view is req'd, however it appears the only way to do this is by creating a detail view first, leading to the possibility of a lot of clutter on the drawing from detail views, as when a breakout view is created on the section view, the shaft will not participate in the breakout.
View 3 Replies View RelatedAutoCAD Inventor :: Section View In New Sheet
Jun 23, 2013I am generating a drawing file in inventor.its having lot of sections and projected views. Its not able to accommodate all the views in one sheet. So my plan is to move the section views to second sheet or third sheet but section cutting line has to be in first sheet plan view.
I have seen drawing generated in inventor in same way but don't know how to do it.......
Inventor Professional Suite 2010
Windows 7
AutoCAD Inventor :: Section View In IDW Failing?
Dec 7, 2011In an idw of an assembly, I have made a section view and gave it a distance of 10in expecting to only view my assembly 10 in from the section line.
However, all I get was a slice 10 in deep from the top, my section view wasn't looking at the full height of my assembly.
I started a new print, inserted the same model and the same thing happened. This is only occuring with this model, other models are working just fine.
IV2012 sp1 Win7 x64
AutoCAD Inventor :: View Arrow Instead Of Section Lines
May 30, 2012 inventor 2012. for instance for a aux. view if it is not in-line with the parent view it puts a section line. is there a way to have a single view arrow?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
AutoCAD Inventor :: Section View With Nuts And Screws
Feb 15, 2012I created an assembly with screws and nuts which are not from content center. When creating a section view on Drawing, screws and nuts are also sectioned, but I don't want to.
Is it possible to see entire screws and nuts in a section view?
AutoCAD Inventor :: Ray Tracing While Using Half Section View
Dec 9, 2013Ray tracing disables when I use the half section view, when I turn it on again it disables the section view. Is there any way I can see a cross section of my assembly in realistic mode with ray tracing?
View 3 Replies View RelatedAutoCAD Inventor :: Parts Excluded In Section View
Sep 16, 2013I often do section views in my 3D model (not drawing) to visually check interference, etc. I noticed today that some parts are excluded from this and do not get sectioned. I'm sure it's an easy fix but a search turned up nothing. How do I include/exclude specific parts from this view?
View 2 Replies View RelatedAutoCAD Inventor :: How To Cut Those Three Portions Instead Of Full-section View
Jul 14, 2012how to cut those three portions instead of my full-section view.I have a dimensioning problem with this second radius which inventor refuses to create even it detects that it's a fillet feature. also how do I resize the dimension text.
View 3 Replies View Related