I have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 RepliesThe characters of a word in Hebrew need to reverse their text direction despite the font being Adobe Hebrew which you would expect to be in the correct direction. However this text was copied in from Word.
I can't locate the menu option, e.g. Window>Type>Paragraph fails to show any RTL option. That the text is selected seems indicated by the bar at the top of the screen showing point size etc.
how to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies View RelatedWhen I change the perspective on text it becomes blurry. Why?
View 1 Replies View Relatedi made this vector on 3p perspective using an image background that was on 3d, how can i bring this 3p perspective vector to 1p perspective in a way that the vector will look 2d rather than 3d that it looks like now, i have tried to copy from on plane to another but it still looks the same, it doesnt transform.
View 3 Replies View RelatedI have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedWhy is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
View 2 Replies View RelatedI have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
I am in some trouble in the one-point perspective in Illustrator. I am making a scene where I need the vanishing point to be on the left and the vanishing plane on the right, in one-point perspective. I just moved the vanishing point & plane where I want it to be, but Illustrator still thinks the plane is on the left, so when ever I type something and move it onto the vanishing plane, it becomes mirrored. How do I go about this? Can I change the settings for the planes or do I have to reflect the text each and every time?
View 1 Replies View RelatedIn Photoshop, you can transform a layer by pressing ctrl while you click in the border of the object. I would like to do it on Illustrator CS6, is there anything like this tool available?
View 1 Replies View RelatedWhat's the best way to curve a text to perspective like this:
The current example was manually created. Somehow doesn't seem right.
I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
I am attempting to wrap some 2D text around an object, which has perspective. See example below:
The above is my attempt at wrapping the word "NEIGHBORHOOD" around the object. What I did was Object > Envelope Distort > Make with Mesh... and just approximated how it should look by using a combination of guides. There has got to be a better, more precise way of doing this in illustrator.
Looking at the AI file available here (in the Public folder of my Dropbox), why the text takes a gradient when I place it on a perspective grid? I'm not able to see anything in the Appearance panel that gives me a hint. It may be obvious to someone without even needing to open the file . . . see pictures attached.
View 2 Replies View RelatedI intend to create metallic text with isometric perspective. What I need is a tutorial that tells me how to achieve this. In fact, I did find a tutorial which is very near to want I am looking for, but the description is not clear and I am going nowhere with it.
View 11 Replies View RelatedIf I have a layer on top of another layer or say I have a custom tool shape on a page, how do I select it to change the direction is it facing. I don't want to use the roate canvas selection. I know in the past I was able to do something like alt and click the shape or image to change its direction.
View 3 Replies View RelatedIf you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View RelatedI am trying to change the perspective of an image in Photoshop CS5 which I would like to put into this I mac image, see my attachment.
View 7 Replies View RelatedI want to crop with a perspective change in PSCS 4 Extended. Whenever I add a crop outline, the Perspective checkbox is disabled.
I thought that the way to change perspective was to make the crop selection and then check the Perspective checkbox and then adjust the proportions but something is strange.
If I'm working in any orthographical view (Front, Top, etc.) and I'm switching to perspective, field of view is not 45 degree and it randomly changes.
Is there any "cure" for this?
I have a photo of a coffee table that's on an angle. I want to rotate this table so it looks like you're standing in front of it and seeing the front. The problem is the Rotate, Perspective, and Map Object tools don't seem to be able to do it. I also tried a plug-in called EZ Perspective, but that also doesn't seem to work.
At this point, I'm guessing you can't change the perspective of an image (up, down, left, right) because it's flat and not 3D, and no program knows what the other sides would look like. Is that correct, or can I do what I want and just don't know how, yet?
Here's a photo of the image:
what gives here with Corel's so-call Pen Tool. First there's almost NOTHING out there in terms of tutorials etc. Plenty about the Bezier tool but truly hardly anything about the Pen Tool
How on earth do you change the node's direction? This is SO frustrating! I just wanna control this *** but I can't. In Adobe PS it's simple, just hit ALT and you're back to 0 angle. In Corel I read somewhere that you double click the last node......yeah that ends it alright but when you go back to continue at a different angle it goes back to the same angle all over again so it's literally useless.
How can I change direction of a line feature? Have any redy default command to do it?
View 8 Replies View RelatedIn an assembly, i make a half section view, but i want the other side to be seen.
I want only to change the direction of the view, how can i do that?
how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....
Is there a way to change the direction of a Label? I want all my text facing the same direction and some of my Labels for contours are turned the wrong direction.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Changing alignment path in my drawing,how can i do that? There is a pic too.
View 1 Replies View RelatedI'm working on a picture of a coffee table in CS2 Photoshop. The table is facing to the left and I want to change it's perspective to face straight forward. How do I make this change?
View 1 Replies View Relatedhow to change the perspective of wording on PSPX2
I can easily do it on an image, as it comes up in the tool options toolbar, but the wording toolbar is the alignment one.
How do you change the direction of a model hatch that is seen in 3D view?
I want to change the pattern of wood planking that goes horizontally to go vertically (in plan view).
I've created associative 3D sketches to use as trajectories for sweeps. I will often have to use one line extending from the end of another line. I make the two lines colinear. But when the model changes, sometimes one line will change direction and cause an overlapping condition which makes the sweep fail.
Any way to keep it from happening? Ideally, I'd create one line that extended, but you can't constrain a line to a point, only an endpoint to a point. I'm attaching the model.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7