I want to crop with a perspective change in PSCS 4 Extended. Whenever I add a crop outline, the Perspective checkbox is disabled.
I thought that the way to change perspective was to make the crop selection and then check the Perspective checkbox and then adjust the proportions but something is strange.
In the old days, one could just use the crop tool and, while drawing crop lines, check the perspective box if you found that you needed to change the perspective. With CS6 if you start with the crop tool, and find you want to change the perspective, you have to change tools to the new perspective crop tool. In the process, you have to tell the newly opened dialog box that you don't want to crop, to get to the perspective tool, which now has reset to its defaults. You've lost your cropping and you have to start over.
View 9 Replies View RelatedHere are two crops of a banal subject, our dryer and its circular control knob. Both done the same way, but look at the difference. First result, with size 1876x1419, which is reduced for this post, is obviously a distortion:
I wasn't surprised or upset to see this distortion, since I'd seen it many times before. It's easy enough to remedy: just Perspective Crop again. This time the image was 1871x1000, which is much better:
Photoshop, we have a problem! Why can't this be corrected?
I use rectangle marquee to do this. Only thing, --unlike the crop tool--if has no handles if you don't drag perfectly on the first crack.
Is there a way (crop tool?) -- to keep no uprez or downrez, but just crop and get handles?
I could not click on the Perspective Box when I used the Crop tool. What do I need to do?
View 2 Replies View RelatedI have a client who is an artist and she needs some image editing software but does not have the funds for Photoshop. She can purchase elements 10 quite cheaply but the most handy tool for her will be the perspective function in crop but I am not sure whether it is a feature of elements 10.
View 2 Replies View RelatedWhat happened to PERSPECTIVE when I use the CROP tool?
View 1 Replies View RelatedWhy is my Crop Tool's perspective option greyed out?
View 2 Replies View RelatedIs there a perspective setting for the crop tool in OS Elements 11?
View 5 Replies View RelatedWhat happens to the image pixels within the crop when you correct perspective with the crop tool or free transform?
View 25 Replies View RelatedI am trying to change the perspective of an image in Photoshop CS5 which I would like to put into this I mac image, see my attachment.
View 7 Replies View RelatedI'm working on a picture of a coffee table in CS2 Photoshop. The table is facing to the left and I want to change it's perspective to face straight forward. How do I make this change?
View 1 Replies View RelatedThe picture below is a (sadly), .jpeg and I would like to be able to change its dimensions from 800X600 to 958x198However, when I use Ctrl + T to change the size (of course), the sun (most of all) becomes an ellipse.Is there a way that I can change the dimensions of this image without losing the perspective?
Like maybe a way to extend the clouds? I've read about the Clone tool but it leaves seams and aside from that it looks like the image belongs on Santas island of misfit images . Any way, maybe what I am asking is not possible at all but I thought I would ask nonetheless. I've tried keywords up the wahzoo in the FAQ's & forum but have come up empty handed.
In Photoshop, you can transform a layer by pressing ctrl while you click in the border of the object. I would like to do it on Illustrator CS6, is there anything like this tool available?
View 1 Replies View RelatedIf I'm working in any orthographical view (Front, Top, etc.) and I'm switching to perspective, field of view is not 45 degree and it randomly changes.
Is there any "cure" for this?
I have a photo of a coffee table that's on an angle. I want to rotate this table so it looks like you're standing in front of it and seeing the front. The problem is the Rotate, Perspective, and Map Object tools don't seem to be able to do it. I also tried a plug-in called EZ Perspective, but that also doesn't seem to work.
At this point, I'm guessing you can't change the perspective of an image (up, down, left, right) because it's flat and not 3D, and no program knows what the other sides would look like. Is that correct, or can I do what I want and just don't know how, yet?
Here's a photo of the image:
i made this vector on 3p perspective using an image background that was on 3d, how can i bring this 3p perspective vector to 1p perspective in a way that the vector will look 2d rather than 3d that it looks like now, i have tried to copy from on plane to another but it still looks the same, it doesnt transform.
View 3 Replies View Relatedhow to change the perspective of wording on PSPX2
I can easily do it on an image, as it comes up in the tool options toolbar, but the wording toolbar is the alignment one.
When I change the perspective on text it becomes blurry. Why?
View 1 Replies View RelatedI have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedI am in some trouble in the one-point perspective in Illustrator. I am making a scene where I need the vanishing point to be on the left and the vanishing plane on the right, in one-point perspective. I just moved the vanishing point & plane where I want it to be, but Illustrator still thinks the plane is on the left, so when ever I type something and move it onto the vanishing plane, it becomes mirrored. How do I go about this? Can I change the settings for the planes or do I have to reflect the text each and every time?
View 1 Replies View RelatedI set a viewport to a perspective mode. I do this by starting 3DOrbit then right clicking and choosing perspective. Save, close, open and all perspecitve views are set to parallel projection.
View 9 Replies View RelatedFor some reason regardless of what I save or the fact that I've saved the template files, everytime I open a new file it automatically adds shadows and applies perspective view. This is extremely annoying. How do I alter the default settings to be ortho with no shadows?
View 7 Replies View RelatedI am working on 3d model of interior and I have two problems. I am trying to made similar model as it is on the first image.
After setting all render properties and turning on sky and illuminations my view on object switch from isometric to perspective view.
Is there any way to change it to isometric view so the point of view do not change position at the time of changing, because I find out the way to return it to isometric but then the point of view that was placed inside of room is moved outside and I can't render object that was inside.
Also I can't set white background as it is on the first image. Second image is my attempt that is made inside of the room.
1.2.jpgexample 2.jpeg
I am using Photoshop Extended CS6. A new problem has started to occur recently. I can select a tool, but I can't change the tool type. For example,I can select the Lasso Tool and when I right-click the tool fly-out appears, but I cannot select a tool from the fly-out to change the tool type. The editing tools, at least the ones I can select, still work except for the selection and crop tools. For the crop tool, the crop lines appear at the edge of the image but they cannot be moved. For the selection tools, nothing is selected. I can still use menu commands such as Canvas Size.
This happens when I open a file or start a new file. I have Windows 7, 4G memory and nothing else running. I have tried 32-bt and 64-bit versions.This has happened intermittently for a month or two. In the past, freeing up space on a hard drive seemed to work. But now I have 50G free on one drive and 30G free on another so I don't see how that could be the problem. Rebooting allows me to use the crop tool once, but then the problem reoccurs.
CS5 v12.1
MAC mini
OS 10.7.4
The last time I used PS was about two weeks (it's summer) and I had the marquee size set to 2.18x2.18 inches. I just changed it to 2.15x4.35 inches. When I click on the image, which is about 2.25x4.45 inches, it selects an area 2.18x2.18 inches. The dimensions in the boxes are 2.15 and 4.35 inches. Feather is 0 pixels.
I have a 5" x 7" (landscape style) image that I want to crop in Elements 9. I'm using the Guided mode on the Edit tab of the program. When I use the pulldown menu and I see the 5 x 7 crop box size that I want to use, I click it. But the crop window that appears, is 7 x 5 (portrait mode) rather than 5 x 7 landscape mode. I can work around this by changing my crop box size selection on the pulldown menu to No Restriction, but I'm then just guessing that I'll get precisely the 5 x 7 ratio that I want. How can I change the crop box from portrait style to landscape style so that I can crop my image 5 x 7 rather than 7 x 5?
View 5 Replies View RelatedI have a photo that I need to change /cut/crop/delete? the bottom right corner so that it curved - other corners can stay at right angle
I am using web designer 6 - can send .xar file if necessary - but would prefer to know what tools to use to get this done the photo sits on 2 rectangles with rounded corners (back- purple, foreground is white) so the photo needs to have the same curve as the rectangles.
I would like to change the standard length of Illustrator's crop marks. (I need that because I'm exporting colorseparations for silkscreaning. An as crop marks are printed *** well I would like to keep them tiny)
View 11 Replies View RelatedIn the past, I have been changing my default image size to a 2:3 format by selecting it from the drop down list while in the Develop module or by pressing R. After adjusting the image, it used to display 2:3 under the lock, but now it is going back to AS SHOT.
I am using a Windows 7 machine with LR 4.2.
I like knowing I have a custom crop ratio, but have no idea if it is being applied by looking at images in LR.
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective