I'm working on a picture of a coffee table in CS2 Photoshop. The table is facing to the left and I want to change it's perspective to face straight forward. How do I make this change?
View 1 RepliesI am trying to change the perspective of an image in Photoshop CS5 which I would like to put into this I mac image, see my attachment.
View 7 Replies View RelatedI want to crop with a perspective change in PSCS 4 Extended. Whenever I add a crop outline, the Perspective checkbox is disabled.
I thought that the way to change perspective was to make the crop selection and then check the Perspective checkbox and then adjust the proportions but something is strange.
The picture below is a (sadly), .jpeg and I would like to be able to change its dimensions from 800X600 to 958x198However, when I use Ctrl + T to change the size (of course), the sun (most of all) becomes an ellipse.Is there a way that I can change the dimensions of this image without losing the perspective?
Like maybe a way to extend the clouds? I've read about the Clone tool but it leaves seams and aside from that it looks like the image belongs on Santas island of misfit images . Any way, maybe what I am asking is not possible at all but I thought I would ask nonetheless. I've tried keywords up the wahzoo in the FAQ's & forum but have come up empty handed.
In Photoshop, you can transform a layer by pressing ctrl while you click in the border of the object. I would like to do it on Illustrator CS6, is there anything like this tool available?
View 1 Replies View RelatedIf I'm working in any orthographical view (Front, Top, etc.) and I'm switching to perspective, field of view is not 45 degree and it randomly changes.
Is there any "cure" for this?
I have a photo of a coffee table that's on an angle. I want to rotate this table so it looks like you're standing in front of it and seeing the front. The problem is the Rotate, Perspective, and Map Object tools don't seem to be able to do it. I also tried a plug-in called EZ Perspective, but that also doesn't seem to work.
At this point, I'm guessing you can't change the perspective of an image (up, down, left, right) because it's flat and not 3D, and no program knows what the other sides would look like. Is that correct, or can I do what I want and just don't know how, yet?
Here's a photo of the image:
i made this vector on 3p perspective using an image background that was on 3d, how can i bring this 3p perspective vector to 1p perspective in a way that the vector will look 2d rather than 3d that it looks like now, i have tried to copy from on plane to another but it still looks the same, it doesnt transform.
View 3 Replies View Relatedhow to change the perspective of wording on PSPX2
I can easily do it on an image, as it comes up in the tool options toolbar, but the wording toolbar is the alignment one.
When I change the perspective on text it becomes blurry. Why?
View 1 Replies View RelatedI have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedI am in some trouble in the one-point perspective in Illustrator. I am making a scene where I need the vanishing point to be on the left and the vanishing plane on the right, in one-point perspective. I just moved the vanishing point & plane where I want it to be, but Illustrator still thinks the plane is on the left, so when ever I type something and move it onto the vanishing plane, it becomes mirrored. How do I go about this? Can I change the settings for the planes or do I have to reflect the text each and every time?
View 1 Replies View RelatedI set a viewport to a perspective mode. I do this by starting 3DOrbit then right clicking and choosing perspective. Save, close, open and all perspecitve views are set to parallel projection.
View 9 Replies View RelatedFor some reason regardless of what I save or the fact that I've saved the template files, everytime I open a new file it automatically adds shadows and applies perspective view. This is extremely annoying. How do I alter the default settings to be ortho with no shadows?
View 7 Replies View RelatedI am working on 3d model of interior and I have two problems. I am trying to made similar model as it is on the first image.
After setting all render properties and turning on sky and illuminations my view on object switch from isometric to perspective view.
Is there any way to change it to isometric view so the point of view do not change position at the time of changing, because I find out the way to return it to isometric but then the point of view that was placed inside of room is moved outside and I can't render object that was inside.
Also I can't set white background as it is on the first image. Second image is my attempt that is made inside of the room.
1.2.jpgexample 2.jpeg
I've got a question about canvas rotation. Everytime I I try to totate the canvas arbitrarily the qualtiy goes way down, but if I rotate it 90 or 180 degrees it doesn't change. Most of my images need to be rotated 45 degrees. Is there any way to keep the image quality from going down or a way to fix it?
View 9 Replies View RelatedI need to crop arbitrary shapes (e.g. triangle, star, hexagon, etc.) out of a series of pictures. The number of pictures is relatively small (less than twenty), and I will have to manually select the area to be cropped. But, I don't see how I can crop to, say, a hexagon repeatedly. What I would like is a cookie cutter so I can simply size the shape and then stamp it out.
View 1 Replies View RelatedRunning Vista-64, OpenGL features enabled (and working).
Nvidia 260gtx card with newest drivers (178.24)
Image is rendered sharp at the predefined zoom levels (like 25%/33%/50%/66%).
Then if I zoom to eg 55% the image gets blurry.
i am looking for a command that will let me take a scan of something and say "make vertical" and have PS prompt me for two pickpoints with the second pickpoint being directly above (i.e. vertical) the other. alternatively i would like to have a way to "make horizontal" and pick two points that i want oriented in a horizontal line to each other.
right now the way i do this is to rotate clockwise or counterclockwise by 90 degrees, then rotate by some arbitrary amount like 3 degrees, and then to do a series of 0.25 degree rotations - as i check by running a rectangular border top to bottom (or right to left) against something in the image until it is almost correctly oriented.
When I scan my photos they are not always straight. I use Image-RotateCanvas-arbitrary command to change the percentage of rotation to straighten image.
I automated the process in "actions" menu to rotate canvas 0.5%CW and 0.5%CCW.
I decided to play a little bit with newly made "action" hotkeys to get used to them.
Now the problem
When I rotated the image 5 times CCW and 5 time CW I noticed that it became significantly distorted, blurred. I tried manually do the same (without automation) same result. With every additional step of rotating, image becomes more distorted, so it is not faulty automation...
Question:
Is it normal?
P.S. I scan images at 24 bit color, 150 resolution.
Basically, I want to be able to create a glass effect on a square icon tile. I want the glass to be translucent so that the image behind the square icon tile is blurry (hence the translucency). I know how to create effect if I want it over some user-defined background layer, but what I am trying to do is a bit different. I need to import a PNG file into a theme program, and it uses this glass tile. I want the glass tile to have the translucent effect, but the problem is, I can only get the effect to work if I create a layer over a user-defined background layer. What I want is to have the translucent effect over whichever background is used in my theme program. I am not sure if this is possible to do with a PNG file, or even possible at all. If anyone could shed some knowledge on this I would greatly appreciate it.
View 4 Replies View RelatedI have some 300 images, all handheld shots done in an on-location studio set. They all need varying amounts of image rotation since they're handheld. There's a beaded curtain in the background, so manually I use the ruler tool, draw a line along a strand of beads, and then image/rotate/arbitrary.
I need to create an action that will (1) do the arbitrary rotation and then (2) save and close the file.
However, when I record this, the value of the rotation of the sample file I'm working is what gets recorded (not surprising). In other words, if image A needs 0.28 degrees of rotation, that's not what I want for image B which might need -0.15 degrees instead. The action recorded 0.28.
Is there a way to create an action that will simply rotate according to the ruler once I've drawn it?
Is it possible with X5 to rotate a video arbitrary number like 8%? I know the video can be rotated 90% but unsure about just a minor rotation. If not possible in x5 maybe in x6?
View 1 Replies View RelatedIs there a quick way of achieving the following:
You have an object rotated at an arbitrary angle
You want to rotate it back to a 90 degree line by snapping it.
I can do this by measuring the arbitrary angle and then rotating it manually based on my measurement.
I have a line (not a polyline) that i need to extend by dragging one end to an arbitrary location but must conserve the orientation of the line. I then have to drag the other end point in the opposite location to a location that I pick (ie, not a cad feature, but by human eye)
POLAR works good in that i know the angle, but the line is allowed to be drawn wherever, and i need to focus on precisely where i extend the line too and not that the angle is changing.
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
I WANT TO CHANGE THE BACKGROUND OF A PICTURE
View 1 Replies View RelatedI'm an exotic automobile photographer in the Houston area, and I edit tons of photos of mine a day. New challenge, me trying to change a background. I'm having trouble doing so.
How to change the background behind the green Ferrari in the picture? I was thinking in the middle of a rural road or something similar. Making it look very realistic as if it was there.
I've been browsing around for a while and there is a lot of great info.
Here's my question:
How do I change the colors in the picture, but still make it look real?
What i'm looking for is the equivalent of using "Path along text" (in this case for a circular path) but using already rendered bitmap data instead of text and a font. Why i need to do this is: 1. i don't have a font for the logo text i created (i don't think one exists) and 2. i would like to add some effects before "wrapping" the text around the circle.
I'm having so-so success with "distort -> polar coordinates" .
In the Print module (LR4.3) under Layout, the unit intervals for margins and cell size seem to be arbitrary. For example, I can get margins of 0.93 or 1.03 inches left and right and 0.94 or 1.06 inches top and bottom, but not 1.00 inch all around. Similarly I can get a cell size of 4.02 x 6.04 inches or 3.93 x 5.95 inches, but not 4.00 x 6.00 inches. why Lightroom offers such seemingly arbtrary measurement intervals or what controls the intervals?
View 5 Replies View Related