If I have a layer on top of another layer or say I have a custom tool shape on a page, how do I select it to change the direction is it facing. I don't want to use the roate canvas selection. I know in the past I was able to do something like alt and click the shape or image to change its direction.
View 3 RepliesI have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View Relatedhow to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies View RelatedIf you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View RelatedThe characters of a word in Hebrew need to reverse their text direction despite the font being Adobe Hebrew which you would expect to be in the correct direction. However this text was copied in from Word.
I can't locate the menu option, e.g. Window>Type>Paragraph fails to show any RTL option. That the text is selected seems indicated by the bar at the top of the screen showing point size etc.
what gives here with Corel's so-call Pen Tool. First there's almost NOTHING out there in terms of tutorials etc. Plenty about the Bezier tool but truly hardly anything about the Pen Tool
How on earth do you change the node's direction? This is SO frustrating! I just wanna control this *** but I can't. In Adobe PS it's simple, just hit ALT and you're back to 0 angle. In Corel I read somewhere that you double click the last node......yeah that ends it alright but when you go back to continue at a different angle it goes back to the same angle all over again so it's literally useless.
How can I change direction of a line feature? Have any redy default command to do it?
View 8 Replies View RelatedIn an assembly, i make a half section view, but i want the other side to be seen.
I want only to change the direction of the view, how can i do that?
how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....
Is there a way to change the direction of a Label? I want all my text facing the same direction and some of my Labels for contours are turned the wrong direction.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Changing alignment path in my drawing,how can i do that? There is a pic too.
View 1 Replies View RelatedI have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedWhy is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
View 2 Replies View RelatedHow do you change the direction of a model hatch that is seen in 3D view?
I want to change the pattern of wood planking that goes horizontally to go vertically (in plan view).
I've created associative 3D sketches to use as trajectories for sweeps. I will often have to use one line extending from the end of another line. I make the two lines colinear. But when the model changes, sometimes one line will change direction and cause an overlapping condition which makes the sweep fail.
Any way to keep it from happening? Ideally, I'd create one line that extended, but you can't constrain a line to a point, only an endpoint to a point. I'm attaching the model.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I want to force the Multileader landing to go left when the program wants to automatically form it to the right. How can you choose/change the direction of the landing line and side on which the text will be placed.
AutoCAD 2011
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedI have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI've designed an image that I want to use as a arcade game control panel and I want to make it seem 3d, as the image is currently a rectangle.
I want to pull the image in at the top corners whilst retaining its dimensions so that it looks like your'e looking down on the control panel (hope Im explaining this ok?)
How do I reverse Photoshop Trap direction (or control it) (CMYK image - trap black to rest of image - swell it)
View 1 Replies View RelatedI'm creating a sign. I started from a font, then converted the text to a shape to provide the sign maker with vector art.
Some of the lettering is metal-like mounted on a dark acrylic backing that 's supposed to create a 3D stroke-like effect. In the original design I actually had a stroke on the lettering to mock up the effect. But now, in order to seperately cut the letters and the backing, the sign maker needs vector art for both the metal-like lettering AND the backing pieces, which extend another 1/8" beyond the metal-like in every direction.
I duplicated that shape to create the background. The background needs to be 1/8" bigger in EVERY direction, so that when the metal-like letter is mounted on top of it, the brown background will create a stroke effect:
I need to grow every border of this brown B by the same amount--the exterior as well as the 2 interior edges--so that when the yellow B (above) is placed on top of it, the brown shows a 1/8 "stroke" around the yellow B. I tried doing a straight transform, but that doesn't achieve the desired result. Another poster in the forum (answering a similar question) suggested using Modify > Expand, but I can't get that to work (the command is greyed out for some reason).
Photoshop and Flash consider the clockwise direction a positive rotation. Illustrator and InDesign consider it a negative rotation. Will this ever be consistent among Adobe applications?
[URL]...
I'm wanting to make the type for a logo i'm designing follow a curve. I want a circle of text around the main part of the logo.
View 2 Replies View RelatedI have some photos that I would like to change the color of, so that I can have the same image in multiple colors. How do I do this using Photoshop CS4?
View 2 Replies View RelatedI want to print an image using an online service and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
View 3 Replies View Relatedis there any way to change image placement when dragging it into PS? Now all the images are placing automatically directly in my document (in current tab). I want i to open as a new tab.
I'm using PS 12.1 in Win 7.
I sent the attached PDF -URL....to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
I am trying to change the perspective of an image in Photoshop CS5 which I would like to put into this I mac image, see my attachment.
View 7 Replies View Related