I sent the attached PDF -URL....to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
I've got a question that I'm sure has a very simple solution but I can't find it even though I've searched all over the place. Is there a way to change the default zoom level when Photoshop opens an image? I'm using CS2 on OSX (though the screenshots I've included to illustrate what I'm asking are from Win XP).
I am trying to adjust the noise level with the level tool but its not working. I move the arrows every which way see that it changes. I get it to were i want it them press ok and it only changes a little bit.
It become what it was in the preview. The level tool works when I add it as a new adjustment layer but I don't want like that I want to be able to copy the new level of noise I just made and can't if I add new adjustment. what should I do to fix this? O and this is the trial version and It wasn't working earlier with lots of other tool but i uninstalled it and now they are working except the level tool how I want it to.
Somehow when I imported my photos I made several folders subfolders of a parent folder when they should have been at the same level. How can I go about elevating the level of these subfolders so all of the folders are at the same level?
I'm trying to change the display name of part at the part level (not an occurrence in an assembly). After the part file is saved initially I'm running an ilogic routine that assigns a "special" part number (not the same as the file name). I can get the part number into the PN iproperty easily but I can't find a way to programmatically change the display name in the top browser node. Please see attached for clarification.
I am really liking the change in grey level to indicate focus as I click on timeline or desktop or mediahub. I think this needs to be a larger change - maybe 20% of the intensity and would work better as a means of showing source/record focus than the annoying white outline. I also like the desaturate I suggested on the inactive timeline bar 0 its a very simple way of quickly seeing what is live (other than glancing at the broadcast monitor).
All's well that ends. That's why its called finishing.
where i cant see the opacity( you know like 100% and so on) its the same with audio level, position, scale etc. here's a print screen of it [URL]
The reson why it dissapeared is because when i pressed L-L on my keyboard to show the audio waves, but instead i must have pressed something wrong or maybe the layer the layer want selected.
I am struggling to import .stm file into a blank civil3d file. it does import whith correct sizes and elevation. the issue is rim level of structures are the same as SSA file but it will make 2 meter sump depth to stuctures, thus structures invert levels are not correct. i just made a sump depth rule for structure and applied to some of them. it will correct it but as i have more than 1000 manholes in network it will be a major job to apply the rule. i know "apply rule" command will work a lot but i would like to know why it is importing whit wrong properties?
After changing colors at assembly level only ,below is a rule that changes all parts that have material "Plywood" to poplar works great.
However I want a rule that does the same kind of change but on only temporally at assembly level only then we can change back to default colors by removing color override.
It would be good if we can do the following
Search assembly for .ipt files that have material that contains PlywoodChange to color using temporary override of "Clear - Light" Possibility of searching more materials within same rule ie : "Timber" to be black in color"Pvcu"to be white in color
Dim oCurrentDoc As Inventor.Document Dim oDoc As Inventor.Document Dim oPartDoc As PartDocument Dim oRefDoc As DocumentsEnumeratorDim oTargetColor As RenderStyleDim oNewColor As RenderStyleoCurrentDoc =
I've done batch processing before, but unsure of how to simply change the jpg compress on all files in a root folder (with subdirs). I guess I'm stuck in not knowing how to set the compression since this is done in the saving of the file and not really the script part.
I have a frame fabrication / assembly with a Custom iProperty called "FINISHED MATERIAL SIZE". I have set the following parameter for this property:
FINISHED MATERIAL SIZE = <Stock Number> x <G_L>mm
This returns the stock size and length to my drawing cutlist. The problem is that the <G_L> Parameter returns the trailing zeros and unit string.
I would like to set all the frame members in the assembly such that the G_L parameter returns a value rounded off to 0 decimal places with no trailing zeros and removes the unit string as well.
Is there a way I can achieve this from the assembly so I don't have to manually open each frame member and make the changes in the fx parameters dialog one at a time?
I am using this code placed in the .ipt file to change Sheet Metal material
If Material_SM=1 TheniProperties.Material="Steel"SheetMetal.SetActiveStyle("RB_Mild Steel")ElseiProperties.Material="AISI316"SheetMetal.SetActiveStyle("RB_Stainless")End If
It works fine presuming code placed in every .ipt file to be ruled.
Is it possible to modify code in a way so when it placed in top assebly it runs through entire assembly finds all Sheet Metal parts and applys Material prpperties/Sheet metal style according Material_SM parameter.
Inventor 2013 SP2 Windows 7, 64 bits RAM 18GB Core TM2 Duo CPU 2,99 Gz
I am using Gimp 2.8.0 but only understand about 5% or less of it. (It is running on Win.7 Hm. Prm., Vsn 6.1, Sp-1.)
How can I define or adjust the pencil tool so it draws at the one pixel size in a new ".gif" work area. (That would be one pixel in the image to one pixel on the screen.) I found how to define the work area in pixels for a ".gif". The predefined pencil tool sizes (chosen by assorted dots) "went away" several versions of Gimp back as far as I know.
The object of this effort is to produce "TrainGifs" for use in other applications. Should you be interested just Google "TrainGifs" and you will be able to check out multiple site for this hobby.
The underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
I'd like it, if an image is re-sized to the same percentage as the current zoom level, afterward the zoom is automatically switched to 100%
Typically, if I have an image too big for it's intended use, I'd adjust the zoom until I get it to appear the right size, then resize it to the zoom level. (I imagine many people do the same thing). However, after resizing, the view of the image is really tiny, since the old zoom level is now being applied to the smaller image.
Say I have an image where I'm attempting to extract a mask from and I've found that one of the channels will serve as a good starting point. Further suppose that I have found that I want to increase the luminance level of pixels in the range of 60 - 65 by 10 luminance levels each:
i.e. all pixels with luminance values of 60,61,62,63,64,65 would, after the operation have luminance values of 70,71,72,73,74,75. Is such a thing possible with Photoshop?
I am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
I've designed an image that I want to use as a arcade game control panel and I want to make it seem 3d, as the image is currently a rectangle.
I want to pull the image in at the top corners whilst retaining its dimensions so that it looks like your'e looking down on the control panel (hope Im explaining this ok?)
I have some photos that I would like to change the color of, so that I can have the same image in multiple colors. How do I do this using Photoshop CS4?
I want to print an image using an online service and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
is there any way to change image placement when dragging it into PS? Now all the images are placing automatically directly in my document (in current tab). I want i to open as a new tab.
I have PS CS4- never had this problem-today I can not change the size of an image- it indicates it is changed- but when I forwarded it to another site-it was not changed- I checked for updates and i turned the computer off and on- nothing worked
Just wonderinf if anybody could help with to change colour of map image attached to a different colour (image attached). As you can see the map as 'small dots' like a grid over it, so I cannot do a normal 'seclection' of area and 'paint bucket' action.
