I have PSÂ CS4- never had this problem-today I can not change the size of an image- it indicates it is changed- but when I forwarded it to another site-it was not changed-Â I checked for updates and i turned the computer off and on- nothing worked
View 2 RepliesI want to print an image using an online service and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
View 3 Replies View RelatedI'm trying to adjust the size of a specific image after the initial placement. I have tried "image size" and adjusted either by pixel size or percentage- but each time I do this it just adjusts the size of my entire canvas- not the individual photo I'm trying to adjust.
View 3 Replies View RelatedI have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
Is there a way in Photoshop to change the image size and resolution to a folder that has many jpegs images in it? Otherwise I will have to change the size and resolution to about 250 images. If Photoshop won't do it is there another program that will?
View 2 Replies View RelatedHow do change the file size on an image? Im trying to put a pic on twitter and it keeps telling me that the image is to big.
View 2 Replies View RelatedWhat is the best way to reduce an image's file size (say by 50%) so that someone with limited RAM can work on the file and then when they are done restore the file back to its 100% size for final output--without sacrificing resolution or pixels. File is a layered psd and will eventually be going to print.
View 3 Replies View Relatedhave a photo that was taken by a photographer so it is very large. I want it as a Facebook Cover for my business page but when i try to make it fit the required height and width is is either to small or if i change the image size or canvas size it doesn't look right...
View 3 Replies View RelatedAfter spending time in PS elements 11 making changes in color and applying frames etc. I noticed after saving the file my resolution went from 5.5Mb to 847kb. Why is this?
View 29 Replies View RelatedI want to change the size of a image for instance image size 6"x4" I would like to change this to 3"x3" or 4"x4" without distorting the image. It is easy to do this in paint.net
View 5 Replies View RelatedI am creating a carpet tile family that is sized at 18"x36". When I load the image from the manufacture into the material I give it the 18"x36" size, but get something different in the family and project. See image attached.
Â
I want the red lines to be at the bottom of the family.
Â
I tried to change the material image size to 36x36" and it only scales in the y direction. I also tried to offset the image so it fills the family area and that doesn't seem to work either.
Currently the screen has a black border when I scroll to reduce the image size. Originally it may have been white.
View 1 Replies View RelatedSo some of you may have used, are using or heard of the Fill from clipboard plugin. Is there any way that you can get it to change the size of the image within or stop it from being tiled? Tiled as in picture next to picture next to picture?
View 1 Replies View RelatedIs it possible for me to change the default size of the new image which loads when paint.net is started?
It would be useful for me to start with an image size of 1024 x 1024.
I am aware that I can change the size of images, and that the size of any new image created after loading is the same as the last image.
Edit: I just realised a workaround. I saved a blank 1024 square pdn file to my desktop. Clicking this starts paint.net with this sized image.
I am unable to change the size of an image or text box. It allows me to click on the image or text box but does not allow me to change the size of it with the mouse. I can change it by right clicking on scale and entering in details but I am not able to change it manually.
View 2 Replies View RelatedI wanted to combine two images one needs to be fit to the scale of the background image. So basically I followed the instructions.
Open up your background layer which was 800x600 landscape photo.
Then I imported my other image which was 600x800 portrait photo too. Layers -Import from file. I resized it then copied into a new layer. That was fine.
The problem is as soon as the new image is imported, the background image changes so that it only takes up half of the canvas. So now I've got a white area for half of the canvas. I can't seem to change this.
I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
 My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View Relatedi currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View Related1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedIn the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting.Is there a way to set that to default to "fit".
View 6 Replies View RelatedI have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem.   I've seen similar questions, but not an answer that has resolved this for me. I have an image I have sized to fit an 8.5 x 11 inch paper. Canvas and image size all indicate my image is sized at 7.33 x 11 inches. It is at 300 dpi. Print size view indicates full space is utilized on either side….BUT…
Â
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer) image prints smaller with a bar on one side. .
When I uncheck STFM,
I get:
scale - 92.67%,
[code]...
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies View Related When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
can a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?