Revit :: Change Material Image Size
Jul 24, 2012
I am creating a carpet tile family that is sized at 18"x36". When I load the image from the manufacture into the material I give it the 18"x36" size, but get something different in the family and project. See image attached.
I want the red lines to be at the bottom of the family.
I tried to change the material image size to 36x36" and it only scales in the y direction. I also tried to offset the image so it fills the family area and that doesn't seem to work either.
View 5 Replies
ADVERTISEMENT
May 26, 2013
I am usually fine with changin the materials by going to visibility settings- imports and changing the materials.
However I have a file where I cannot change the material no matter what I do. I tried importing it as a family, I tried exploding the dwg, I tried setting the layers to 'color by layer'. It is beyond me
There is another file where I can only change some layers but not the others.
View 1 Replies
View Related
Jan 20, 2014
I understand how to change material by family type but how can I change object subcategory by family type? Is this possible?
View 5 Replies
View Related
Sep 4, 2013
I am having a very strange issue that appears in the Materials editor within Revit 2013 Update Release 3. If I change a surface or cut hatch pattern within the editor, and then attempt to close out of the editor, go to a different material, or apply the change, the hatch dialog pops right back up again, as if I never closed it. I have found two ways to get out of this obnoxious loop:
1. Use the 'esc' key to back out of the materials dialog (unfortunately no changes are saved).
2. Change the color of the hatch - this allows for the changes to be applied etc.
I've tried resetting the UI and reinstalling Revit to no avail.
View 1 Replies
View Related
Feb 5, 2014
I am using Revit 2014 student version. I have an image in jpg and would like to add it to material library.
How do I do this?
View 1 Replies
View Related
Nov 26, 2011
Im trying to print A0 sheets and was just wondering if its possible to change the paper size to 594 x 1682. Pretty much to have 2 A1 sheets in portrait on top of each other.
View 1 Replies
View Related
Feb 21, 2012
We are trialling Revit for the first time and have made good progress in modelling a building we have already designed.
We have set up an A1 title sheet to match our existing one and have successfully printed at A3 by using the Center option with zoom 50%.
However when the zoom sheet size icon is selected the view zooms to an A4 Landscape view and I would rather it zoomed to the extents of the A1 frame but I haven't been able to redefine the sheet settings. Where I can find these settings?
I have opened all Metric Title block families from A0 to A4 and they all appear to zoom to an A4 Landscape extent. Amusingly the A4 Metric Title block is Portrait.
View 1 Replies
View Related
Apr 30, 2013
Is it possible to create a wall in Revit that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 2 Replies
View Related
Dec 21, 2011
Can the font size units be changed to point?
View 1 Replies
View Related
Jul 10, 2012
Is there a way to change the font type and size of the Level within the schedule?
View 1 Replies
View Related
Dec 20, 2011
Quick easy way to change the default insertion size of the section and callout heads. They're too large.
View 3 Replies
View Related
Jul 23, 2012
I want to print an image using an online service and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
View 3 Replies
View Related
May 18, 2012
I have PS CS4- never had this problem-today I can not change the size of an image- it indicates it is changed- but when I forwarded it to another site-it was not changed- I checked for updates and i turned the computer off and on- nothing worked
View 2 Replies
View Related
Mar 20, 2006
I'm trying to adjust the size of a specific image after the initial placement. I have tried "image size" and adjusted either by pixel size or percentage- but each time I do this it just adjusts the size of my entire canvas- not the individual photo I'm trying to adjust.
View 3 Replies
View Related
Oct 16, 2013
I want to change the size of a image for instance image size 6"x4" I would like to change this to 3"x3" or 4"x4" without distorting the image. It is easy to do this in paint.net
View 5 Replies
View Related
Feb 10, 2009
I have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
View 11 Replies
View Related
Jul 30, 2012
Is there any option to change the resolution of an inserted image (jpg, bmp, png etc.) in revit interface? See the attachments.
View 4 Replies
View Related
Nov 24, 2005
Is there a way in Photoshop to change the image size and resolution to a folder that has many jpegs images in it? Otherwise I will have to change the size and resolution to about 250 images. If Photoshop won't do it is there another program that will?
View 2 Replies
View Related
Dec 10, 2011
So some of you may have used, are using or heard of the Fill from clipboard plugin. Is there any way that you can get it to change the size of the image within or stop it from being tiled? Tiled as in picture next to picture next to picture?
View 1 Replies
View Related
Mar 24, 2011
Is it possible for me to change the default size of the new image which loads when paint.net is started?
It would be useful for me to start with an image size of 1024 x 1024.
I am aware that I can change the size of images, and that the size of any new image created after loading is the same as the last image.
Edit: I just realised a workaround. I saved a blank 1024 square pdn file to my desktop. Clicking this starts paint.net with this sized image.
View 2 Replies
View Related
Feb 26, 2013
How do change the file size on an image? Im trying to put a pic on twitter and it keeps telling me that the image is to big.
View 2 Replies
View Related
Sep 1, 2013
I am unable to change the size of an image or text box. It allows me to click on the image or text box but does not allow me to change the size of it with the mouse. I can change it by right clicking on scale and entering in details but I am not able to change it manually.
View 2 Replies
View Related
Jul 13, 2013
What is the best way to reduce an image's file size (say by 50%) so that someone with limited RAM can work on the file and then when they are done restore the file back to its 100% size for final output--without sacrificing resolution or pixels. File is a layered psd and will eventually be going to print.
View 3 Replies
View Related
Oct 4, 2013
have a photo that was taken by a photographer so it is very large. I want it as a Facebook Cover for my business page but when i try to make it fit the required height and width is is either to small or if i change the image size or canvas size it doesn't look right...
View 3 Replies
View Related
Jun 15, 2011
I wanted to combine two images one needs to be fit to the scale of the background image. So basically I followed the instructions.
Open up your background layer which was 800x600 landscape photo.
Then I imported my other image which was 600x800 portrait photo too. Layers -Import from file. I resized it then copied into a new layer. That was fine.
The problem is as soon as the new image is imported, the background image changes so that it only takes up half of the canvas. So now I've got a white area for half of the canvas. I can't seem to change this.
View 2 Replies
View Related
Nov 26, 2012
I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
View 6 Replies
View Related
Dec 15, 2012
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
View 2 Replies
View Related
Jan 26, 2013
After spending time in PS elements 11 making changes in color and applying frames etc. I noticed after saving the file my resolution went from 5.5Mb to 847kb. Why is this?
View 29 Replies
View Related
Mar 14, 2013
Currently the screen has a black border when I scroll to reduce the image size. Originally it may have been white.
View 1 Replies
View Related
Dec 5, 2012
If i choose a generic wall, and spilt it into layers, and let say the middle layer is going to be insulation, when i click on the material button nothing happens?, I can't load a material, it's a huge problem, and i have tried to repair revit, and uninstall in then reinstall, didn't work.
View 2 Replies
View Related
Dec 3, 2013
is there a way to specify a new construction material with a new material id number in the xml file so that when I construct a wall for example, I can pull that material into the wall layer? For example, I'd like to create a new insulation material that's currently not in the normal material library, but I don't know how to specify the material id number in the xml file...
View 1 Replies
View Related
