Revit :: Can't Change Hatch Patterns In Material Editor
Sep 4, 2013
I am having a very strange issue that appears in the Materials editor within Revit 2013 Update Release 3. If I change a surface or cut hatch pattern within the editor, and then attempt to close out of the editor, go to a different material, or apply the change, the hatch dialog pops right back up again, as if I never closed it. I have found two ways to get out of this obnoxious loop:
1. Use the 'esc' key to back out of the materials dialog (unfortunately no changes are saved).
2. Change the color of the hatch - this allows for the changes to be applied etc.
I've tried resetting the UI and reinstalling Revit to no avail.
I need to select various shading patterns in a section view drawing and assign all the same settings using VBasic but can not find the way to go. For example, all a 45 degree angle and scale to 0.25.
Have just installed Revit 2014. Material editor will not open with icon (Manage>materials) or Type Props>Edit Assembly>Material. Additionanl Setings>Material Assests is greyed out. I have gone back to a project where I know the Asset Library is loaded as well as trying in one of the new sample files. Additionaly means I cant add or change any layers in Edit Assembly.
Im trying to load up custom textures in the material library in revit 13..And Im having a hell of a time trying to load them into the editor. What are the required steps in order to load and edit custom textures in the material editor in Revit 13.
correct process for animating a Material color change using AutoKey and the Curve Editor.
Right now, I am only able to crudely manipulate the color change by setting the material color change while the AutoKey is active.
The problem is that I am unable to control the speed/time at which the color change actually transpires in the scene.
So far, the only solution I have found, is to set the color change hundreds of frames after the point at which I want the color change to actually occur.
Normally, I would go into the curve editor and and manipulate the keys for the color change to slow or speed up the transition, and to control the exact timing.
However, even though I am able to locate the color change key(s) in the Curve Editor, I either do not know how to properly manipulate them, or I don't know what keys I actually want to manipulate.
I am accustomed to sliding keys left and right and using null keys to hold a key frame (in the this case the color prior to change, which is grey, and then the color after the change, which is fuchsia. however sliding keys around in the curve editor, when I have the "fuschia" key(s) selected (I misspelled the name, so in the file it is "fuschia" not "fuchsia"), does not seem to affect the actually timing of the color change.
FYI, the material that I am attempting to animate is the "fuschia" material in the Compact Material Editor.
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
I am completely new to ilogic but would like to make a rule in my idw file that change the hatch pattern in a section of a specific material.
Short Version:
I have an aluminum extrusion part. Material is set to Aluminum-6061. In any section view of this part I want the hatch to be ANSI 31 with a rotation of 45 degrees and a scale of .02 How do I do this?
I am usually fine with changin the materials by going to visibility settings- imports and changing the materials.
However I have a file where I cannot change the material no matter what I do. I tried importing it as a family, I tried exploding the dwg, I tried setting the layers to 'color by layer'. It is beyond me
There is another file where I can only change some layers but not the others.
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
I am creating a carpet tile family that is sized at 18"x36". When I load the image from the manufacture into the material I give it the 18"x36" size, but get something different in the family and project. See image attached.
I want the red lines to be at the bottom of the family.
I tried to change the material image size to 36x36" and it only scales in the y direction. I also tried to offset the image so it fills the family area and that doesn't seem to work either.
Im on Max 2011 with sp1 and the latest hotfix installed, working with vray 1.5 sp5. When i try to re-set mu material editor (compact not slate) i get the folllowing error message
"Runtime error: cannot assign undefined to material editor slots" and a Macro_media utilities window opens with the following script
macroScript clear_medit_slots enabledIn:#("MAX", "VIZ") category:"Medit Tools" internalCategory:"Medit Tools" ButtonText:"Reset Material Editor Slots" tooltip:"Reset Material Editor Slots" [code]....
I'm not a scripter but it seems that there is no material defined to place into the slots on re-set. I've recently had a problem with my material editor not giving me acess to slate as i had loaded up my 2010 menus into 2011 but i've since re-installed max and vray and am still getting this.
I am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
I have two, seemingly identical, installations of AutoCAD LT 2012 on two machines in our office. Both machines have the MEASUREMENT variable set to 1.
The acadltiso.pat file of both machines has been customized with the addition of two hatch patterns and both of these work just fine.
In addition, the support folders of both installation also have identical sets of custom hatch patterns. On one of these machines thumbnails for these are visible and all works entirely as expected. However, on the other machine, none of these custom hatch patterns appear at all. In fact I cannot even see the custom hatch pattern tab!
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
I have been using AutoCAD Civil 3D lately but went to use my AutoCAD 2011 I noticed I have no hatch patterns. I thought that these patterns were located in the support folder so I got my DVD that has the program on it out and was going to reload AutoCAD to fix the problem. It would not reload it so I copied the support folder to my computer in the AutoCAD file and still nothing. What can I do to get my hatch patterns back?
I am trying to load hatch files from StoneCAD. In the past I have been able to take hatch patterns from various sources and locate them in a file within AutoCAD LT, then use them without issue.
I have never touched a .pat file or written anything in notepad or word, just simply copied the .dxf files to a file on my computer and was able to use them through AutoCAD LT 2009. Recently I had to reload the software and I can't figure out where I would go to put these hatch files.
