Revit :: How To Change Material By Family Type
Jan 20, 2014I understand how to change material by family type but how can I change object subcategory by family type? Is this possible?
View 5 Replies
ADVERTISEMENT
Revit :: 2014 - Custom Family Type Material Editing
Jan 5, 2014I am trying to take a custom counter I created as a family and have it show a material in my project. It seems that no matter how I apply the material parameter to the family type object, type or instanced, the material does not change in the project when I apply any new material. I have opened up other countertops I have used from the Revit Default Casework Family and I can't seem to find a difference in the setup between mine and Revit. I wanted to use an instanced parameter so I can change the material per room where the object is used.
View 5 Replies View RelatedRevit :: Family Will Not Change Type After Load
Feb 21, 2012I'm going through a tutorial on families (Paul Aubin) and have created a shelf w/ nested brackets that works as expected when flexed in the family editor. Any project I load it into shows it at its default configuration, but when I select it in the project and change it's type in the properties box, the configuration does not flex - it stays as inserted. It also shows my parameters in the properties box as individually modifiable.
View 4 Replies View RelatedRevit :: Change Family Type From Generic To Ceiling
Dec 1, 2013I recently built a model-in-place generic model ceiling canopy using Revit 2013. I want to place lights (recessed cans) in the model. Can I change the model type to ceiling or is there a way to place light fixtures in it?
View 2 Replies View RelatedRevit :: Vanishing Material In 2012 Family?
Nov 20, 2012I built a basic facade system as a family in Revit 2012, but the materials won't stick. Every time I try to edit the family and assign a material, the material doesn't show up in the Revit file it's loaded into. Then, when I open the family back up to try editing it again, the material that I assigned to it five minutes ago is already reset to default, despite my saving and reloading it several times.
View 1 Replies View RelatedRevit :: Using Nested Family To Create Material Link
Oct 24, 2011I assigned my students to create lighting fixture family. I wanted them to create a drop-down list of materials within the family to allow a user to select from the list of materials. This is accomplished by using a nested family - the inserted family has the materials defined. The drop-down list appears just fine in the properties, but we aren't able to apply it to the extrusion. I have tried inserting each family type and using the Label parameter, but Revit won't allow the link.
View 5 Replies View RelatedRevit :: Missing Material Cut Properties In Door Family?
Jan 7, 2012I have created a door family that has a concrete fill that replaces the insulation in an insulated precast wall. When I cut a section through the jambs looking down it looks correct but when the section is looking up the concrete fill pattern is not visible.
I would typically cut my sections looking up so that the exterior face is down in the view as it will be cast.
Revit :: Setting Family Type To Be Default?
Jul 23, 2008I am trying to find a way to set a particular type in a family as default so that when the family is loaded, that type is what I am inserting.
View 3 Replies View RelatedRevit :: Add Different Materials In Family Type Window
Apr 10, 2013I would like to add different materials in Family type window (value column drop down). How to attain this?
How to create/use shared parameters for linking data through .txt file? If possible replay with images,that will be useful to understand.
Revit :: How To Use The Family Type Dropdown Parameter
Jun 21, 2013I have a family, with three nested families: A, B and C.
Either A or B can be picked through a "Family Type" parameter. Family C is locked to a reference plane, which is defined by a dimensional parameter called "Offset." Is there a way to have the value of "Offset" change based on whether A or B is loaded? Not sure how to use the "Family Type" dorp-down parameter in/with a formula to do so.
Revit :: Add Dynamic Label To Display Family Type Name
Jan 14, 2014Is there a way to add a label that will display the family type name. So when i change the type it will change the text?
View 9 Replies View RelatedRevit :: Family Type Parameter Breaks Constraints?
Mar 23, 2013I am creating a family for a mobile shelf assembly. While an obvious way to create it would be to use an array, because the client needs to be able to tag each shelf unit separately, that can't be done. The client does, however, have a limit of 10 banks maximum, so I've created ten banks in hte family that are controlled by visibility parameters.
Each of the banks can be a different type of shelf (the shelf units are nested families) but they are always of the same overall length and width in any one run.
Here's my problem, Everything flexes correctly as long as the depth of the units stays the same as they were when the family type parameters were assigned to the shelf families as labels. When you try to create a new Type using a wider shelf unit, you get errors.
Without the Family Type parameters assigned as labels, all of the reference planes meant to drive the location of the shelves flex correctly.
I'm using Revit 2013.
Revit :: Text In Detail Component Family Type
Mar 25, 2013I've been doing some family as an independent construction detail revit model, I think that is the most appropriate type of detail component. Graphically everything right but I encounter the following problem, all built to type text is not visible in the project then.
How do you control the display? or do you like I can put a text in a detail component family? and if not visible... why would have the option of make texts? Is the only option to annotate after in the project insertion?
Revit :: Referencing Imported Family Type In Formula?
Jul 15, 2013I wish to create a formula for a family parameter which itself references a 'Type' of an imported family. Specifically I wish to create a quoin stack which can be used for a 'reveal' situation either side of a door or window rather than just on a corner. A 'quoin stack,' as that which comes with the revit content files, typically is made up of two vertical arrays which intersect giving alternative long and short sides. Each of the arrays is made up of a different quoin type, a 'Short' and a 'Long' type which swap dimensions from from perpendicular face to the other. This of course is no good for a reveal situation where on the window or door reveal of both interleived courses needs to be the same, whilst maintaining the 'long/short' appearance on the wall face containing the window or door.
I have got so far as to create a 'reveal depth' parameter within the quoin stack family but need to find a way of addressing the 'Long' quoin type to change its 'short' dimension to suit the reveal depth whilst changing the 'long' dimension of the 'Short' quoin type to be the same.
Revit :: How To Change Text Font In Stairs Family
Jan 23, 2013we are using a custom font throughout the whole project, I need to use the same font within the stairs family , how do I change the "DN" in stairs to the other font?
View 5 Replies View RelatedRevit :: Modify Windows Family - Change Axis Of Insertion Of Window In The Wall
Jul 19, 2012I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
View 4 Replies View RelatedRevit :: Can't Change Material Of DWG Import?
May 26, 2013I am usually fine with changin the materials by going to visibility settings- imports and changing the materials.
However I have a file where I cannot change the material no matter what I do. I tried importing it as a family, I tried exploding the dwg, I tried setting the layers to 'color by layer'. It is beyond me
There is another file where I can only change some layers but not the others.
Revit :: How To Align Nested Family To Reference Line In Host Family To Rotates Around A Certain Point
Jan 29, 2014I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
Revit :: Change Material Image Size
Jul 24, 2012I am creating a carpet tile family that is sized at 18"x36". When I load the image from the manufacture into the material I give it the 18"x36" size, but get something different in the family and project. See image attached.
I want the red lines to be at the bottom of the family.
I tried to change the material image size to 36x36" and it only scales in the y direction. I also tried to offset the image so it fills the family area and that doesn't seem to work either.
Revit :: Can't Change Hatch Patterns In Material Editor
Sep 4, 2013I am having a very strange issue that appears in the Materials editor within Revit 2013 Update Release 3. If I change a surface or cut hatch pattern within the editor, and then attempt to close out of the editor, go to a different material, or apply the change, the hatch dialog pops right back up again, as if I never closed it. I have found two ways to get out of this obnoxious loop:
1. Use the 'esc' key to back out of the materials dialog (unfortunately no changes are saved).
2. Change the color of the hatch - this allows for the changes to be applied etc.
I've tried resetting the UI and reinstalling Revit to no avail.
Revit :: Change Dimension String Type
Sep 19, 2012Can we change the dimension string type continuous to other line type without Override Graphics in View>By Elements option in Revit?
View 3 Replies View RelatedRevit :: How To Change Type Of Curtain Wall System
Oct 6, 2011I am having a problem with creating a curtain wall system. After selecting my mass surfaces and choosing "create system" I am unable to change the type of curtain wall system. It just comes up with a regular grid system on the mass, where as before I was able to choose triangles, rhomboids etc under the properties tab. Now however I see nothing except for the current curtain system and recently used files.
I have also created a custom panel which I want to insert into my project but am unable to do so? I have tried loading it into the project, however because of the above problem I am not able to change it to my custom panel system.
Revit :: Change Window From Shared To Non-shared In Family Editor
Nov 3, 2011I am making a nested family of windows and inserted the windows as shared and I need them as non shared. Is there a way to change the window from shared to non shared in the family editor?
View 2 Replies View RelatedRevit :: Change Font Type And Size Of Level Inside Schedule?
Jul 10, 2012Is there a way to change the font type and size of the Level within the schedule?
View 1 Replies View RelatedAutoCAD Inventor :: CC Customized Family Table Not Showing Material In Place Dialog Box?
Nov 30, 2012I have recently modified the CC of a part family so that different materials for the same part can be chosen. When I exit the editor and place the component I can see the choice of the materials in the dialog box - no problems (See 1st attachment" But when I go to another users PC they cannot see any of the new materials in the "Place content center" dialog box!?!
For information, we are running Inv. 2011 with Vault Professional 2012
The CC libraries are stored on the server and we have one custom library to which I have publish the modified part family.
The custom CC has been fully synchronised with the Vault server.
The materials.xml containing the new materials used in the part family has been downloaded to the users local workspace.
Inventor 2014 Pro SP1, Vault 2014 Pro SP1
Windows 7, 64-bit
Intel Xeon 3.6GHz
32GB
Nvidia Quadro 4000
Illustrator :: How To Change Type Insertion Point Vs Type Tool Cursor Position
Feb 11, 2014I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies View RelatedAutoCAD Inventor :: Not Able To Select Material Type
Dec 28, 2011I wonder why I was not able to select the material type. I may have accidentally toggle off/on some selection.
View 2 Replies View RelatedAutoCAD Inventor :: Assign Layer To Each Type Of Material?
Oct 29, 2012i was wondering if there is anyway to assign a layer to each type of material used so that i can have the material shown in different colors on my drawings?
View 2 Replies View RelatedAutoCAD Inventor :: Material Delete And Type Mismatch?
Aug 29, 2013I'm trying to delete a material called "Generic" from a part.. I can't delete the material (delete greyed out) I try to add another material to the document and I still can't delete the "Generic" material... I added a new material from the drop down box at the top... It says the correct material but when i open the material library dialog again it says "generic" instead of the proper material name that I selected... Is this a bug? See picture.
View 9 Replies View RelatedRevit :: Load Family Dialog Box Does Not Appear?
Jul 18, 2013In Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
View 2 Replies View RelatedRevit :: Can't Rotate Simple Family
Jul 5, 2013I've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
