Revit :: How To Change Text Font In Stairs Family
Jan 23, 2013we are using a custom font throughout the whole project, I need to use the same font within the stairs family , how do I change the "DN" in stairs to the other font?
View 5 Replies
ADVERTISEMENT
Revit :: Family Will Not Change Type After Load
Feb 21, 2012I'm going through a tutorial on families (Paul Aubin) and have created a shelf w/ nested brackets that works as expected when flexed in the family editor. Any project I load it into shows it at its default configuration, but when I select it in the project and change it's type in the properties box, the configuration does not flex - it stays as inserted. It also shows my parameters in the properties box as individually modifiable.
View 4 Replies View RelatedRevit :: How To Change Material By Family Type
Jan 20, 2014I understand how to change material by family type but how can I change object subcategory by family type? Is this possible?
View 5 Replies View RelatedPhotoshop Elements :: Text / Font Family - How To Get Drop Down Menu To Work
Jan 17, 2013I can't change the text fonts in Elements 9. Most everything else seems to work except the font family drop down menu. When I click on the arrow, the menu drops but immediately dissappears. The font size drop down works but not the family menu.
View 5 Replies View RelatedRevit :: Change Family Type From Generic To Ceiling
Dec 1, 2013I recently built a model-in-place generic model ceiling canopy using Revit 2013. I want to place lights (recessed cans) in the model. Can I change the model type to ceiling or is there a way to place light fixtures in it?
View 2 Replies View RelatedRevit :: Modify Windows Family - Change Axis Of Insertion Of Window In The Wall
Jul 19, 2012I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
View 4 Replies View RelatedRevit :: Text In Detail Component Family Type
Mar 25, 2013I've been doing some family as an independent construction detail revit model, I think that is the most appropriate type of detail component. Graphically everything right but I encounter the following problem, all built to type text is not visible in the project then.
How do you control the display? or do you like I can put a text in a detail component family? and if not visible... why would have the option of make texts? Is the only option to annotate after in the project insertion?
Revit :: How To Lock Text In Line Based Family
Mar 4, 2014I've created a line based family with a imported text label, but if I move the line to 45°, the text also moves 45°. Any way of keeping that text locked?
View 3 Replies View RelatedRevit :: How To Align Nested Family To Reference Line In Host Family To Rotates Around A Certain Point
Jan 29, 2014I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
Revit :: Title Block Family - Editing Text On Project
Nov 22, 2011I've created a Title Block Family and when I bring it into the project I want to be able to edit the text on the project without having to go into the Family and edit it from there, how do I do this?
View 2 Replies View RelatedRevit :: Change Window From Shared To Non-shared In Family Editor
Nov 3, 2011I am making a nested family of windows and inserted the windows as shared and I need them as non shared. Is there a way to change the window from shared to non shared in the family editor?
View 2 Replies View RelatedRevit :: Monolithic Stairs - Get Rid Of Line At Top?
Aug 25, 2011My stairs go from Level 1 to 2 and join a concrete floor at level 2.
The stairs are monolithic.
The problem I have is that at the top of the stairs the end riser can be seen and so it appears as an extra tread when viewed in plan.
See attached file, the red cross marks the lines which I need to remove.
I cannot join the stairs to the slab.
How can I remove these lines - is there something better than a masking region? can I set something in the family?
Revit :: Stairs Below Level - How To Add A Cut Line
Apr 9, 2012I noticed that Revit likes to show the entire stair going down. This works for me in a lot of cases but I have a project that the second floor is showing the stair all the way down to the first floor, and there is another stair going from the second floor to the third that I really need to see.
Plan regions don't seem to allow me to add a break line below the second floor and see the stair from the second to the third floor. The floors are on and the view is set to hidden.
The attached png shows the up stairs in blue that I would like to see and the Down stairs I would like to cut at the landing.
Revit :: How To Create Railings Along Stairs
Nov 8, 2012I have a stair that along one side of the sloping part is a window. I have 2 railings along this stair, 1 is a chair rail, the other is a wainscot panel. Obviously the chair rail and wainscot cannot be built to cover the window.
How can the railings be "cut" around the window?
I know how to start/stop the chair rail, but the wainscot needs to continue under the window (keeping in mind that the window is horizontal and the wainscot is sloping with the stair.)
Revit :: Unable To Get Stairs To Cut Half Way Down
Jun 14, 2012I can't seem to get the stairs to cut say half way down. The normal view range for the view doesn't cut it, and neither does a plan region. Going up is great, I don't see why cutting it down is so difficult...?
View 5 Replies View RelatedRevit :: Joining Flights Of Stairs
Nov 6, 2013I have the following flights of stairs running down one side of my building:
Landing, 6R with 170mm height, Landing, 3R with 190 height, Landing, 7R with 182 height.
I've modeled this as 3 separate flights of stairs because of the 3 different riser heights. The top landing is a floor slab, as is the bottom landing. I've modeled intermediate landings as either the top or bottom tread of a flight. How do I deal with the junctions of these stairs? The monolithic concrete will not join. The materials of both components are set to <By Category>.
Revit :: Stairs Won't Extend Up To Second Floor?
Feb 11, 2013My stairs won't extend up to second floor. I am using Revit 13 and have created many stairs in past with other models. I have tried stair by sketch and stair by component but they keep stopping about 2 feet short of the floor drawing a standard U shape.
View 2 Replies View RelatedRevit :: Base Of Stairs Visible Through Floor
Jan 12, 2013See attachment.
I can't figure out why the bas is visible through the floor :s while the middle part is not. The part where you can see the color of the stairs is cut out of the floor.
Revit :: How To Create Flight Of Stairs By Component
Mar 4, 2013I'm trying to create a flight of stairs by component (Revit 2013). When I view them in 3D I notice that one of the walls from Level 1 that should be "cut" where the stair run intersects the wall @ top of wall, does not cut and instead goes through the staircase up to level 2. How to get this wall to be "cut" following the rise of the stairs? I've remade the stairs dozens of times and it still does not automatically cut the wall.
View 2 Replies View RelatedRevit :: Removing Riser While Creating Stairs?
Nov 29, 2012I have been trying to create a stair case but i can not get the top of the stairs to line up correctly. When i do gent one platform to line up the riser sticks up above it.
View 4 Replies View RelatedRevit :: Change Font Size Units To Point
Dec 21, 2011Can the font size units be changed to point?
View 1 Replies View RelatedRevit :: Assign New Railing To Be Hosted By Existing Stairs
Dec 22, 2011How do you assign an exisiting stairs to be the host of a new set of railing?
View 1 Replies View RelatedRevit :: Control Height Of Camera For Walkthrough To Go Up Stairs
Nov 11, 2012I am trying to control the height of the camera for a walkthrough so that I can go up stairs. I know that I can activate the "Mini Tour Building Wheel" and can do it that way but it is very clunky to use and I don't always get the right angles. Is there a simple way to control each key frame's heights like you normally would a camera (eye and target elevations)?
View 1 Replies View RelatedRevit :: Monolithic Stairs - Joining To Walls And Slabs
Mar 17, 2009What is a good way to finish up the monolithic stairs?
- How can I join the top tread to the upper floor slab? (red circle in attached sketch)
- And is there a way to join the CIP monolithic stairs to the CIP walls? (blue circles)
Revit :: Sloped Floors - Join With Horizontal And Put Stairs
Mar 22, 2013I have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
Should I do that? If I try to use floors.....
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
My dream would be to join then floor and stairs.... The material is the same
Revit :: Stairs Not Snapping To Required Level For Theatre
Jun 11, 2012I have some stairs which I want to be on a certain level however they are not going onto that level. I have made each row of them into a group as they are for a theatre.
View 6 Replies View RelatedRevit :: Different Dimensions And Location In Plan And Section Views For Stairs?
Aug 18, 2011Why am I getting different dimensions and locations in plan and section views for stairs?
View 4 Replies View RelatedRevit :: Change Font Type And Size Of Level Inside Schedule?
Jul 10, 2012Is there a way to change the font type and size of the Level within the schedule?
View 1 Replies View RelatedAutoCAD .NET :: Change Font In Tooltip Text?
Jan 23, 2012Method to change the font inside the the tooltips generated when you hover over an object?? I have followed the tutorials from the developers specifically lab 6 which uses the point monitor event to append text to the tooltips when the aperture is hovering over an item in autocad. I would like to be able to make certain words bold but so far have not figured out how to do so.
View 2 Replies View RelatedGIMP :: How To Change Color And Font Of Text - 2.8
Jul 28, 2012I need it in 3 different colors, and 3 different fonts. So far when I try it doesn't work.
I can do the first word in one layer and open up a second layer for the next few words, but as soon as I start typing the second word, the first one becomes the color of the second word.
AutoCad :: Change Global Text Font
Dec 6, 2006Basically, we get documents from other people and we convert those to our formats to do our work. We use a font called Simplex, but sometimes their document is filled with, like, Comic Sans or something stupid.
The match properties command doesn't seem to change font, just size and alignment. When I use the font properties dialog box, I can set simplex as the font, but when I make new text, it still matches their comic sans.
So two questions: How do I change the default font for the document so that all new text is the way I want it?
And is there a LISP routine which will find all text and change the font property and stuff the way I want it? For multi-line and single line text.
Also note, I've tried selecting all the text and editing properties, but font is not one of the properties I can change. To change font, I have to edit every piece of text one by one. And then ONLY multiline text has the properties to change font. I don't even know how to change the font of a single line text object.