I have been using AutoCAD Civil 3D lately but went to use my AutoCAD 2011 I noticed I have no hatch patterns. I thought that these patterns were located in the support folder so I got my DVD that has the program on it out and was going to reload AutoCAD to fix the problem. It would not reload it so I copied the support folder to my computer in the AutoCAD file and still nothing. What can I do to get my hatch patterns back?
I opened a drawing that I had not opened in over a month originally created in AutCAD 2011, and now using 2012. It appears only some of the hatch patterns that I created are now duplicated, and in some cases up to 17 times! When I select the pattern it doesn't show that there are multiple hatches underneath, but when selected it shows in the properties box All(2) or more. One of my patterns was scaled down and rotated 90 degrees and because when I select it it's showing 10 entities selected I cannot scale it back or rotate it without deleting and re-hatching. The .dwg is pretty complex so doing this for every hatch that shows multiple would be very tedious.
Recently switched from AutoCAD 2006 to AutoCAD 2012, I have hatch patterns set up for different area, with scale, layer, etc., when inserted using the Tool Palette. Never had an issue with it, but in 2012 it doesn't seem to work. Instead of inserting the hatch with the layer specified in the tool palette, it assigns the hatch pattern whatever layer was used when hatching a previous area, using the hatch dialog box.
I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
recently installed Acad R2010 and I need to install new custom hatches but don't know how.... I got working with Autocad since 1990; probably it was R2.0. This is the first time that I try to do it, so I don´t want to mess the whole thing misplacing my .pat files.
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
A work mate here at sometime or another clicked on the "always perform my current choice" check box when the "Hatch - Large, Dense Hatch Patterns" dialogue box appeared.
Question is, is there anyway to reset this so the dialogue box comes back up?
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
I am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
I have two, seemingly identical, installations of AutoCAD LT 2012 on two machines in our office. Both machines have the MEASUREMENT variable set to 1.
The acadltiso.pat file of both machines has been customized with the addition of two hatch patterns and both of these work just fine.
In addition, the support folders of both installation also have identical sets of custom hatch patterns. On one of these machines thumbnails for these are visible and all works entirely as expected. However, on the other machine, none of these custom hatch patterns appear at all. In fact I cannot even see the custom hatch pattern tab!
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
I am trying to load hatch files from StoneCAD. In the past I have been able to take hatch patterns from various sources and locate them in a file within AutoCAD LT, then use them without issue.
I have never touched a .pat file or written anything in notepad or word, just simply copied the .dxf files to a file on my computer and was able to use them through AutoCAD LT 2009. Recently I had to reload the software and I can't figure out where I would go to put these hatch files.
I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?
I need to select various shading patterns in a section view drawing and assign all the same settings using VBasic but can not find the way to go. For example, all a 45 degree angle and scale to 0.25.
Inventor 2010 Style and Standard Editor includes 35 CUST## hatches. My guess is, it stands for custom. Is there a way to import hatch patterns from AutoCAD PAT file? This functionality is available for line types through importing AutoCAD LIN file.
Xeon CPU 3.6GHz Nvidia Quadro FX 3400 Driver version 6.14.11.8246 Win XP Pro (32) SP3 4GB RAM w/o 3GB switch AIS 2010 SP1
I am having some trouble with hatch patterns. We are using FM Systems as our CAFM tool and there is a plugin for it within AutoCAD. The plugin allows you to create hatch patterns for things such as departments and space types. Right now this is working perfectly within AutoCAD 2012. However, when I try to run the routine within AutoCAD 2014, the only hatches that show up are the solid ones. In other words, any pattern that is not a solid pattern does not show up. I tried comparing all of the Hatch System Variables between 2012 and 2014, but still get the same thing.
where I can download standard USGS hatch patterns for identifying differnet strata in geologic columns. I know the USGS has standard patterns for specific strata and I was looking for a .pat file that has them all in it.
