Recently switched from AutoCAD 2006 to AutoCAD 2012, I have hatch patterns set up for different area, with scale, layer, etc., when inserted using the Tool Palette. Never had an issue with it, but in 2012 it doesn't seem to work. Instead of inserting the hatch with the layer specified in the tool palette, it assigns the hatch pattern whatever layer was used when hatching a previous area, using the hatch dialog box.
I have a little problem, here at work we want to work with tool palettes, but when we select a hatch from the tool palette and want to hatch a object it says to specify insertion point.
We at work here we are drawing with polylines so we would like to select the object instead of specifying a insertion point. How can we change it in the toolpalette ?
I have been using AutoCAD Civil 3D lately but went to use my AutoCAD 2011 I noticed I have no hatch patterns. I thought that these patterns were located in the support folder so I got my DVD that has the program on it out and was going to reload AutoCAD to fix the problem. It would not reload it so I copied the support folder to my computer in the AutoCAD file and still nothing. What can I do to get my hatch patterns back?
I opened a drawing that I had not opened in over a month originally created in AutCAD 2011, and now using 2012. It appears only some of the hatch patterns that I created are now duplicated, and in some cases up to 17 times! When I select the pattern it doesn't show that there are multiple hatches underneath, but when selected it shows in the properties box All(2) or more. One of my patterns was scaled down and rotated 90 degrees and because when I select it it's showing 10 entities selected I cannot scale it back or rotate it without deleting and re-hatching. The .dwg is pretty complex so doing this for every hatch that shows multiple would be very tedious.
I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
recently installed Acad R2010 and I need to install new custom hatches but don't know how.... I got working with Autocad since 1990; probably it was R2.0. This is the first time that I try to do it, so I don´t want to mess the whole thing misplacing my .pat files.
I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.
A work mate here at sometime or another clicked on the "always perform my current choice" check box when the "Hatch - Large, Dense Hatch Patterns" dialogue box appeared.
Question is, is there anyway to reset this so the dialogue box comes back up?
I have updated the drawing file with the paper templates which has the paper sizes as blocks. I have deleted the Paper template palette and gone via the design center to create the updated tool palette which should have the updated paper template blocks. For some reason it is still inserting the old blocks even though the new source file has the amended details.
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
I need to insert the same block from a tool palette multiple times into my drawing. Is there a way to do this without having to pick the block from the tool palette every time I want to insert it?
So I am trying to create a TP that has a few commands on it... the problem is I dont know where to start in order to make everything available to the others on my network...
I have created a new GROUP, dragged a palette into that group, made my commands, and they work on my PC... but how do I get them all so everone can see them. Exporting the "command tool samples" and importing it as "My layers" works, but the name is still command tool samples and breaks the actual command tool samples...
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
When I add the hatch pattern to the tool palette and then try to use it, it defaults the boundaries add command to pick points. Is there a way i can have it default to select objects?
I am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
I have two, seemingly identical, installations of AutoCAD LT 2012 on two machines in our office. Both machines have the MEASUREMENT variable set to 1.
The acadltiso.pat file of both machines has been customized with the addition of two hatch patterns and both of these work just fine.
In addition, the support folders of both installation also have identical sets of custom hatch patterns. On one of these machines thumbnails for these are visible and all works entirely as expected. However, on the other machine, none of these custom hatch patterns appear at all. In fact I cannot even see the custom hatch pattern tab!
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
I am trying to load hatch files from StoneCAD. In the past I have been able to take hatch patterns from various sources and locate them in a file within AutoCAD LT, then use them without issue.
I have never touched a .pat file or written anything in notepad or word, just simply copied the .dxf files to a file on my computer and was able to use them through AutoCAD LT 2009. Recently I had to reload the software and I can't figure out where I would go to put these hatch files.
I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?