I am unable to change the size of an image or text box. It allows me to click on the image or text box but does not allow me to change the size of it with the mouse. I can change it by right clicking on scale and entering in details but I am not able to change it manually.
View 2 RepliesI have a task I need to perform often. I create charts that have descriptive texts below bars. There are two lines of text... a company name, then data on the second line. The text is at a slant, so each bar has its own separate text (i.e., I can't create it as one continues piece of text... but the text below each bar —the two lines— are connected). I want the first line of text to be 8 points and 100% black. The second line of text is to be 7 points and 50% black. So let's say the text is 8 pt Arial. I highlight the second line and run the action on it to reduce it down to 7 points. No problem. Then I run a second action (ideally, I'd like to combine actions, but I can't as you'll see in a moment...) which turns that second line to 50% black. BUT... it turns BOTH lines to gray... not just the line I have highlighted. How can I stop it from doing this? It seems like if I have only certain text highlighted, it should only apply changes to that particulat text! Not ALL of it.
I'd like to combine both actions so that all I have to do is highlight the second line and run both actions. But I can't do that at the moment
I'll attach some photos that will hopefully make this make more sense.
I'm using CS6 on a Mac. The charts are initially generated online, if that makes a difference.
I am a fairly novice user of Illustrator. I have my company logo in an .AI and .PNG format. I need to "shrink" the image while perserving the image quality. I am trying to design an ad for my business and the file is too big for the dimensions of the ad in photoshop. When i attempt to reduce the file size (Edit--> Free Transform) I am able to "shrink" the logo down to fit (about 70% reduction), but it turns out very blurry and not sharp. The sharpen filter does not seem to work.
I have been told I need to take the .AI file, and shink the logo there, then converting to a PNG to be placed into the ad. I **think** I did this, but the image still turns out blurry.
I have a simple illustrator document with some text on it. The text is green. I wish to add additional text to the document in the exact shade of green that the current text is in. Believe it or not, I can't figure out how to do this. I can select the text I want to to be green and select a colour from the swatches menu, but the shades of green available there are not the exact shade of green that I need. I tried selecting my newly written text, click the eye dropper tool, and then clicked on my old text (which is in the shade of green that I want) but this frustratingly changes the font of my newly written text to the same font as the original text, without changing it's colour.
View 16 Replies View RelatedEvery new document seems to open with a default text size of 12 pt. (or 0.167 inches). I am a sign maker and my typical artboard size is often 120" x 120" or larger.
Is there a way to change the default text size so that new documents open with a text size of, say, 1 inch (or 3 inches, etc)?
I am working in Illustrator CS4 and I am currently having a problem resizing text boxes to either enlarge them to add more type or reduce them to eliminate unused space within the active box. When I place the cursor on the corner of an active box, I get a square symbol instead of an arrow which would indicate that I can change size. All I can do with the cursor now is move the position of an active box.
View 6 Replies View RelatedIs there a way to change the size of the text that comes out with the printers marks?
View 1 Replies View RelatedUsing CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
I create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View RelatedIn the Autodesk Inventor drawing (.idw) I am unable to change the font size when i dimension a hole and thread. I have tried going into "Edit Hole Note" and "Text" when you right click on the dimension.
View 3 Replies View RelatedI need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
I am creating a layered marine chart with reference points. I've imported the chart and am creating text layers with a reference number in them.
I have about 700 of these to add - a daunting task - but it's for a NZ coastguard unit, so is worthwhile.
The idea is to have a layer with all our reference points on it, so when a chart is updated, we can just import the chart; add back the reference points layers and print it out.
(Why? NZ baynames, danger spots etc usually have 2 names; an english name and a maori name - sometimes we have to cross reference when on the water to find the correct place).
Is creating text layers the best way of doing this?
Is there any way of increasing the size of all the text - instead of having to edit 700 text layers?
When transforming I am unable to increase size from original .image is stretched outside box but parts of image is outwith original size and is unseen.
View 3 Replies View RelatedI have created my own graphics from scratch with GIMP, but the resolution to this issue is eluding me.
I imported a GIF map and want to add red labels. I have no problem adding the labels, but I cannot seem to get the text colored red. Before I create the text layer, the text tool shows the color is red, but it still creates it black. All of the suggestions I've seen (yes, I've read the fine manual) reference the same things, including dragging the color from the foreground color (which I've also changed to red). Nothing I've tried seems to work. I've even saved the image as an XCF, but I have the same problem.
I want to print an image using an online service and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
View 3 Replies View RelatedI have PS CS4- never had this problem-today I can not change the size of an image- it indicates it is changed- but when I forwarded it to another site-it was not changed- I checked for updates and i turned the computer off and on- nothing worked
View 2 Replies View RelatedI'm trying to adjust the size of a specific image after the initial placement. I have tried "image size" and adjusted either by pixel size or percentage- but each time I do this it just adjusts the size of my entire canvas- not the individual photo I'm trying to adjust.
View 3 Replies View RelatedI want to change the size of a image for instance image size 6"x4" I would like to change this to 3"x3" or 4"x4" without distorting the image. It is easy to do this in paint.net
View 5 Replies View RelatedI cannot change the leader text position to be aligned next to the leader line, the text is positioned offset from the line, how do I correct this .
See attached image.
I have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
View 3 Replies View RelatedI am working on a banner for my Youtube channel, and I want the text to fill the safe text area needed for the banner. Thing is, I don't know how to change the pixel dimensions of a text box.
View 3 Replies View RelatedI am having issues with text size when I attempt to change the text size in MTEXT. It is set to copy the last size I used but when I need to edit the size, it multiplies what I enter by 8 and turns inches into feet. In other words, I try to resize 6" to 3". The text editor will then multiply 3" x 8 and size the text to 24 feet.
View 9 Replies View RelatedI have one layout (see attachment) if I will print this layout on A2 paper its text size is clear but, problem is that I need to add more level points so result there is no more place to put more data(levels) so i want to reduced this all text with block in small size then i will get more space to put new additional levels how can i reduced size if i will go one by one it will take time after redce i will print on A1
View 6 Replies View RelatedWhenever I try to dimension a drawing in model space the text of the dimension comes out unreadably small.
I go into dimension style manager, I click on modify and I click on the text tab but the text height and fraction height scale is greyed out!
If I click on "new" dimension style the only option I get is to base it off my current dimension style with the text size greyed out again.
How to change the text size of dimensions if at the option is greyed out?
I open an older document from an unknown source. A warning pops up that I have no substitute for the font, which is Helvetica90ms-RKSJ-H. I go to the "change font" window but am unable to substitute this font for the one on my system, which is Adobe Helvetica. If I try change the character style options default, it defaults right back to Helvetica90ms-RKSJ-H. If I manually change each bit of text (there are dozens in each document, and 200 documents), then copy/paste the fonts into a new document, the new document becomes corrupted and I can no longer choose the font on my system (Adobe Helvetica).
I have even tried an interim method of copy/pasting, by copying to the Windows notepad. That should lose any and all formatting. But when I copy it back to the Illustrator document, it becomes corrupted with Helvetica90ms-RKSJ-H.
I have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
I am creating a carpet tile family that is sized at 18"x36". When I load the image from the manufacture into the material I give it the 18"x36" size, but get something different in the family and project. See image attached.
I want the red lines to be at the bottom of the family.
I tried to change the material image size to 36x36" and it only scales in the y direction. I also tried to offset the image so it fills the family area and that doesn't seem to work either.
Im using Photoshop CS5. This being the 12th version of Photoshop. I still cant find a reason why they have not put the adjustments for keyboard increments in text or leading like In design and Illustrator has. I mean, Photoshop engineers have concluded for themselves that all designers in the world increase or decrease typography in 2 pts?
View 4 Replies View RelatedHow do I change the text size of the main menu bar? It seems you can change the text size for panels and other things but not the menu bar.
View 1 Replies View RelatedI want to select my text and change the size from my macro. As of now if i preselect the size it outputs the size once i type the text in box and add to page, but i cannot change the size by selecting the text. Im building this off of my output settings.
Sub ChangeSize ()Dim OriginalSelection as S,
text as StringDim txtShape as ShapeOn Error Resume NextOriginalSelection = (ComboFontSize.text, "pt", "")size = CInt(text)Set textShape = ActiveLayer.CreateArtisticText(ActiveLayer.Page.CenterX, 8, FontText.text,
cdrLanguageNone,
cdrCharSetMixed, Me.lstFonts.text, size)
End Sub
I go into a viewport and try to change text size from say 1000mm to 600mm but when I enter the text becomes HUGE as if it is in paper space.
I can get around it by scaling the text, but why it happens?