I go into a viewport and try to change text size from say 1000mm to 600mm but when I enter the text becomes HUGE as if it is in paper space.
I can get around it by scaling the text, but why it happens?
I create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View RelatedI am having issues with text size when I attempt to change the text size in MTEXT. It is set to copy the last size I used but when I need to edit the size, it multiplies what I enter by 8 and turns inches into feet. In other words, I try to resize 6" to 3". The text editor will then multiply 3" x 8 and size the text to 24 feet.
View 9 Replies View RelatedI have one layout (see attachment) if I will print this layout on A2 paper its text size is clear but, problem is that I need to add more level points so result there is no more place to put more data(levels) so i want to reduced this all text with block in small size then i will get more space to put new additional levels how can i reduced size if i will go one by one it will take time after redce i will print on A1
View 6 Replies View RelatedWhenever I try to dimension a drawing in model space the text of the dimension comes out unreadably small.
I go into dimension style manager, I click on modify and I click on the text tab but the text height and fraction height scale is greyed out!
If I click on "new" dimension style the only option I get is to base it off my current dimension style with the text size greyed out again.
How to change the text size of dimensions if at the option is greyed out?
I am trying to dimension a drawing and have tried everything under the sun to change the text size but despite everything it keeps producing the text at a tiny size .
View 3 Replies View RelatedI am creating a layered marine chart with reference points. I've imported the chart and am creating text layers with a reference number in them.
I have about 700 of these to add - a daunting task - but it's for a NZ coastguard unit, so is worthwhile.
The idea is to have a layer with all our reference points on it, so when a chart is updated, we can just import the chart; add back the reference points layers and print it out.
(Why? NZ baynames, danger spots etc usually have 2 names; an english name and a maori name - sometimes we have to cross reference when on the water to find the correct place).
Is creating text layers the best way of doing this?
Is there any way of increasing the size of all the text - instead of having to edit 700 text layers?
I used the BEDIT command (editor) on my block to modify the text size then save the block editor changes. Then use ATTSYNC to perform the changes on all existing blocks references to resize the texts, but after i complete the ATTSYNC command, the text in all the blocks disappear.
View 2 Replies View RelatedI have tried to change the size of the text in the title block and in other places within a drawing, but the changes are ignored. They always come back to Tahoma 0.120"
Is this a bug in the program?
Inventor 2013 with the latest service packs, etc.
I really need to make some changes to the title block and making the text smaller is one of them.
My current company have funny setting. It is time consuming task to manually open dialog box to change the setting for old drawings. May I know any command that I can use, so that I can copy and paste those command in the command window to change the properties.
View 6 Replies View RelatedI decided to use Data Link Tables for my Excel sheet instead of OLELinks. The appearance is far sharper, and I am also pleased there is no background color transfered. What IS the problem is when I update the table, its goes from 12" Wide by 12" Tall table @ 7/16" Text W/O borders back to 3" Wide by 10" Tall with varying text size to fit and gains back all borders except diagonals (of which none are present on the Excel file).
So, any way to default the format when I refresh so that it holds each cell at the 6"X1" dimensions with no border.
With that, If there is a way to have a stencil for making the range links with Excel, that would be useful. I use the exact same 4 or 6 ranges (2 formats) in every dwg.
This code works with no errors but does not change the text size. A user can over ride the text size (Font size) so I'm hoping it is possible thru code.
Dim oSketch As Inventor.Sketch
Set oSketch = oPartDoc.ComponentDefinition.Sketches("Sketch1")
Dim oText As Inventor.TextBox
Set oText = oSketch.TextBoxes.AddByRectangle(pnt1, pnt2)
oText.Style.FontSize = 0.1
I am working on a banner for my Youtube channel, and I want the text to fill the safe text area needed for the banner. Thing is, I don't know how to change the pixel dimensions of a text box.
View 3 Replies View RelatedEvery new document seems to open with a default text size of 12 pt. (or 0.167 inches). I am a sign maker and my typical artboard size is often 120" x 120" or larger.
Is there a way to change the default text size so that new documents open with a text size of, say, 1 inch (or 3 inches, etc)?
Im using Photoshop CS5. This being the 12th version of Photoshop. I still cant find a reason why they have not put the adjustments for keyboard increments in text or leading like In design and Illustrator has. I mean, Photoshop engineers have concluded for themselves that all designers in the world increase or decrease typography in 2 pts?
View 4 Replies View RelatedHow do I change the text size of the main menu bar? It seems you can change the text size for panels and other things but not the menu bar.
View 1 Replies View RelatedI want to select my text and change the size from my macro. As of now if i preselect the size it outputs the size once i type the text in box and add to page, but i cannot change the size by selecting the text. Im building this off of my output settings.
Sub ChangeSize ()Dim OriginalSelection as S,
text as StringDim txtShape as ShapeOn Error Resume NextOriginalSelection = (ComboFontSize.text, "pt", "")size = CInt(text)Set textShape = ActiveLayer.CreateArtisticText(ActiveLayer.Page.CenterX, 8, FontText.text,
cdrLanguageNone,
cdrCharSetMixed, Me.lstFonts.text, size)
End Sub
i want to make a TEXT ONLY LAYER.if i want change a font or size, just click a layer and change a font or size. like-photoshop.but, not same-photoshop. i think layer is make a ONLY ONE.
View 4 Replies View RelatedI am working in Illustrator CS4 and I am currently having a problem resizing text boxes to either enlarge them to add more type or reduce them to eliminate unused space within the active box. When I place the cursor on the corner of an active box, I get a square symbol instead of an arrow which would indicate that I can change size. All I can do with the cursor now is move the position of an active box.
View 6 Replies View RelatedIs there a way to change the size of the text that comes out with the printers marks?
View 1 Replies View RelatedI am unable to change the size of an image or text box. It allows me to click on the image or text box but does not allow me to change the size of it with the mouse. I can change it by right clicking on scale and entering in details but I am not able to change it manually.
View 2 Replies View RelatedHow can I change the default text size? I can set the size to 12 pt in three different places and choose "save settings as default", and when I place the text cursor on the page, it goes back to 24 pt. Very maddening...
View 5 Replies View RelatedI am facing the following problems while working on the navigation bars.
a) I am not able to create a new on of my own, I have to again and again drag and drift a navigation bar from the Designers Gallery, and right click and more buttons to it . What If I want to create a button of my own design ???
b) Even after selecting the navigation bar, I am not able to change the colour of the background as well as the text, am not able to change the font size of the text, the font type am also not able to change, even If I go the the menu style tab of the navigation properties tab. How do I change these specifications ?
I am using PSE12 with Mac OS X Mavericks. If I use the type tool, type some text then want to change maybe the font or size, the text disappears! If I set the parameters before typing everything is OK, but it is really inconvenient.
Also when I do a return in text the first letter of the next line is always a capital whether or not I start a new sentence!
The text tool will no longer display the box that allows you to change the text size or text color. (At the bottom left of screen) ELEMENTS 11.
View 2 Replies View RelatedI converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
this function is not functioning anymore. I may have done something to cause this but I don't recall.
Entering sizes in the text boxes does not change the object size anymore.
The only option right now is use the transform size docker...would rather not have to do that.
Also, would not like to hit F8...
Draw X5 sp2 (15.2.0.661)
I hate pressing F8 at startup!
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedMleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View Related
