i want to make a TEXT ONLY LAYER.if i want change a font or size, just click a layer and change a font or size. like-photoshop.but, not same-photoshop. i think layer is make a ONLY ONE.
View 4 RepliesI create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View RelatedI have a layer of lables for a drawing that all have 1" text, and I want to change all the text to 1.5", without having to scale them individually. There must be some way to select the layer and do a global adjustment of the text font?
I'm surprised I'm not finding this in the menu's, etc.Since I need each text to scale properly from it's own location, I cannot simply scale everything from one base point.
Using photoshop CS6 on Mac, I am seeing a problem with one of my batch processing sript who's only task is to apply an embossed water mark to images which I have resized such that the longest side is always 500px. (short side varies depending on how I have cropped).
In most cases, the piece of text I am adding to the image appears fine. But then for no apparent reason, it will suddenly apply the text (which I have set to 24pt) and it is way to big. To address the issue, I have to reduce the font size (via the actions pallate) down as far as 8 pt. Then it starts to appear more or less correctly (for a while) until maybe a few weeks later when I open up photoshop to run the job again and suddenly 8 pt font is WAY too small and I have to bump it up to 24 pt again.
I am facing the following problems while working on the navigation bars.
a) I am not able to create a new on of my own, I have to again and again drag and drift a navigation bar from the Designers Gallery, and right click and more buttons to it . What If I want to create a button of my own design ???
b) Even after selecting the navigation bar, I am not able to change the colour of the background as well as the text, am not able to change the font size of the text, the font type am also not able to change, even If I go the the menu style tab of the navigation properties tab. How do I change these specifications ?
I am using PSE12 with Mac OS X Mavericks. If I use the type tool, type some text then want to change maybe the font or size, the text disappears! If I set the parameters before typing everything is OK, but it is really inconvenient.
Also when I do a return in text the first letter of the next line is always a capital whether or not I start a new sentence!
In PSP 8, if I have many text entries within a single vector layer, all with same font size and type, is there a way to change the font size for all of them at once?
View 2 Replies View RelatedI have added 9pt vector text in multiple places of an image. Now I realize it should have been 8pt. I can add new text as 8pt but cant figure out how to change the point size of vector text that is already on the image. If I select a vector text object and then change the point size on the "Size" drop down menu at the top nothing happens. If I right click the vector object and select Edit Text I can change the actual text but not the font or its size. If I right-click the vector object and select Properties I can change stroke, fill, line style etc but this window does not include font or size. How do I change the font and point size for existing vector text objects?
View 3 Replies View RelatedI made orange letters in a font sized 142. But when I made a new layer and then made white letters to put on top of the orange ones--I also use font size 142, but it was smaller than the orange font. So I couldn't put it one top of the other letters for the 3-D look.
It's close, but not quite close enough to fit as it should. Do the differing colors make a difference in how the font of the same size is different? Or is it using different layers?
After installing the lightroom 4 on my new Imac 27', I found the font are too small to read. I can only change the font size of menu a little bigger and can't do anything about the other font size. I am so frustrated. The reason why I bought Imac 27" is to protect my weak vision and there are no means to change the font size in lightroom. I searched online and found many customers had this issue.
View 1 Replies View RelatedIs it possible to change the print font size. I have printed off the reader manual to assist me, but unfortunateley , as an 80 yr/old and with only one eye, I am finding the small font difficult to read and follow. It is not possible to change the printer font size, as I am informed by H P tech dept that it is controlled in the elements 12 programe
View 1 Replies View RelatedWhen I put orange gabriola font, 144 size, Bold effect on a canvas--and then try to make it 3-D by adding white. The white is smaller --not the same size as the orange--yet everything else is the same!
I tried measuring them together by putting the white behind the orange (it is smaller!) by going back to a file I'd resized before making the white (in case I did) --same thing. Made new layer, duplicate layer, put the active layer below, above..nothing would make them the same size!
Not that the actual letters are so badly different is size, but the spacing appears to be wider in the orange than in the white--which means that the white doesn't fit on the orange.
I need to get my manuscript published. And after all I've had to do to learn to get as far as I have, I sure don't feel like having to repeat if for one contrary white font!
I just downloaded paint and am giving it a whirl at my company. We're trying to move away from old programs we still somehow use. My question is if I have a piece of line artwork that's 7x 8.5, the standard font size we use is 12. Yet when I type it into the artwork, it looks like it's size 6 comparatively.
View 5 Replies View RelatedI've just gotten an ASUS Zenbook ultrabook, and I have to say that it runs PS (CS5) beautifully. Just one problem: with the 1920x1080 resolution, the menus, tools, etc. are tiny. Is there any way to change the size of the font in PS itself without changing the resolution on the whole computer?
View 5 Replies View Relatedchange the font size in the control dialogue boxes.......
View 2 Replies View RelatedCan the font size units be changed to point?
View 1 Replies View RelatedIn the Autodesk Inventor drawing (.idw) I am unable to change the font size when i dimension a hole and thread. I have tried going into "Edit Hole Note" and "Text" when you right click on the dimension.
View 3 Replies View Relatedhow can I change the font size on editor and organizer?
View 1 Replies View RelatedI cannot see Lightroom 4 - black background not good. Need larger font. Right now, useless to me. How to change background color and font size?
View 1 Replies View RelatedGimp 2.6.8 on Linux openSUSE 11.3
I need to extract text and font from a text layer. No problem, I thought, with gimp-text-layer-get-text and gimp-text-layer-get-font.
But I find that the original text layer was cropped withplug-in-autocrop-layer. Nevertheless Gimp lets me edit the text with the text edit tool - after a confirmation dialog.
But I can't get the text with script-fu. Is there a way to manage it? There are many files involved.
How can I change the UI-Font-Size of the Creative Cloud (CS6) programs? I'm working an an Dell u2711 with a 2560x1440 resolution on Windows 7 and the menus font size is 4pt or lower!
In Photoshop there is a menu in preferences>interface>ui font size and if I change it nothing happens, also if I restart Photoshop or the whole PC it just stays. The other programs doesn't even have an option like this?
I have a query. How do I change the color and font size of the RMC menu? I am using Autodesk Inventor 2012 Suite. I find it quite small and hard to see.
I have attached an image of it.
I find the default interface in CS6 difficult to read as the menu/tool labels seem very small to me. I can manipulate via Windows, but then the fonts in the windows of all my other apps are too big.
Is there a way to change the size of the fonts in labels in the user interface within Illustrator itself? I thought there used to be a way in preferences some where, but that was a long time ago - maybe even pre-CS?
How do I change the scale of a drawing in illustrator and have the font size staying the same size.
View 5 Replies View RelatedI need assistance. How doI change the font size or sizes of menu options on photoshop elements 9 so I can see to use the program, everything is so tiny, even the X's to close out the program.
View 2 Replies View RelatedThis has been a little annoying when trying to work on my edge animate projects. As I am using an old 4:3 ratio as my monitor - I don't have a lot of space on my desktop. Whenever I want to insert or edit code in Edge, the code menu pratically takes up my whole screen.
As you can see the font is still large even when it is on 'small' font size. Is there anywhere to change this or do I have to go digging manually into Edge's files?
Is there a way to change the font type and size of the Level within the schedule?
View 1 Replies View RelatedIs there a way to quickly change all text font in model space in autocad electrical 2009 rather than doing it manually for every text block?
View 6 Replies View Relatedhow to change font size for the drop down words on top and bottom in photo editor page -
View 1 Replies View RelatedNot sure if I have some option checked here I shouldn't. I am working on an image where I want an 8 pt font. When I use text tool > horizontal type tool > I make sure I have verdena size 8pt font checked. I have made an image with this font size before and it turned out fine. However, now when I use this font it is huge, looks like size 20 or something. It is at 100% so it should look a lot smaller. I also put the old image next to it and the font is a lot smaller then the new one. Any idea on what's going on?
View 2 Replies View RelatedPage No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........