Photoshop :: Pattern Along Path With Direction/Rotation?
Jun 20, 2007
where a tree is blocking vital building information. I would like to just stroke a selection of the outer arch here along this path. It seems I cannot make the selection into a pattern and stoke that, because it doesn't allow for rotation. So, i converted the selection into a brush, and put angle jitter to "direction" control. But it doesn't work like i would like it. It needs to be a solid stroke. I have spacing set to 1%. I am running CS2/windows. After it is finished i can adjust the color to match the original color.
View 1 Replies
ADVERTISEMENT
Jan 13, 2014
To summarize: It seems that compounding a path resets the rotation of the gradient to it's original degree of rotation.
Detailed version:
1. Create a shape.
2. Add a gradient fill. Note it's degree of rotation. Let's say it's set at 10°.
3. Now rotate the shape by any means (transform or rotate tool). Note the gradient degree of rotation has shifted the same amount as the shape was rotated (if it was rotated 50°, the gradient will show at 60°).
4. Make it a compound path.
5. Instantly the gradient shifts back to it's original degree of rotation of 10°.
It appears that when rotating a shape with a gradient, the rotation of the gradient is locked to the rotation of the shape. But when making it a compound shape it releases that lock and "remembers" it's original state. But that is only true as soon as you make it a compound path, but if you no go ahead and rotate it just a bit using the cursor (as opposed to selecting transform > rotate), the gradient will switch back to how you would expect it to rotate in the first place...
Workaround would be to make it a compound path before rotating the shape at all.
View 1 Replies
View Related
Sep 27, 2012
Photoshop and Flash consider the clockwise direction a positive rotation. Illustrator and InDesign consider it a negative rotation. Will this ever be consistent among Adobe applications?
[URL]...
View 9 Replies
View Related
Sep 4, 2010
I am animating a ball right now, that is rolling all over the place. Would be cool to animate just the translation of an object and not to worry about rotation. Is there a way? Like.. through the expressions or set driven key? Also would be even better if rotation speed increased as the movement speed did.
View 2 Replies
View Related
Dec 21, 2013
I made internal gears with design accelerator.
It's calculation is OK. And drag it,the rotation is good, But the direction is opposite. The tooth's move opposite direction to each other.
I used Autodesk Inventor 2013, And sp2, update DL22436649.zip But, this appeard before And after sp2 patch.
View 3 Replies
View Related
Mar 8, 2009
how to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies
View Related
Dec 7, 2011
I am trying to create a command to display the bend information in the model Flat pattern. We do not always create a Idw for parts that we have special dies to form. This creates a problem though if the flat pattern bends are the wrong direction because then it is lasered with the bad side of the material to the outside of the part. The only way to know the bend direction is to create a view on an idw just to check this.
I want to open the flat pattern in the ipt and invoke a command to display the bend information on the screen. Need getting a collection of the bend lines in the flat pattern?
View 7 Replies
View Related
Sep 10, 2012
Any work around for rectangular patterns in assemblies?
I want to pattern a screw using an existing Part Feature Pattern; I have figured out depending on how the part is assembled you get two outcomes and if the part is mated opposite side to how the feature was patterned you get the parts going the wrong way (see attached pic).
Is there a “flip direction” option anywhere or do you just have to be super diligent on how the seed feature orientation is in relation to the assembled pattern?
View 9 Replies
View Related
Nov 7, 2013
I would like the pattern to follow the rotation of the component when inserted onto the project. I can achieve it with model pattern but I would like to use drafting pattern because we need to show them on different scales.The diffuser family consists of a detail family in order to show the pattern. The pattern is already set to align with object and it still does not work.
View 3 Replies
View Related
Jul 28, 2013
I have written code for the user to select a point on the curve.I need to trace the point along the curve at certain intervals.How do i calculate the direction in which the point moves along the path.Im not using the GetPointOnCurve asit doesnt suit my requirement.
View 9 Replies
View Related
Jun 4, 2013
I need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.
View 8 Replies
View Related
Jan 11, 2013
I need to prepare a linked chain araound a defined path. (Please have a look at the attached drawing) My idea is to have one element of the chain defined as a dynamic block and to manually "rotate" one side of the chain element. After that inserting the next element (previously aligning the user coordinate system) and "rotating" the right part again to the next position...
After doing the rotation, the block definition will change and the next block will be "disformed". So far no big problem, but the grip of the rotation parameter will stay there and I am not able to "rotate" the right part back into the old position (0 degree).
View 4 Replies
View Related
May 17, 2013
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
View 2 Replies
View Related
Jan 2, 2014
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies
View Related
Mar 19, 2014
I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
View 17 Replies
View Related
Aug 1, 2012
s there a way to make patterns (repeat symbol) along paths? Something like using Artistic Media > Brush, but I'd like it to repeat symbol. It's possible and simple in illustrator, but in work I have to use Corel Draw.I need to make something like that: [URL] ..... can't use line style, because the pattern is too complex. Those symbols have to be smooth, so Foster's solution isn't that good...
View 10 Replies
View Related
Dec 28, 2013
How can i pattern a hole on a specific path?
please look at below picture : [URL] ........
I like to pattern a hole on along of the M shape path.
View 1 Replies
View Related
Feb 19, 2013
1.) The type "Mariners" sloping downward in an arc. I was able to get the Seattle part using type on a path on a circle and typing on top. Question is, can I also type Mariners on the bottom of that path? I recall that not being the case. Am I supposed to draw another circle over the one that Seattle is typed on and then on that one type on the bottom?
2.) For the stitching, am I supposed to create one stitch and then create a brush, draw a curve and then apply the brush to that curve?
View 3 Replies
View Related
Apr 21, 2011
I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies
View Related
Nov 20, 2012
I have some type converted to outlines, and it is in front/on top of a places raster pattern. when I select the type shapes and pattern and make a clipping mask, the pattern disappears and the letter shapes are filled with nothing!
Matters not whether the letter shapes are grouped or not...is there a way to have all of the letter shapes act as clipping mask together?
View 2 Replies
View Related
Dec 5, 2012
Trying to mask type with a vector pattern (place a vector pattern in a type clipping path), but nothing seems to be working. Never had issue before. Tried path in front, pattern in front, converting type path to compound path, converting vector to compound path. A couple of times it looked like it worked, but the pattern was invisible within the path. Illustrator CS6, on a Mac.
View 2 Replies
View Related
Jan 29, 2014
I have had this problem since I started using patterns. Basically when I put a pattern on a path I want to then move it along that path so it starts where I want it to start, not neccessarily on the path's starting point.
There is an image of how it looks like
I created a simple pattern to show my issue. For example I want to move this pattern along this circle so it looks like this (triangle points up)
As you can see I rotated the whole circle to get the right outcome I need, but if it was just a regular path I would not be able to fix it this way.
Is there a way to do that? Something like moving text along a path.
I am using Illustrator CC.
View 7 Replies
View Related
Mar 9, 2014
I've made a pattern brush that I'm using to simulate a woods line for a boardgame map:
Shown above is the unstroked bounding box as well. To use this brush, I draw an outline of a woods mass with the pencil tool, then apply the brush and Expand Appearance. At that point I'm hoping the brush sections will join into one closed path so that I can fill it with a woodsy green, but instead the fill gets applied to each section of brush independently:
The join points seem fine - it's not like the two ends of the brush don't line up at all: EDIT - Actually, that's not just one point in the middle there - that's the ends of both paths lying almost on top of each other. It's possible to separate the two and then ctrl-J join them. Problem is, I want that single path automatically.
So how to get Illustrator to treat the resulting path as one closed path instead of a compound path?
View 3 Replies
View Related
Jul 15, 2011
When setting up a simple FK control curve on say the wrist for example, many times the control curve isn't exactly perpendicular to the local rotation axis of the joint movement, so when we position the control curve to be perpendicular to the joint - it has a rotational value added, but the rotational handles are lines up with the rotational handles of the joint that we want to move.
Freeze Transformations: then the control curves rotational handle go back to being skewed (out of alignment with the joints)
We want to Freeze transformations before constraining the curve, but we'd really to keep those rotations control handles to remain aligned with the joints rotational handles. This will make it an exact control when animating - grab the rotational handle of the curve, rotate it, and the joint will move exactly in the proper direction.
how to get the rotational handle of any control curve to run perpendicular to the shape after freezing transformations?
View 3 Replies
View Related
Jul 27, 2012
I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
View 9 Replies
View Related
Sep 21, 2011
I want to rotate a drawing in my paper space, but without rotating it in model space. So that I still can work on it easily in model space.
View 9 Replies
View Related
May 15, 2007
I have a North Arrow that I would love to make into a dynamic block. I would like to be able to rotate the N that represents where the north direction is. But while rotating the N around the center of a circle I would like the letter itself to stay un-rotated. It seems simple, if I rotate the letter around the axis of a circle 90 deg, I would like the letter itself to rotate -90 deg on it's own axis. Of course this is easy to do manualy, but how do i do it so that rotation 1 automaticaly triggers rotation 2?
View 9 Replies
View Related
Dec 13, 2012
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
View 2 Replies
View Related
Sep 3, 2013
The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies
View Related
Sep 18, 2012
I have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies
View Related
May 25, 2012
where could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies
View Related
