Illustrator :: Type On A Path And Pattern Brush
Feb 19, 2013
1.) The type "Mariners" sloping downward in an arc. I was able to get the Seattle part using type on a path on a circle and typing on top. Question is, can I also type Mariners on the bottom of that path? I recall that not being the case. Am I supposed to draw another circle over the one that Seattle is typed on and then on that one type on the bottom?
2.) For the stitching, am I supposed to create one stitch and then create a brush, draw a curve and then apply the brush to that curve?
View 3 Replies
ADVERTISEMENT
Dec 5, 2012
Trying to mask type with a vector pattern (place a vector pattern in a type clipping path), but nothing seems to be working. Never had issue before. Tried path in front, pattern in front, converting type path to compound path, converting vector to compound path. A couple of times it looked like it worked, but the pattern was invisible within the path. Illustrator CS6, on a Mac.
View 2 Replies
View Related
Mar 9, 2014
I've made a pattern brush that I'm using to simulate a woods line for a boardgame map:
Shown above is the unstroked bounding box as well. To use this brush, I draw an outline of a woods mass with the pencil tool, then apply the brush and Expand Appearance. At that point I'm hoping the brush sections will join into one closed path so that I can fill it with a woodsy green, but instead the fill gets applied to each section of brush independently:
The join points seem fine - it's not like the two ends of the brush don't line up at all: EDIT - Actually, that's not just one point in the middle there - that's the ends of both paths lying almost on top of each other. It's possible to separate the two and then ctrl-J join them. Problem is, I want that single path automatically.
So how to get Illustrator to treat the resulting path as one closed path instead of a compound path?
View 3 Replies
View Related
Apr 29, 2013
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies
View Related
May 11, 2012
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
View 6 Replies
View Related
Oct 3, 2012
Once you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies
View Related
Feb 13, 2014
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies
View Related
Jan 24, 2013
Replacing the art in pattern and art brush is simple. [Alt/opt]-drag the new art over the existing brush and apply. When I do this on a scatter brush, I'm presented with the expected dialog and a preview of the updated art thumbnail, but no change takes place with I click OK. It's happens on three different computers I've tried. Is this feature broken?
Win7 64-bit
CS 6
View 3 Replies
View Related
Feb 25, 2014
I have created a pattern brush and applied it to a stroke. My question is: Can I now taper the pattern brush once applied to the stroke?
View 3 Replies
View Related
Jun 9, 2013
I have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies
View Related
Mar 5, 2013
I traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
View 1 Replies
View Related
Dec 1, 2012
I'm exploring custom brushes in Illustrator (CS6) but cannot figure out how to get rid of the spaces in between my brush pattern. I have the brush stretched to fit and the spacing at 0% but there is still a tiny gap before each pattern repetition. I tried to make the spacing a negative % but you can't do that.
View 22 Replies
View Related
Aug 20, 2013
I try to create a patternbrush using an image. Image is created in PS and lines up nice horizontaly. Droping it into Illustrator. From there I drag and drop it onto the brush panel and create a patterbrush. I also include an empty rectangle to control the spacing ( suggested elsewhere ? ). If I apply that brush to a curved path there are always little gaps between the segments. How can I construct the brush without the gaps? There is a denimseam brush within Illustrator that does exactly what I try to achieve except I can not.
View 9 Replies
View Related
Feb 26, 2014
My patter brush scale options are grayed out. When the same files are opened by other co workers on their pc's the pattern scale options are available. We have tried everything. We have Illustrator CS6
View 6 Replies
View Related
Nov 2, 2012
I followed this tutorial to create 3D Christmas lights, and all was going well until I reached one of the final steps- release clipping mask in order to proceed with making a pattern brush. The "Release" option is simply not available, I'm only allowed to "Make."
My questions:
- What might have I missed/what should I look for to enable making a pattern brush with 3d objects?
View 4 Replies
View Related
May 2, 2013
I am trying to create a seamless pattern brush in CS6 .When I use the no fill/no stroke bounding box placed behind the object to define the repeat, instead of cropping the object for the brush, it overlaps it. Here is an example:
When I do this in CS5- the bounding box works fine and crops out the space outside. Was there an update in CS6?
View 2 Replies
View Related
Dec 14, 2013
I want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
View 2 Replies
View Related
Sep 18, 2013
I'm working with a typeface that I need to stretch horizontally while following a circular shape. I don't want to distort it other than the horizontal stretching.
View 2 Replies
View Related
Oct 1, 2012
I have a created a spiral path and added type to it. This spiral circles a planet-like object. This object is not completely circular, therefore overlaps some of the spiral. I would like the type on the spiral to wrap these protrusions. And I have tried the usual way of applying a text wrap (object > text wrap > make). The type on path doesn't seem to recognize the text wrap.
View 3 Replies
View Related
Nov 20, 2012
I have some type converted to outlines, and it is in front/on top of a places raster pattern. when I select the type shapes and pattern and make a clipping mask, the pattern disappears and the letter shapes are filled with nothing!
Matters not whether the letter shapes are grouped or not...is there a way to have all of the letter shapes act as clipping mask together?
View 2 Replies
View Related
Jan 29, 2014
I have had this problem since I started using patterns. Basically when I put a pattern on a path I want to then move it along that path so it starts where I want it to start, not neccessarily on the path's starting point.
There is an image of how it looks like
I created a simple pattern to show my issue. For example I want to move this pattern along this circle so it looks like this (triangle points up)
As you can see I rotated the whole circle to get the right outcome I need, but if it was just a regular path I would not be able to fix it this way.
Is there a way to do that? Something like moving text along a path.
I am using Illustrator CC.
View 7 Replies
View Related
Sep 8, 2012
I'm using Illustrator CS4. I am unable to Create Outlines for a font after I had used the type on the Path Tool. I had used the ellipse tool to create a closed circular path, then I selected the Type on a Path tool. I selected my text using the arrow tool and ctrl-shift-o (Create outlines) and then I receive the message: "Can't Create type outlines." Not quite sure why this is happening. Did I miss something? The thing is this - my type is in the position and alignment that I want and I don't necessarily want to work with the Type as a Font but as vector shapes.
View 3 Replies
View Related
Jun 4, 2013
I need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.
View 8 Replies
View Related
Mar 27, 2013
Is there a way to disable this function?
I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text.
I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical.
Any way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?
View 4 Replies
View Related
Nov 1, 2013
Upgraded to Illustrator CS6 and as I paint with the brush, it only shows the path while drawing until I release my Wacom pen. I want to see the shape of my line as I'm painting it.
View 1 Replies
View Related
Dec 9, 2013
I've got a little problem with making a nice path with pre-made brush. I just uploaded image to IL and made a brush based on it. Works great, but there are rounded joints on connections. Is there is some way to get rid of those rounded joints and make it straight, like nice continuous line?
View 3 Replies
View Related
Aug 26, 2012
Mac ox lion
cs5
I have a crown I'm working on and I applied grunge brushes to the diamonds and shines. I would like to remove the grunge and keep the lines as they were before, smooth and clean. Is there an option or quick fix to do this? I created these diamonds and shines a long long time ago or I would just cmd+z. I have not expanded the paths, I have kept them them the same .25 stroke and no fill
View 2 Replies
View Related
Oct 13, 2013
When drawing a path with the brush tool and then placing the brush back over an anchor point to continue the path, sometimes it continues the path and sometimes it deletes the path and just starts a new one. Why does it sometimes add to the existing path and sometimes start a new one?
View 1 Replies
View Related
Jan 15, 2013
Its a simple problem. I hope I'm missing some easy option, but no matter how I change the options in the brush dialogue, the brush always has the same orientation to the origin path. See the image below:
The brush is rather large and complex, but I've never seen this happen before. No matter which of the direction buttons are pressed, the brush remains the same. Is there another way to change the orientation with respect to the path?
View 4 Replies
View Related
Feb 11, 2014
I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
View 2 Replies
View Related
Dec 26, 2013
It seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies
View Related
