I followed this tutorial to create 3D Christmas lights, and all was going well until I reached one of the final steps- release clipping mask in order to proceed with making a pattern brush. The "Release" option is simply not available, I'm only allowed to "Make."
My questions:
- What might have I missed/what should I look for to enable making a pattern brush with 3d objects?
I've made a pattern brush that I'm using to simulate a woods line for a boardgame map:
Shown above is the unstroked bounding box as well. To use this brush, I draw an outline of a woods mass with the pencil tool, then apply the brush and Expand Appearance. At that point I'm hoping the brush sections will join into one closed path so that I can fill it with a woodsy green, but instead the fill gets applied to each section of brush independently:
The join points seem fine - it's not like the two ends of the brush don't line up at all: EDIT - Actually, that's not just one point in the middle there - that's the ends of both paths lying almost on top of each other. It's possible to separate the two and then ctrl-J join them. Problem is, I want that single path automatically.
So how to get Illustrator to treat the resulting path as one closed path instead of a compound path?
Replacing the art in pattern and art brush is simple. [Alt/opt]-drag the new art over the existing brush and apply. When I do this on a scatter brush, I'm presented with the expected dialog and a preview of the updated art thumbnail, but no change takes place with I click OK. It's happens on three different computers I've tried. Is this feature broken?
Win7 64-bit
CS 6
I have created a pattern brush and applied it to a stroke. My question is: Can I now taper the pattern brush once applied to the stroke?
View 3 Replies View Related1.) The type "Mariners" sloping downward in an arc. I was able to get the Seattle part using type on a path on a circle and typing on top. Question is, can I also type Mariners on the bottom of that path? I recall that not being the case. Am I supposed to draw another circle over the one that Seattle is typed on and then on that one type on the bottom?
2.) For the stitching, am I supposed to create one stitch and then create a brush, draw a curve and then apply the brush to that curve?
I traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
I'm exploring custom brushes in Illustrator (CS6) but cannot figure out how to get rid of the spaces in between my brush pattern. I have the brush stretched to fit and the spacing at 0% but there is still a tiny gap before each pattern repetition. I tried to make the spacing a negative % but you can't do that.
View 22 Replies View RelatedI try to create a patternbrush using an image. Image is created in PS and lines up nice horizontaly. Droping it into Illustrator. From there I drag and drop it onto the brush panel and create a patterbrush. I also include an empty rectangle to control the spacing ( suggested elsewhere ? ). If I apply that brush to a curved path there are always little gaps between the segments. How can I construct the brush without the gaps? There is a denimseam brush within Illustrator that does exactly what I try to achieve except I can not.
View 9 Replies View RelatedMy patter brush scale options are grayed out. When the same files are opened by other co workers on their pc's the pattern scale options are available. We have tried everything. We have Illustrator CS6
View 6 Replies View RelatedI am trying to create a seamless pattern brush in CS6 .When I use the no fill/no stroke bounding box placed behind the object to define the repeat, instead of cropping the object for the brush, it overlaps it. Here is an example:
When I do this in CS5- the bounding box works fine and crops out the space outside. Was there an update in CS6?
I have a rectangular component pattern which started out with all components. As more structure was added around it I started supressing different elements to suit, now a piece of structure has gone thru element 1 but i dont seem to be able to supress it... is there an easy way to get rid of element 1 without having to redefine the pattern? (redefining causes me other problems)
View 4 Replies View RelatedI need to be able to suppress individual elements of a circular pattern so I can retain the angular orientation while being able to reduce the number of instances. I have found how to suppress the entire circular pattern, but can't seem to get the right terminology to access the elements one at a time.
The code I have to suppress the entire pattern is Feature.InventorFeature("Circular Pattern").Suppressed = True.
I'm trying to use ilogic to suppress some individual elements of a pattern but i couldn't find any command that can target component pattern elements. When i try to capture its current state with the right click menu it does nothing.
I can of course suppress the part within the element but then it doesn't update the BOM.
how to make a pattern in illustrator from a placed image ?
View 1 Replies View RelatedI am not so familiar with illustrator so how to make more effectively and fast. I have got designed pattern with pen tool. And now I would like to add two different "relief" pattern to it- you can see it on my picture- the red one. How to do that?
1. adapt shapes to background grey shape of flower?
2. keep same direction of each pattern- line?
3. keep same distance from each other?
How to do that? is it there some way?
I really want to make a small honeycomb swatch pattern (the polygons should be small - 2 px x 2px) , but I just cannot get it to work. What I did is make one small polygon, and went to: Object>pattern>make and applied the following settings:
You will see that on the shoulder of the t-shirt, the pattern is kinda trasparent - the bottom layer is visible-I don't want it to be.The bottom pattern(on the side of the t-shirt) you will see came out fine, except that the polygons are too big and I cannot get it any smaller.
I am trying to make a hatch pattern in Illustrator CS6 with the pattern tool so I can apply a clean, single lined hatch to various shapes (some small some big - but the hatch needs to remain at the same seamless scale). I understand that there is a Basic Graphics_Lines Pattern under the Swatches Palette, but I don't understand how to edit it with the Pattern Options dialogue box.
I must be missing something, because I wouldn't think making a single line at 45° repeat at the same spacing for a shape fill would be that difficult. I shouldn't have to make a line with the pan tool at a stroke of 1000 with a 0.1-3 dash and make a clipping mask should I?
Basically I don't know how to make a pattern's lines match up when I do the 5x5 or 3x3. I tried doing 1x1 and the result is that of the image with the red stroke...still not aligning. Do I need to get mathematical with the size of the line I'm drawing and its stroke to allow H and V Spacing to work?
Im making a logo for a client and am having a nightmare of a time trying to properly use the clipping masks in illustrator CS5. I copied and pasted the logo I made behind itself with a different color just for a drop shadow-like effect. And now I'm trying to apply this diagonal line pattern I created over top the "shadow" I made to give it some texture.
Here's an example of what I'm going for, only imagine the line pattern on the text instead of banner.
I am using Ai Cs6. I am trying to make a new calligraphic brush. The graphic I wish to create the brush for is highlighted on my screen, and I clicked on the New Brush icon in the Brush Menu. After changing the angle, roundness and size, the only options are "fixed and random". All other options are greyed out. How do I access the "tilt" feature for example?
View 5 Replies View RelatedAnyway, I would like to use the Basic brush at half a pixel stroke and less like 0.25
However, when I type in 0.5 and then go to use the brush it just turns back to 1px
So, should I assume I cannot make a stroke smaller than 1px?
We have some patterns that our customers can choose from to put sandblast film on their windows. Not sure about the english term for it, but this is what i mean:
We are looking for a flexible way to make the vector file from a predefined pattern.
Like the example below, when resizing the outer rectangle (= the window), the number of squares should be adjusted automatically. And the squares need to be centered in the window all the time.
I'm not such an expert in using patterns in illustrator, but i believe there is no way to define settings that control the pattern i believe? Like pattern brushes in illustrator, in which settings can be set like scale the pattern or scale the space inbetween, center the pattern,...
The square pattern below is just an example, see some other examples that i would like to easily control the thickness of lines, number of circles, space between stripes, horizontal and vertical scale of the pattern,...
I'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers.This is what I did after creating the artwork:
Used the rectangle tool to make a box with fill/stroke directly on top of the artboard.. Select all > Expand (selecting stroke only, not fill) Deselect the cropping box and grouped the remaining objects. Reselected the cropping box and grouped all objects Pathfinder > Crop I'm guessing it may have something to do with the fact I used a gradient on the flowers but how to resolve it.
I have a fabulous image of a painter's palette: [URL]
I want to show only parts of this image at a time, so that the viewer sees it in increments. However, I want to make the edges look more organic, like brush strokes, so that it looks almost as though the painting is being completed and the viewer gets to see the process.
p.s. I'm in CS2, unfortunately, so the bristle brush isn't an options
I am looking to make a brush that I can use for cartooning in CS6 that starts out thin, gets thicker with pressure (I have a cintiq), and ends in a thin line.
View 22 Replies View RelatedPHOTOSHOP CS6 V.13.0.1 x64
MAC OSX 10.8.4
I’m Photoshop self-taught. Most of the work I do on Photoshop involves placing elements (objects, people, animals, etc.) into regular and stock photos. Down below is a list of the tools and filters I use to adjust the element(s) so they look like they are a real part of the picture.I can get real close. Real close. But I can’t quite bring it home. I feel there’s some tool(s) or trick(s) or filter(s) I’m not using. I can’t find anything online or in Photoshop books or manuals.
QUICK SELECT TOOL > REFINE EDGE
IMAGE > ADJUSTMENTS >
BRIGHTNESS/CONTRAST
LEVELS
[code]...
When i hide an element in a particular view by rt click .- hide element. It does hide ..How do make it visible when required?
View 7 Replies View RelatedIs there a way to make a custom vector brush smoothly meet at beginning and ending of the stroke, such as with a circle? I'm trying to create smooth circles with a brush and Wacom. I want a brush rather than a mathmatically perfect circle with a perfect stroke weight-thickness, but I don't like how the two beginning and ending join up. i like the slight variations of human imperfections one gets when using a vector brush, but there must be a way to make the joing points look more smooth, rather than an after-thought prgramming fault, right? Is it possible?
The image below shows my attempts to make as smooth a joint as possible, but it still looks too much like it wasn't meant-to-be.
I'm using Ai CS4, Mac OS10.8.4
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies View RelatedI'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
View 1 Replies View RelatedWith a RGB or CYMK no problem for me to have certain element in the picture distinguishing from the rest. But now I have to do the same building up in duotone (2 PMS colours). It looks like Photoshop doesn't allow to put a black&white layer into a duotone document (it automatically turns into the 2 duotone colours).
So how can i make a duotone image (source = FC) in which a part looks "black and white" (1 colour=black) and a part "lights up" in the second colour (2 colour= yellow)?
- so I know how to make a duotone image, that's not the problem
- i know how to work with layers and masks
(i try to upload the image.. but server seems very busy...)
I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View Related