I have a rectangular component pattern which started out with all components. As more structure was added around it I started supressing different elements to suit, now a piece of structure has gone thru element 1 but i dont seem to be able to supress it... is there an easy way to get rid of element 1 without having to redefine the pattern? (redefining causes me other problems)
View 4 RepliesI need to be able to suppress individual elements of a circular pattern so I can retain the angular orientation while being able to reduce the number of instances. I have found how to suppress the entire circular pattern, but can't seem to get the right terminology to access the elements one at a time.
The code I have to suppress the entire pattern is Feature.InventorFeature("Circular Pattern").Suppressed = True.
I'm trying to use ilogic to suppress some individual elements of a pattern but i couldn't find any command that can target component pattern elements. When i try to capture its current state with the right click menu it does nothing.
I can of course suppress the part within the element but then it doesn't update the BOM.
I often use multiple versions of components in my assemblies so I can validate the top level assy works in all it's expected configurations. To that end, if I have different versions of component A, I supress all except the version I am working with. I have discovered though, that supressing the component does not supress the contraints that component has to an unsupressed component in the assy.
The purpose of suppressing something is to essentially eliminate it from existance without deleting it from the file so it can be brought back quickly in all its glory.If I have to track down every contraint there is for a supressed component and supress them independently, that is an incredible consumption of time.
I was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
You are using an assembly with many LODs. Each time you place a component in your assembly , that one will be active in all level of Details.For some configurations, you would like one component to be active in only one LOD. Inc.
View 9 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
how to suppress a pattern in *.iam by ilogic?
I used ilogic to suppress the main components, but the rest are not suppressed.
For example, I have component "A" and make it a pattern (Colum and Row are variable). How to use ilogic to suppress rest not just "A".
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
How do you suppress a certain pattern occurence in Ilogic?
View 6 Replies View RelatedIf I have a RectangularPattern how do I suppress individual features in the pattern.
For example I have a single row of holes, and I want to suppress the odd numbered holes.
I've tried this...
CComPtr<FeaturePatternElements> pFeaturePatternElements ;
pRectPatFeat->get_PatternElements (&pFeaturePatternElements) ;
const int ikNumElements = pFeaturePatternElements->GetCount() ;
wprintf (L" this has %d FeaturePatternElements
[Code]....
... but it crashes at the assignment of Suppressed
Is it possible to suppress an occurrence of a pattern in part environment using iLogic? I saw something for assembly environment, but I can't make it work for part. My iLogic knowledge is quite basic.
View 1 Replies View RelatedI need to suppress a pattern in an 2nd level subassembly. But is only able to do it in the same level where the pattern is placed etc:
If Length < 3000 mm Then
Component.IsActive("1 st level subassembly", "Name of pattern in 1nd level subassembly") = False
End If
But if i do it with an MakePath... etc.:
If Length < 3000 mm Then
Component.IsActive(MakePath("1 st level subassembly", "2 nd level subassembly", "Name of pattern in 2nd level subassembly")) = False
End If
If Length < 3000 mm Then
Component.IsActive(MakePath("1 st level subassembly", "2 nd level subassembly"), "Name of pattern in 2nd level subassembly") = False
End If
is it not possible to suppress a pattern by an MakePath?
I have set iLogic to change a rectangular pattern to a certain amount of occurrences depending on which is selected , i.e. 117 cavities, 140 cavities and 96 cavities. Only one is active (or unsuppressed ) at a time.
What I need to do is suppress the 4 corners of each pattern, considering there's only one pattern and is dynamic.
I have a sheetmetal assembly with helical shaped parts. I need to place about 50 little brackets and some corresponding rollers along the length of these helical pieces. The spacing is even so a pattern would be perfect, except I don't know how to get it to follow the shape of the part. The brackets are located to slots in the helical parts which were made with a rectangular pattern in the unfolded state. I tried to do a "feature pattern select" but it only saw the rectangular pattern as it is in the unfolded state (a straight line). I then gave up on patterns and started working on manually mating them into place but realized that the geometry of the slot was distorted (theory) and didn't leave me with any useable surfaces.
View 9 Replies View RelatedI have a component pattern with 3 components in it and I need to remove one of the components from the pattern. How can I modify the pattern through the API? I have tried various things but I do not appear to be able to change the pattern.
View 1 Replies View RelatedIn an assembly, is there a way to pattern a component in the X, Y and Z directions? I need to make a certain number of components, and each instance changes by the same delta x y and z. The dialog box will only show me column and row options.
View 7 Replies View RelatedIs there a way to explode a Component Pattern? I would like to create a 12 x 12 Component Pattern in an IAM and then explode it so that I have 144 individual objects.
View 6 Replies View RelatedPattern component is great but sometimes I have to pattern the same part several times to different dimensions in the same direction. For example: I have a part that has to go the left 26', then again at 29" and then again at 37". Other than manuallly constraining this 3 different times I've had to Pattern Component the first one at 26", then change the 2nd one to Independent. Then Pattern component that one to the 29" dimension. Change that 2nd one to Independent and pattern component that one to 37". It saves a lot of time but if I have to increase the model they are going on I have to start all over. Is there a command or something that will do this? I understand that a pattern is equal lenghs so maybe I am looking at the wrong command for what I am needing to do.
View 2 Replies View RelatedI have a few components in my assembly that I want to turn off under certain conditions. Using Component.IsActive, I can turn on or off an instance, but some of the components are in a pattern, and I want to turn on or off all instances of the component. To add to the challenge, the component patters are driven from Excel, and the quantity of parts changes.How can I turn off all of the instances of a pattern?
View 1 Replies View RelatedHow to modify the code below to delete suppressed parts in a pattern (entire pattern)?
Dim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesoComps = ThisDoc.Document.ComponentDefinition.OccurrencesFor Each oComp In oCompsIf Component.IsActive(oComp.Name) = False Then oComp.DeleteNext
Code works fine if there are single instances of the part. It throws a error when you have a suppressed pattern.
my create a circular pattern in an assembly that maintains the orientation of the part being patterned.
This is for foundation plates. There are 3 plates. The plates are square, and have bolt holes in the corners of the plates. Since there are 3 plates and its going around a circle, the angle between the plates is 120 degrees.
Now, Ive been trying this for some time now and what is happening is the firs plate is fine, but then the second and third plate are rotated around their center axis. I would like it to simply remain as inserted and constrained within the assembly.
I have attached a picture to be more clear about what I want and what I'm currently getting.
I've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf.
[code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI followed this tutorial to create 3D Christmas lights, and all was going well until I reached one of the final steps- release clipping mask in order to proceed with making a pattern brush. The "Release" option is simply not available, I'm only allowed to "Make."
My questions:
- What might have I missed/what should I look for to enable making a pattern brush with 3d objects?
I have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
I would like the pattern to follow the rotation of the component when inserted onto the project. I can achieve it with model pattern but I would like to use drafting pattern because we need to show them on different scales.The diffuser family consists of a detail family in order to show the pattern. The pattern is already set to align with object and it still does not work.
View 3 Replies View RelatedA iLogic rule to suppress a sketch? When I suppress a feature, the sketch is not suppressed which cause an error. Although this kind of error does not hurt anything, but I do not want to see any error in my model.
How to suppress the sketch by a rule?
Can not find the table where you can input "suppress feature if this equals 0" and so...
View 1 Replies View RelatedIs there a way to put a bunch of imates under one line code?
I have imate iInsert:1 thru iInsert:49 I need them all suppressed when an event happens.
I can get it to work one by one but that would be a lot of code.
Tried a few other thing but seems not to work.
2012 Factory Design Suite ( will not load 2013)