How to modify the code below to delete suppressed parts in a pattern (entire pattern)?
Dim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesoComps = ThisDoc.Document.ComponentDefinition.OccurrencesFor Each oComp In oCompsIf Component.IsActive(oComp.Name) = False Then oComp.DeleteNext
Code works fine if there are single instances of the part. It throws a error when you have a suppressed pattern.
I have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
I have an assembly which includes lot of parts (*.ipt) or sub-assembly (*.iam). I have some ilogic rules to control to suppress or un suppress them.
Now for the released assembly, I want delete all suppressed components by ilogic rule.
I started with a huge ipart table which was created by a collegue who has now left. The factory was unmanageable as it had reached the maximum amount of columns and was running very slowly.
To combat this, I decided to split the table in half so that the ipart will become two iparts. I am now working on the first half...
A lot of features are unque to one or a few parts, so doing this enabled me to delete columns if all values in the columns matched after the table was halved.
I thought this would speed up the file but I have now realised I have a bunch of features sat in the browser than are suppressed in every member!
Is there any way to use ilogic or vba to run a script that will delete a feature if it is suppressed in every member?
Inventor 2013 Certified Professional
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
I have a iLogic assembly with some parts and sub assembly. I need to do a copy of this " Generator " to apply the result later in other assemblies. (something like a member of a ipart or i assembly).
Is there any way to do the copy the assembly to a new folder without the suppressed parts and subassemblies (wich are suppressed in the initial main assembly by iLogic rules)?
I tried to use "Pack and go" and "iLogic design copy", but they always bring the suppressed parts and assembly's, to the new folder and which i don't need to apply in the other assemblies.
Is there a way to work with parameters on a suppressed assembly using iLogic.Everything works fine, but when I suppressed a part ilogic rule give me an error: Parameter: The component named "xxxxx:1" was not found.
View 1 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
What I am trying to do is insert a part into an assembly file using iLogic. I basically want to mimic Inventor’s “Place” command using ilogic, maybe something like this:
oPath = ThisDoc.Path & ""
oFile = "File.ipt"
Component.Place(oPath & oFile, False)
I have a sheetmetal assembly with helical shaped parts. I need to place about 50 little brackets and some corresponding rollers along the length of these helical pieces. The spacing is even so a pattern would be perfect, except I don't know how to get it to follow the shape of the part. The brackets are located to slots in the helical parts which were made with a rectangular pattern in the unfolded state. I tried to do a "feature pattern select" but it only saw the rectangular pattern as it is in the unfolded state (a straight line). I then gave up on patterns and started working on manually mating them into place but realized that the geometry of the slot was distorted (theory) and didn't leave me with any useable surfaces.
View 9 Replies View RelatedI have a component pattern with 3 components in it and I need to remove one of the components from the pattern. How can I modify the pattern through the API? I have tried various things but I do not appear to be able to change the pattern.
View 1 Replies View RelatedIn an assembly, is there a way to pattern a component in the X, Y and Z directions? I need to make a certain number of components, and each instance changes by the same delta x y and z. The dialog box will only show me column and row options.
View 7 Replies View RelatedIs there a way to explode a Component Pattern? I would like to create a 12 x 12 Component Pattern in an IAM and then explode it so that I have 144 individual objects.
View 6 Replies View RelatedHow can I include component suppression in the idw views? I suppress a component in the ipt or asm, but it doesn't
disappear from the drawing views. Is there a way to carry this over to the drawing?
Is it possible to skip the small preview window and the parameters display when i place an iLogic component white the command Place iLogic Component.
View 1 Replies View RelatedI'm trying to play around with iLogic for creating dynamically dimensioned subassemblies. I've created my dimensioning rules that link to the parts I wish to change dimensions on.
Parameter("Bridge Spine:1", "BridgeLength")=Length
And I've tested this in the SubAssembly I've created and all appears fine. However when I go to insert the sub assembly into the main assembly I get the following error:
Parameter: The component named "Bridge Spine:1" was not found.
I've noticed that the new sub assembly has created new parts with the extension -01 on the end of each part (As expected) It appears that this link is being lost in the rule for the new sub assembly. i.e the rule is looking for Bridge Spine:1 instead of Bridge Spine-01:1
Pattern component is great but sometimes I have to pattern the same part several times to different dimensions in the same direction. For example: I have a part that has to go the left 26', then again at 29" and then again at 37". Other than manuallly constraining this 3 different times I've had to Pattern Component the first one at 26", then change the 2nd one to Independent. Then Pattern component that one to the 29" dimension. Change that 2nd one to Independent and pattern component that one to 37". It saves a lot of time but if I have to increase the model they are going on I have to start all over. Is there a command or something that will do this? I understand that a pattern is equal lenghs so maybe I am looking at the wrong command for what I am needing to do.
View 2 Replies View RelatedI have a few components in my assembly that I want to turn off under certain conditions. Using Component.IsActive, I can turn on or off an instance, but some of the components are in a pattern, and I want to turn on or off all instances of the component. To add to the challenge, the component patters are driven from Excel, and the quantity of parts changes.How can I turn off all of the instances of a pattern?
View 1 Replies View RelatedI have a rectangular component pattern which started out with all components. As more structure was added around it I started supressing different elements to suit, now a piece of structure has gone thru element 1 but i dont seem to be able to supress it... is there an easy way to get rid of element 1 without having to redefine the pattern? (redefining causes me other problems)
View 4 Replies View RelatedI am trying to set the appearance of sub-components in an assembly using iLogic.
Dim oDoc As Inventor.AssemblyDocument = ThisApplication.ActiveDocument Dim oCompDef As Inventor.ComponentDefinition = oDoc.ComponentDefinitionDim oCompOcc As Inventor.ComponentOccurrence 'parts in the assemblyFor Each oCompOcc In oCompDef.OccurrencesoCompOcc.Definition.Document.ActiveRenderStyle = oCompOcc.Definition.Document.RenderStyles("HVGM")Next
I have a code which I want to rotate a part. I have a text parameter 6 and 7. If one of the values is active I want to give the component a certain rotation.
Under the 'Hoekkoppeling' parameter is the angle constraint.
Below the
If Parameter ("KlemHoekstuk-01: 1", "KoppelingType") = 7
Then Hoekkoppeling = 60 deg
ElseIf Parameter ("KlemHoekstuk-01: 1", "KoppelingType") = 6
Then Angle = -60 deg
End If
I now get always an error on the second and fourth line.
I feel that the specify for the value is incorrectly.
I'm working on a main assembly. I want to edit the i properties of components within a sub-assembly, this is fine for "RING:1"
iProperties.Value("RING:1","Project", "Description")="A79-H020B001"
but I get an error message when i try to edit the iproperties of a patterned component within the sub-assembly.
I created a simple Part with some parameters to drive dimensions. Saved the part. I created an Assembly. Saved the assembly. Clicked Place iLogic Component. The Place iLogic Component window appeared Selected the Part. I can see the preview window (Part-01) & the parameter window... Used default values. Hit OK NO PART INSERTED! Using Inventor Pro 2014 64-BitLudesroc
View 1 Replies View RelatedI have a wall of frames, if you will, and some frames within this wall are different sizes. When doing the BOM, I want to be able to combine anything that has the same stock number as well as the same cut length. The only way I have thought to do this so far is to cycle through each stock number and if the cut length is the same, I override the quantity of one and change the BOM Structure of the other to "Reference".
How can I change the BOM Structure to reference without selecting the part or going through the BOM Editor? Is there some VBA code I could utilize? I am striking out by solely using iLogic.
Is there code for changing the color (or other properties) of the visible edges of a component in a drawing view, the same way I can do it manually by right-clicking a component and choosing Properties?
I wrote this rule to change the color of each individual drawing curve:
Edit: Ignore the "<!". It's the only way I could get the iLogic code to successfully post in the message
Spoiler (Highlight to read)<!Dim drawViews AsDrawingView
For Each drawViews In ThisApplication.ActiveDocument.ActiveSheet.DrawingViews
occ3 = drawViews.ReferencedDocumentDescriptor.ReferencedDocument.ComponentDefinition.Occurrences.ItemByName("GF_Plenum:1")
Dim newColor3 As Color
newColor3 = ThisApplication.TransientObjects.CreateColor(0,255,255)
[code]....
Show on Place Component
If I set this to true, then when I "place iLogic component", I don't get the form displayed or the parameter table or the model preview.
If set True, displays the form when placing this model as a component in an assembly. This setting affects Place Component and Place iLogic Component. If the template file has a form, this setting also affects Create In-Place Component.
The commented code does not work. I want to be able to open a part and change its size parameters before i open the assembly. this code will run as an external rule in a new empty file.
If i can do it without opening the part, that is even better. Test can I open a part, change a param, then close part.
Dim fname As String
fname ="C:Workspacemy_progchanF_BB_L.ipt"
Dim pDoc as PartDocument = ThisApplication.Documents.Open(fname,False)
pDoc = ThisApplication.Documents.Open(fname)
These are just attempts to find a syntax that works. I need the method to change the parameter.
'param = pDoc.PartComponentDefinition.Parameter.Param("TKNS")
'pdoc.parameter.Param("TKNS") = 8
pdoc.Save
pdoc.Close
I have a simple code below trying to iterate through all the assembly component and copy the iProperties > Occurrece Name (i.e. "Part1:1") and paste it to iProperties > Project tab > Part Number field for each individual part in assembly.
' set a reference to the assembly component definintion.
' This assumes an assembly document is open.
Dim oAsmCompDef As AssemblyComponentDefinition
oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
'Iterate through all of the occurrences
Dim oOccurrence As ComponentOccurrence
For Each oOccurrence In oAsmCompDef.Occurrences
Dim oName As String
oName = oOccurrence.Name
iProperties.Value(oOccurrence.Name, "Project", "Part Number") = oName
MessageBox.Show(oOccurrence.Name, "iLogic")
Next
The Debug message shows the correct output for every iteration, but when I check each part's properties they all have the Occurrence Name of the last part in the aseembly.
I wish to create a form that with multiple buttons. Each button will place another component (platform, stairs, ladder, railing).
I wish to place them using 'Place iLogic Component"
I know you can call this command by:
ThisApplication.CommandManager.ControlDefinitions.Item("iLogic.PlaceComponent").Execute
But is it possible to automatically browse to and open a file this way using a path "C:CPSVaultPlatformComponentsStairs.iam" within this command?
So I have been going round and round in circles on this one iam trying to use replace component within ilogic which is fine with switching one part for another but I want a drop down of parts so it replaces which ever one is active the problem I am having is establishing which one is active. So below is what I have so far but the problem is you cant seem to reference a part that is not in the assembly so I keep getting the error
The component named "Flange 1" was not found for example. I just need a way of establishing which one is currently in the assembly but with out referencing components that are not there.
If Component.IsActive("Flange 1")=True Then current = 1
If Component.IsActive("Flange 2")=True Then current = 2
If Component.IsActive("Flange 3")=True Then current = 3
If part = 1 And current = 2 Then Component.Replace("flange 2", "Flange 1.ipt", True) End If
If part = 1 And current = 3 Then Component.Replace("flange 3", "Flange 1.ipt", True) End If
If part = 2 And current = 1 Then Component.Replace("flange 1", "Flange 2.ipt", True) End If
If part = 2 And current = 3 Then Component.Replace("flange 3", "Flange 2.ipt", True) End If
If part = 3 And current = 1 Then Component.Replace("flange 1", "Flange 3.ipt", True) End If
If part = 3 And current = 2 Then Component.Replace("flange 2", "Flange 3.ipt", True) End If
I found this code to create a custom iProperty in the current, open document:
Dim propertyName As String = "MyProperty"Dim propertyValue as String = "Test Value"customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")Try prop = customPropertySet.Item(propertyName)Catch ' Assume error means not found customPropertySet.Add("", propertyName)End TryiProperties.Value("Custom", propertyName) = propertyValue
I have a iLogic rule that goes through each component of an assembly, counts how many times it occurs in the assembly, and then assigns that value to an iProparty (i.e. it inserts the total quantity of the part in some iProperty). Currently, however, it assigns the value to a default iProperty value, "Authority". I'd like, instead, for it to assign it to a custom iProperty called "Total QTY". However, I don't know how to tell Inventor to do the above code for a component in the assembly rather than the assembly itself. Below is my entire code. I've labeled where I'm guessing the above code should go. How I'd modify the above code to create the iProperty in the component being processed by the rule at that point?
Current
''True comment: Begin '''Commented-out Begin '''PartDocumentObject = 12290''AssemblyDocumentObject = 12291Dim openDoc As DocumentopenDoc = ThisDoc.DocumentDim docFile As DocumentIf openDoc.DocumentType = 12291 Then''If the open document is an assembly:''For each document referenced in this document:For
[code]......
my create a circular pattern in an assembly that maintains the orientation of the part being patterned.
This is for foundation plates. There are 3 plates. The plates are square, and have bolt holes in the corners of the plates. Since there are 3 plates and its going around a circle, the angle between the plates is 120 degrees.
Now, Ive been trying this for some time now and what is happening is the firs plate is fine, but then the second and third plate are rotated around their center axis. I would like it to simply remain as inserted and constrained within the assembly.
I have attached a picture to be more clear about what I want and what I'm currently getting.