AutoCAD Inventor :: Create Circular Component Pattern And Maintain Orientation
Oct 4, 2012
my create a circular pattern in an assembly that maintains the orientation of the part being patterned.
This is for foundation plates. There are 3 plates. The plates are square, and have bolt holes in the corners of the plates. Since there are 3 plates and its going around a circle, the angle between the plates is 120 degrees.
Now, Ive been trying this for some time now and what is happening is the firs plate is fine, but then the second and third plate are rotated around their center axis. I would like it to simply remain as inserted and constrained within the assembly.
I have attached a picture to be more clear about what I want and what I'm currently getting.
View 8 Replies
ADVERTISEMENT
Mar 21, 2012
Any way to change the Orientation of a circular pattern with iLogic?
View 1 Replies
View Related
Jan 31, 2012
I created a 12-sided polygon shape in the sketch mode. I created one line, fully constrained it and then used the circular pattern to finish the shape. Why can't I extrude the shape?
I have attached the file. It's a pretty basic shape. I don't understand why it wouldn't work...
View 2 Replies
View Related
Jan 9, 2012
How to create a Circular Pattern of the Solid Object by VBA. I tried it by calculation Polar Transformations but was unsuccessful.
Then Rotated the complete Solid Object which changed original location. Is there any way i can Change the Angle and Mirror instead of Making circular pattern.
View 1 Replies
View Related
Oct 18, 2011
Is there a way to create an upwards circular pattern, or a rectangular pattern with a circular movement?I'm trying to create a DNA-structure
View 1 Replies
View Related
Mar 27, 2012
How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
View 9 Replies
View Related
Jul 25, 2012
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
View 7 Replies
View Related
Jul 31, 2012
I am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
View 4 Replies
View Related
Sep 26, 2013
I patterned features but the material did not come along for the ride. I know I can change the material manually after the fact but I am making a parametric design so I want this to happen automatically. How do I do this?
View 5 Replies
View Related
May 14, 2013
I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.
I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.
I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?
View 2 Replies
View Related
Nov 12, 2013
I have modelled a disc, which has 6 cylindrical extrusions in a circular pattern on the disc surface. I want to change the number of occurrences (the "placement") to 9 but the "OK" button is disabled. I get the preview od the 9 occurrences, but it will not complete the command.
View 3 Replies
View Related
Nov 19, 2012
I need to know what sketch is associated to either a "Rectangular"or "Circular"array. This is so I can filter out sketches that are not repeated in an array.
Here is my code so far (Circular Array).
Dim oCP As CircularPatternFeature
For Each oCP In oDef.Features.CircularPatternFeatures
THIS IS THE TROUBLE LINE If sketch = oCP.Parent Then
Set oCP = oDef.Features.CircularPatternFeatures.Item(oCP.Name)
[code]........
I have a simple test part containing an extruded disk (Sketch1) and 8 holes on a pcd (Sketch2). I only want to array a sketch if it is arrayed.
View 4 Replies
View Related
Sep 25, 2012
I want to arrange these outer circles in a corcular pattern at equal distance and at equal angle from each other without using circular patten feature in assembly tab. How do I do that.
The reasomn I dont want to use circular pattern in assembly tab is if I do that then, I cannot change color of each outer circle separatly If I change one color it changes color for all of these whcih i dont want.
I want to have each outer circle of different color.
View 3 Replies
View Related
Jul 23, 2012
While using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time. also after applied any of these features I can't use trim feature, can I ? but sometimes using the trim feature after applying the Circular Pattern feature or rectangular pattern can be necessary.
View 1 Replies
View Related
Oct 22, 2012
I am using a circular pattern to re-position an internal keyway and am wondering if it is possible to supress the original keyway? Right now I have to give it a 'Placement' value of 2 to get the keyway to shift the amount I want, and as such it keeps the original as well as the new (overlapping them). I wish to suppress only the original one leaving new one...
Inventor 2014 PDS
View 6 Replies
View Related
Sep 28, 2012
How to create a circular pattern around the predefined Z axis.
Dim oCompdef As ComponentDefinition
Dim oDoc As PartDocument
Dim oSketch As PlanarSketch
Dim oPart As PartFeatures
Dim oProfile As Profile
[code]...
View 2 Replies
View Related
May 31, 2013
I created a partial sphere with six features on the surface of the sphere. I then applied a circular pattern to each of the siz features. I called the features r1, r2, ..., r6.
r1, r2, r5 and r6 worked as expected. there are 16 features evenly spaced around the surface.
r3 and r4 are different in that the original feature is missing after applying the circular pattern.
each of the six features is as identical as I could get them. I followed the same build seauence for all of them.
each feature is made up of four objects - cut1, cut2, sweep and dimple. I selected the four objects for a row, then applied the circular pattern.
If I delete the circular pattern for r3 or r4, the original feature becomes visible again.
So, why are r3 and r4 behaving differenly than the other four?
I have tried a number of things, including re-drawing feature r3 from scratch with no change in teh results.
View 8 Replies
View Related
Sep 11, 2003
The problem: I want a circular pattern for rectangular shaped holes, and I don't want the holes to rotate. The circular pattern doesn't have an option to retain the orientation.
View 9 Replies
View Related
Apr 19, 2012
I have a sheetmetal assembly with helical shaped parts. I need to place about 50 little brackets and some corresponding rollers along the length of these helical pieces. The spacing is even so a pattern would be perfect, except I don't know how to get it to follow the shape of the part. The brackets are located to slots in the helical parts which were made with a rectangular pattern in the unfolded state. I tried to do a "feature pattern select" but it only saw the rectangular pattern as it is in the unfolded state (a straight line). I then gave up on patterns and started working on manually mating them into place but realized that the geometry of the slot was distorted (theory) and didn't leave me with any useable surfaces.
View 9 Replies
View Related
Mar 15, 2012
I have a component pattern with 3 components in it and I need to remove one of the components from the pattern. How can I modify the pattern through the API? I have tried various things but I do not appear to be able to change the pattern.
View 1 Replies
View Related
Dec 27, 2011
In an assembly, is there a way to pattern a component in the X, Y and Z directions? I need to make a certain number of components, and each instance changes by the same delta x y and z. The dialog box will only show me column and row options.
View 7 Replies
View Related
Feb 9, 2007
Is there a way to explode a Component Pattern? I would like to create a 12 x 12 Component Pattern in an IAM and then explode it so that I have 144 individual objects.
View 6 Replies
View Related
Oct 13, 2013
I am setting up a family of parts that consist of a round disc with a fixed OD and a circular pattern of notches cut into the OD. The notches must go to a certain depth from the center, so those parameters are set. My problem is that I need to control the amount of material left between the notches, along the OD, after the pattern is done. Given the fixed parameters of the major OD, minor OD (3.5" in this case) and number of notches, the only way to control the amount of material between notches is to change the angle. When I set up the sketch to do the notches, I can only get a fully constrained sketch if I assign a specific angle to the notch. I need to be able to set it up so that the angle of the notch varies so the end result is a specifc amount of material left after the circular patter is completed.
In the attached PDF, I show what I have done so far. In this case the OD of the part is 4" and the diameter of the notch at it's closest to the center is 3.5". So basically, I end up with a driven parameter of 0.443. If I assign this value the parameter of d14, I need to make it equal to a ratio of another parameter (let's call it d15) so that d14 = d15*2.. This can only be accomplished by changing the angle.
In my family, the major OD and minor OD remain the same, but the angle must change to retain a specific amount of material between the notches when the number of notches is increased or decreased.
Is there an iLogic rule I can write to control this?
View 6 Replies
View Related
Nov 9, 2012
Pattern component is great but sometimes I have to pattern the same part several times to different dimensions in the same direction. For example: I have a part that has to go the left 26', then again at 29" and then again at 37". Other than manuallly constraining this 3 different times I've had to Pattern Component the first one at 26", then change the 2nd one to Independent. Then Pattern component that one to the 29" dimension. Change that 2nd one to Independent and pattern component that one to 37". It saves a lot of time but if I have to increase the model they are going on I have to start all over. Is there a command or something that will do this? I understand that a pattern is equal lenghs so maybe I am looking at the wrong command for what I am needing to do.
View 2 Replies
View Related
Apr 20, 2012
I have a few components in my assembly that I want to turn off under certain conditions. Using Component.IsActive, I can turn on or off an instance, but some of the components are in a pattern, and I want to turn on or off all instances of the component. To add to the challenge, the component patters are driven from Excel, and the quantity of parts changes.How can I turn off all of the instances of a pattern?
View 1 Replies
View Related
Oct 29, 2013
I have a rectangular component pattern which started out with all components. As more structure was added around it I started supressing different elements to suit, now a piece of structure has gone thru element 1 but i dont seem to be able to supress it... is there an easy way to get rid of element 1 without having to redefine the pattern? (redefining causes me other problems)
View 4 Replies
View Related
Apr 17, 2012
I am trying to program the view placement of various parts and have run into a situation where I need to place flat patterns. On the programming side there isn't an issue, but the issue occurs when attempting to select the wanted view orientattion.
Attached you will find 2 screen shots. One of them is from the "Folded Model" (Take note of the View Cube)
The other is from only Pressing the "Go to Flat Pattern" Button and being in "Flat Pattern" viewing mode (Note the Cube)
I need the Flat Pattern View to correspond with the Orientation of the Folded Model.
View 2 Replies
View Related
Sep 20, 2013
How to modify the code below to delete suppressed parts in a pattern (entire pattern)?
Dim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesoComps = ThisDoc.Document.ComponentDefinition.OccurrencesFor Each oComp In oCompsIf Component.IsActive(oComp.Name) = False Then oComp.DeleteNext
Code works fine if there are single instances of the part. It throws a error when you have a suppressed pattern.
View 7 Replies
View Related
May 31, 2013
Is it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies
View Related
Feb 25, 2013
I'm working on a UDK level for a college assignment.
I want to create a circular shaped elevator with a circular fence around it that's roughly half the size of an average sized character standing on it. I then wish it import this as a static mesh into UDK.
Here are 2 sketched up designs of the elevator, what I want to create.
1st image: [URL]....
2nd image: [URL]....
I am very new to 3DS Max so I would prefer a list of steps to follow to create this elevator with a a fence,
View 2 Replies
View Related
Jul 4, 2009
now a have a typical error to insert in my assambly a item from my content center, reciveing a erro like "unable to create component", i´m looking for a solution inside forums and find a solution but didn´t work for me, the solution watched and did for me as deleted of the content folder "CACHE" in my computer C:/....all users/inventor..../cache.
I use AI2009 with SP1.
What can i do, delete all families from content center and upload again?
View 4 Replies
View Related
