AutoCAD Inventor :: Non-Circular / Non-rectangular Pattern
May 14, 2013
I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.
I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.
I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?
View 2 Replies
ADVERTISEMENT
Mar 27, 2012
How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
View 9 Replies
View Related
Jul 25, 2012
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
View 7 Replies
View Related
Nov 19, 2012
I need to know what sketch is associated to either a "Rectangular"or "Circular"array. This is so I can filter out sketches that are not repeated in an array.
Here is my code so far (Circular Array).
Dim oCP As CircularPatternFeature
For Each oCP In oDef.Features.CircularPatternFeatures
THIS IS THE TROUBLE LINE If sketch = oCP.Parent Then
Set oCP = oDef.Features.CircularPatternFeatures.Item(oCP.Name)
[code]........
I have a simple test part containing an extruded disk (Sketch1) and 8 holes on a pcd (Sketch2). I only want to array a sketch if it is arrayed.
View 4 Replies
View Related
Jul 23, 2012
While using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time. also after applied any of these features I can't use trim feature, can I ? but sometimes using the trim feature after applying the Circular Pattern feature or rectangular pattern can be necessary.
View 1 Replies
View Related
Sep 11, 2003
The problem: I want a circular pattern for rectangular shaped holes, and I don't want the holes to rotate. The circular pattern doesn't have an option to retain the orientation.
View 9 Replies
View Related
Oct 18, 2011
Is there a way to create an upwards circular pattern, or a rectangular pattern with a circular movement?I'm trying to create a DNA-structure
View 1 Replies
View Related
Sep 3, 2012
Is it possible to alter the Fence Shape of a detailed view from circular to rectangular after the view has been created?
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
View 2 Replies
View Related
Nov 12, 2013
I have modelled a disc, which has 6 cylindrical extrusions in a circular pattern on the disc surface. I want to change the number of occurrences (the "placement") to 9 but the "OK" button is disabled. I get the preview od the 9 occurrences, but it will not complete the command.
View 3 Replies
View Related
Feb 22, 2012
Can an equation be used to calculate equal distances when using the rectangular pattern.Regarding the attached .ipt file i would like to place 25 holes in the X direction with equal gap size between each hole.Also how to calculate the number of holes in the Y direction again with equal distance between each hole.I have not done this before with equations but was thinking that i would need to use the Length x Width in the equation.Do i need to add figures into the Parameters box also?
The attached file with the Hole feature the sketch is not constrained for the purpose of using an equation so i know how far from the start of the part to get equal distances between each hole to the end of the part .
View 5 Replies
View Related
Feb 20, 2012
I am using Inventor 2012. I have a horizontal feature that terminates at a vertical plane on one end and an angled plane at the other end. I want to pattern it down but when I use Adjust, the patterned features do not adjust to the angled plane. They just go strait down from the first feature.
Does Adjust only work if the terminator is a solid surface instead of a plane?
View 1 Replies
View Related
Nov 3, 2011
I am having a problem with an iPart. I created a rectangular patern in an iPart. When I place the member of the iPart in the Assembly file the pattern is not there. I need it to constrain another part to it.
View 4 Replies
View Related
Dec 1, 2009
Looking for some sample code for patterning a hole in a part using Inventor 2010. I dont need it to be selected because it is the only hole i have in the part. My main trouble is that I am having trouble withobjectcollection idea. As you can guess I am a newbie at Inventors API.
View 5 Replies
View Related
Jan 31, 2012
I created a 12-sided polygon shape in the sketch mode. I created one line, fully constrained it and then used the circular pattern to finish the shape. Why can't I extrude the shape?
I have attached the file. It's a pretty basic shape. I don't understand why it wouldn't work...
View 2 Replies
View Related
Sep 25, 2012
I want to arrange these outer circles in a corcular pattern at equal distance and at equal angle from each other without using circular patten feature in assembly tab. How do I do that.
The reasomn I dont want to use circular pattern in assembly tab is if I do that then, I cannot change color of each outer circle separatly If I change one color it changes color for all of these whcih i dont want.
I want to have each outer circle of different color.
View 3 Replies
View Related
Jan 9, 2012
I can not use rectangular pattern for bolt in an assembly.
View 7 Replies
View Related
Mar 21, 2013
I'd like to make a rectangluar pattern of a part that is groove welded into a plate. Inside the pattern command I can select the part but not the weld. How to avoid having to do each weld individually?
View 2 Replies
View Related
Aug 29, 2013
If I have a RectangularPattern how do I suppress individual features in the pattern.
For example I have a single row of holes, and I want to suppress the odd numbered holes.
I've tried this...
CComPtr<FeaturePatternElements> pFeaturePatternElements ;
pRectPatFeat->get_PatternElements (&pFeaturePatternElements) ;
const int ikNumElements = pFeaturePatternElements->GetCount() ;
wprintf (L" this has %d FeaturePatternElements
[Code]....
... but it crashes at the assignment of Suppressed
View 4 Replies
View Related
Jan 9, 2012
How to create a Circular Pattern of the Solid Object by VBA. I tried it by calculation Polar Transformations but was unsuccessful.
Then Rotated the complete Solid Object which changed original location. Is there any way i can Change the Angle and Mirror instead of Making circular pattern.
View 1 Replies
View Related
Oct 22, 2012
I am using a circular pattern to re-position an internal keyway and am wondering if it is possible to supress the original keyway? Right now I have to give it a 'Placement' value of 2 to get the keyway to shift the amount I want, and as such it keeps the original as well as the new (overlapping them). I wish to suppress only the original one leaving new one...
Inventor 2014 PDS
View 6 Replies
View Related
Mar 21, 2012
Any way to change the Orientation of a circular pattern with iLogic?
View 1 Replies
View Related
Sep 28, 2012
How to create a circular pattern around the predefined Z axis.
Dim oCompdef As ComponentDefinition
Dim oDoc As PartDocument
Dim oSketch As PlanarSketch
Dim oPart As PartFeatures
Dim oProfile As Profile
[code]...
View 2 Replies
View Related
May 31, 2013
I created a partial sphere with six features on the surface of the sphere. I then applied a circular pattern to each of the siz features. I called the features r1, r2, ..., r6.
r1, r2, r5 and r6 worked as expected. there are 16 features evenly spaced around the surface.
r3 and r4 are different in that the original feature is missing after applying the circular pattern.
each of the six features is as identical as I could get them. I followed the same build seauence for all of them.
each feature is made up of four objects - cut1, cut2, sweep and dimple. I selected the four objects for a row, then applied the circular pattern.
If I delete the circular pattern for r3 or r4, the original feature becomes visible again.
So, why are r3 and r4 behaving differenly than the other four?
I have tried a number of things, including re-drawing feature r3 from scratch with no change in teh results.
View 8 Replies
View Related
Sep 19, 2013
I would like to use a sketch as the basis for a rectangular pattern which is set up to use the curve length for both directions of the rectangular pattern so that when I update my rectangle in a sketch, the pattern automatically adjusts to the new sketch. I have sketched a rectangle, and used one leg of the rectangle to establish the direction and length of one dimension of the array.
However, when I try and choose the Direction 2, my only options are the entire rectangle or faces- I can no longer select other and choose a single side of the rectangle.
I was able to accomplish what I wanted by using two sketches, with the second sketch simply projecting one leg from the first sketch. Using one sketch just seems inherently safer than trusting projected geometry.Is there a way to accomplish this with one sketch instead?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 2 Replies
View Related
Oct 4, 2012
my create a circular pattern in an assembly that maintains the orientation of the part being patterned.
This is for foundation plates. There are 3 plates. The plates are square, and have bolt holes in the corners of the plates. Since there are 3 plates and its going around a circle, the angle between the plates is 120 degrees.
Now, Ive been trying this for some time now and what is happening is the firs plate is fine, but then the second and third plate are rotated around their center axis. I would like it to simply remain as inserted and constrained within the assembly.
I have attached a picture to be more clear about what I want and what I'm currently getting.
View 8 Replies
View Related
Sep 10, 2012
Any work around for rectangular patterns in assemblies?
I want to pattern a screw using an existing Part Feature Pattern; I have figured out depending on how the part is assembled you get two outcomes and if the part is mated opposite side to how the feature was patterned you get the parts going the wrong way (see attached pic).
Is there a “flip direction” option anywhere or do you just have to be super diligent on how the seed feature orientation is in relation to the assembled pattern?
View 9 Replies
View Related
Oct 3, 2012
We are using Inventor 2011 and I would like to make a small app that allows my users to graphically select one or more occurrences of a rectangular pattern feature Then allow them to suppress them if desired.
I have determined the code to loop through the pattern occurrences and toggle suppression for any instance. What I do not know how to do is determine which occurrences have been graphically selected.
At this time I am only concerned with round hole features. (Perforated metal)
View 3 Replies
View Related
Oct 13, 2013
I am setting up a family of parts that consist of a round disc with a fixed OD and a circular pattern of notches cut into the OD. The notches must go to a certain depth from the center, so those parameters are set. My problem is that I need to control the amount of material left between the notches, along the OD, after the pattern is done. Given the fixed parameters of the major OD, minor OD (3.5" in this case) and number of notches, the only way to control the amount of material between notches is to change the angle. When I set up the sketch to do the notches, I can only get a fully constrained sketch if I assign a specific angle to the notch. I need to be able to set it up so that the angle of the notch varies so the end result is a specifc amount of material left after the circular patter is completed.
In the attached PDF, I show what I have done so far. In this case the OD of the part is 4" and the diameter of the notch at it's closest to the center is 3.5". So basically, I end up with a driven parameter of 0.443. If I assign this value the parameter of d14, I need to make it equal to a ratio of another parameter (let's call it d15) so that d14 = d15*2.. This can only be accomplished by changing the angle.
In my family, the major OD and minor OD remain the same, but the angle must change to retain a specific amount of material between the notches when the number of notches is increased or decreased.
Is there an iLogic rule I can write to control this?
View 6 Replies
View Related
Dec 13, 2013
I'm trying to create a custom expression in a structure table that will list the "size" of the structure, wheter it be a circular or rectangular structure. My column simply states size and I want it to label 5' for a circular or 4'x4' for a rectangular (or whatever the specific sizes are). The thought was to create an IF function, but Structure Shape was not available to use in expressions (among other problems). Short of using the description field (tedious) as a workaround?
In this example - CB-104 is a rectangular structure and CB-106 is a circular. I'd like the CB-104 size to read 4'x4'.
Civil 3D 2014 SP1
View 5 Replies
View Related
Jul 19, 2012
Is it possible in revit to draw a revision cloud having rectangular and circular shape as we do it in the case of autocad.
View 5 Replies
View Related
Jul 19, 2012
Can we create revision cloud in Revit as autocad i.e. by rectangular or circular option
View 5 Replies
View Related
