Revit :: Rectangular And Circular Revision Cloud
Jul 19, 2012Is it possible in revit to draw a revision cloud having rectangular and circular shape as we do it in the case of autocad.
View 5 Replies
ADVERTISEMENT
Revit :: Creating Revision Cloud By Rectangular Or Circular Option
Jul 19, 2012Can we create revision cloud in Revit as autocad i.e. by rectangular or circular option
View 5 Replies View RelatedRevit :: Add Revision Line Without Adding Rev Cloud?
Dec 15, 2011Yes, I am new to Revit, and I can add a revision cloud and see the line added to the rev block but I'm trying to add revision and have it show up on the rev block without adding a rev cloud. I did it once and can't figure out how to do it again. On the Sheet Issues/Revisions dialog box I check on the Issued box and on show I've selected Cloud and Tag, Tag, and None.
View 2 Replies View RelatedRevit :: Editing The Revision Cloud Shape?
Feb 18, 2010Is it possible, short of doing some programming through the Revit API, to change the shape of the arcs created with the Revit "Revision Cloud" tool? For example, with AutoCAD you can enter the size of the arcs that you want to use when you use the revision cloud command. Is there anything similar in Revit?
I have done some searching and am surprised at how little mention there is about both the strange look of the clouds produced by the Revit tool and their lack of flexibility. Everyone focuses mainly on being able to associate clouds with deltas and a Revision Schedule, which I admit is important also.
Revit :: Revision Cloud / Change Tag Numbering?
Jun 27, 2012Im having to cloud Revisions to my drawings. Heres what my Revision Schedule needs to be like
Revision 2 (Tag # 4)
Revision 1 (Tag # 2)
Bid Issue (No Tag)
Is there any way to change the Tag number? Because right now this is what im getting
Revision 2 (Tag # 2)
Revision 1 (Tag # 1)
Bid Issue (No Tag)
Revit :: Revision Cloud Calligraphy Line Style
Sep 30, 2011Is there a way to achieve the calligraphy line style found in AutoCAD for revision clouds in Revit?
View 1 Replies View RelatedAutoCAD Inventor :: Non-Circular / Non-rectangular Pattern
May 14, 2013I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.
I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.
I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?
AutoCAD Inventor :: Circular / Rectangular Pattern Sketch Name
Nov 19, 2012I need to know what sketch is associated to either a "Rectangular"or "Circular"array. This is so I can filter out sketches that are not repeated in an array.
Here is my code so far (Circular Array).
Dim oCP As CircularPatternFeature
For Each oCP In oDef.Features.CircularPatternFeatures
THIS IS THE TROUBLE LINE If sketch = oCP.Parent Then
Set oCP = oDef.Features.CircularPatternFeatures.Item(oCP.Name)
[code]........
I have a simple test part containing an extruded disk (Sketch1) and 8 holes on a pcd (Sketch2). I only want to array a sketch if it is arrayed.
AutoCAD Inventor :: Circular / Rectangular Pattern Feature
Jul 23, 2012While using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time. also after applied any of these features I can't use trim feature, can I ? but sometimes using the trim feature after applying the Circular Pattern feature or rectangular pattern can be necessary.
View 1 Replies View RelatedAutoCAD Architecture :: 2010 - Revision Cloud With Tag?
Sep 7, 2011I am trying to add a revision cloud with an attached tag. I clicking on Annotate/Markup/Revision Cloud on the ribbon, but there is no such option there that I can find.
View 2 Replies View RelatedAutoCAD LT :: How To Change Revision Cloud To Line
May 30, 2013How can i change a revision cloud to line.
View 1 Replies View RelatedAutoCad :: Turn Object Into Revision Cloud?
Jun 18, 2013I am using autocad 2011 and i am trying to turn an object into a revision cloud like i used to.
When i open the revision cloud, the only options it now shows are "exit/options" (option only opens a box that allows you to change the arc style and cord length). It does not have "arch length, object or style".
(i am using AutoCad Mechanical but i changed all the toolbars to AutoCad standard)I cant make a neat revision cloud without those original options.
AutoCad 2D :: Make Revision Cloud In 2002
May 15, 2012How I can make the revision cloud in Autocad 2002. Does it have the function? In which meny is it? What is the short command?
View 7 Replies View RelatedAutoCAD Inventor :: Circular Pattern For Rectangular Shaped Holes
Sep 11, 2003The problem: I want a circular pattern for rectangular shaped holes, and I don't want the holes to rotate. The circular pattern doesn't have an option to retain the orientation.
View 9 Replies View RelatedAutoCAD Inventor :: Create Rectangular / Circular Pattern For DNA Structure
Oct 18, 2011Is there a way to create an upwards circular pattern, or a rectangular pattern with a circular movement?I'm trying to create a DNA-structure
View 1 Replies View RelatedAutoCAD Inventor :: 2012 - Missing Add-Ins Tab / Revision Cloud
Mar 13, 2012Im running Inventor 2012 on a 64 bit windows 7 machine.
Having just newly discovered that Inventor has a Revision Cloud command, I read through the forums and found out that I had to install the two SKD .msi files named DeveloperTools & UserTools, which I have done. I also read that I have to execute the RegisterGeneralTools.exe which I have also done. I've rebooted and restarted Inventor numerous times thinking that my Add-Ins tab will show up with my newly acquired Revision Cloud command in Drawing Tools but to no avail.
Im coming from Inventor 2009 so I'm not sure if the Add-Ins tab is now supposed to be the Add-In Manger but from what I seen I should have a tab just right of "Get Started" and should include Drawing Tools and General Tools.
AutoCAD Architecture :: 2012 - Revision Cloud And Tag Tool
Apr 18, 2013I work on AutoCad 2012. I am trying to find the revision cloud & tag tool. I seem to only be able to place a revision cloud without a tag on the drawing. I don't see a tag option and searching for the option on the help menu has resulted in zero hits. Does AutoCad 2012 not offer this feature or am I looking in the wrong location?
View 1 Replies View RelatedAutoCAD Inventor :: Revision Cloud In The Drawing Mode
Aug 22, 2013Starting a drawing which now needs a revision. Can't for the life of me find a revision cloud tool to mark up a change. This is the feature in SW [URL].......
View 1 Replies View RelatedAutoCAD Inventor :: Detail View Fence Shape (Circular To Rectangular)
Sep 3, 2012Is it possible to alter the Fence Shape of a detailed view from circular to rectangular after the view has been created?
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
AutoCAD Civil 3D :: Structure Label Expression - Circular Versus Rectangular
Dec 13, 2013I'm trying to create a custom expression in a structure table that will list the "size" of the structure, wheter it be a circular or rectangular structure. My column simply states size and I want it to label 5' for a circular or 4'x4' for a rectangular (or whatever the specific sizes are). The thought was to create an IF function, but Structure Shape was not available to use in expressions (among other problems). Short of using the description field (tedious) as a workaround?
In this example - CB-104 is a rectangular structure and CB-106 is a circular. I'd like the CB-104 size to read 4'x4'.
Civil 3D 2014 SP1
AutoCAD 2010 :: Revision Cloud - Manually Change Layers
Apr 20, 2012Is there a way to have the Revision Cloud be put on the correct layer by default rather than having to manually change layers??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Visual LISP / AutoLISP :: Retrieve Arc Length From Revision Cloud?
Oct 28, 2011Is there any way to retrieve the arc length from Revision cloud and how can we identify that object is a Revision Cloud.
View 9 Replies View RelatedAutoCAD Inventor :: Creating Circular Pattern Of Single Occurrence Of Rectangular Pattern
Mar 27, 2012How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
AutoCAD Inventor :: Circular Pattern / Rectangular Pattern Features
Jul 25, 2012As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
Revit :: How To Add New Parameters To Revision Schedule
Feb 22, 2012Is there a way to add new parameters to revision schedule
View 2 Replies View RelatedRevit :: How To Add Single Revision To All Sheets
May 25, 2011I would like to be able to add a single revision to all sheets at once. For example when doing a major issue of all sheets for building approval. In this case I don't use revision clouds but use the "Revisions on Sheet" function in the properties for the individual sheet. Hence the problem, having to individually select every sheet one by one and add the revision to each sheet. Is there a way to multiple select all or some sheets and just do it once? I've tried doing this through a schedule but that doesn't let you select and change a revision either. Is there an add-in that could do this perhaps?
View 3 Replies View RelatedRevit :: Get Sheet Revision Into DWF File Name
Jun 10, 2012Is there any neat way of getting the sheet revision into the DWF filename automatically when publishing?
View 1 Replies View RelatedRevit :: Revision Clouds Not Showing Up?
Jul 24, 2013A new phenomenon today after updating R14 yesterday with the 'rvt2014ur11' patch, though this might not be connected. My revision clouds, after finishing the edit and clicking the big green tick, disappear! The revion number and note is added to the bottom of the sheet but no revision cloud. As annotation objects visibility is on, there is no annotation cut off on a sheet view and they do not show up when the 'Reveal Hidden Elements' is chosen.
View 1 Replies View RelatedRevit :: Revision Schedule Not Sorting By Date
May 22, 2013Revision schedule sorting improperly? For some reason it seems this particular schedule is sorting by month and ignoring the year.
View 2 Replies View RelatedRevit :: Revision Clouds Crashing 2013?
Apr 23, 2012Having problem of Revit 2013 crashing when they go to close a large revision cloud? it doesnt seem to do iit with a smaller cloud, but when you click the green checkmark to close a large one such as clouding a large plan it shuts down with no option to save.
View 7 Replies View RelatedRevit :: Change Revision To Multiple Sheets?
Jul 3, 2013how I can change the revisions to multiple sheets quickly, instead of going into each and every sheet and manually changing the revision?
Surely Autodesk has a fast and simple way to do this.