I have set iLogic to change a rectangular pattern to a certain amount of occurrences depending on which is selected , i.e. 117 cavities, 140 cavities and 96 cavities. Only one is active (or unsuppressed ) at a time.
What I need to do is suppress the 4 corners of each pattern, considering there's only one pattern and is dynamic.
How do you suppress a certain pattern occurence in Ilogic?
View 6 Replies View RelatedIs it possible to suppress an occurrence of a pattern in part environment using iLogic? I saw something for assembly environment, but I can't make it work for part. My iLogic knowledge is quite basic.
View 1 Replies View RelatedI need to be able to suppress individual elements of a circular pattern so I can retain the angular orientation while being able to reduce the number of instances. I have found how to suppress the entire circular pattern, but can't seem to get the right terminology to access the elements one at a time.
The code I have to suppress the entire pattern is Feature.InventorFeature("Circular Pattern").Suppressed = True.
how to suppress a pattern in *.iam by ilogic?
I used ilogic to suppress the main components, but the rest are not suppressed.
For example, I have component "A" and make it a pattern (Colum and Row are variable). How to use ilogic to suppress rest not just "A".
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
I'm trying to use ilogic to suppress some individual elements of a pattern but i couldn't find any command that can target component pattern elements. When i try to capture its current state with the right click menu it does nothing.
I can of course suppress the part within the element but then it doesn't update the BOM.
I need to suppress a pattern in an 2nd level subassembly. But is only able to do it in the same level where the pattern is placed etc:
If Length < 3000 mm Then
Component.IsActive("1 st level subassembly", "Name of pattern in 1nd level subassembly") = False
End If
But if i do it with an MakePath... etc.:
If Length < 3000 mm Then
Component.IsActive(MakePath("1 st level subassembly", "2 nd level subassembly", "Name of pattern in 2nd level subassembly")) = False
End If
If Length < 3000 mm Then
Component.IsActive(MakePath("1 st level subassembly", "2 nd level subassembly"), "Name of pattern in 2nd level subassembly") = False
End If
is it not possible to suppress a pattern by an MakePath?
I downloaded a model off a website, it is, (excuse my electrical background ignorance) a jumper for terminal blocks.Our electricians use these and cut them down to size as needed.
Is there a way to use iLogic and a form or message box, to prompt upon opening the part as to how many jumpers are needed for the current assembly> It comes stock with 10, but they sometimes only use 2, 3 4 etc. etc..
I didn't model the part, but I can if it will make the rule easier to write.My idea I suppose was to have the part modeled with 2 jumpers and then use ilogic to create more if necessary.
I have a couple of dozen features in my part, of which only one will be active at any time. The feature tree may be subject to additions, so I am looking for an ilogic rule that will first suppress all of the features in the part, and then switch on the specific feature I require (using a parameter). Any code to suppress ALL features?
View 9 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
I have a simple code below trying to iterate through all the assembly component and copy the iProperties > Occurrece Name (i.e. "Part1:1") and paste it to iProperties > Project tab > Part Number field for each individual part in assembly.
' set a reference to the assembly component definintion.
' This assumes an assembly document is open.
Dim oAsmCompDef As AssemblyComponentDefinition
oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
'Iterate through all of the occurrences
Dim oOccurrence As ComponentOccurrence
For Each oOccurrence In oAsmCompDef.Occurrences
Dim oName As String
oName = oOccurrence.Name
iProperties.Value(oOccurrence.Name, "Project", "Part Number") = oName
MessageBox.Show(oOccurrence.Name, "iLogic")
Next
The Debug message shows the correct output for every iteration, but when I check each part's properties they all have the Occurrence Name of the last part in the aseembly.
We are using Inventor 2011 and I would like to make a small app that allows my users to graphically select one or more occurrences of a rectangular pattern feature Then allow them to suppress them if desired.
I have determined the code to loop through the pattern occurrences and toggle suppression for any instance. What I do not know how to do is determine which occurrences have been graphically selected.
At this time I am only concerned with round hole features. (Perforated metal)
Is there a way to put a bunch of imates under one line code?
I have imate iInsert:1 thru iInsert:49 I need them all suppressed when an event happens.
I can get it to work one by one but that would be a lot of code.
Tried a few other thing but seems not to work.
2012 Factory Design Suite ( will not load 2013)
I have a rectangular component pattern which started out with all components. As more structure was added around it I started supressing different elements to suit, now a piece of structure has gone thru element 1 but i dont seem to be able to supress it... is there an easy way to get rid of element 1 without having to redefine the pattern? (redefining causes me other problems)
View 4 Replies View RelatedIf I have a RectangularPattern how do I suppress individual features in the pattern.
For example I have a single row of holes, and I want to suppress the odd numbered holes.
I've tried this...
CComPtr<FeaturePatternElements> pFeaturePatternElements ;
pRectPatFeat->get_PatternElements (&pFeaturePatternElements) ;
const int ikNumElements = pFeaturePatternElements->GetCount() ;
wprintf (L" this has %d FeaturePatternElements
[Code]....
... but it crashes at the assignment of Suppressed
Lets say you have 100 Keps Nuts in an assembly. Named (KepsNut1,KepsNut2, etc)And you want to suppress them on and off.
Would there be a way to make an array 1-100 and just say suppress/unsupress "KepsNut" & array list of numbers.To basically add the two strings and find all the components in that array and turn them off or on.!
I am trying to suppress part that are labeled as "Reference" on the BOM Strutcture and I can't get the program to cycle through the subassemblies. The following code runs through all the components on the top-level assembly but I can't get it to cycle through the subassemblies.
oCompDef = ThisDoc.Document.ComponentDefinitionoAssemblyComponents = oCompDef.OccurrencesDim oOccurrence As ComponentOccurrenceDim oSubOccurrence1 As ComponentOccurrenceFor Each oOccurrence In oAssemblyComponents If (oOccurrence.BOMStructure = BOMStructureEnum.kReferenceBOMStructure) Then Component.IsActive(oOccurrence.Name) = False Else Component.IsActive(oOccurrence.Name) = True End IfNext
in addition to this question
[URL]......
What is the code for hiding different Solid Bodies:
with the User Parameter type, I want to select a certain type of Shackle and suppress / hide the other Solid Bodies.
I'm using I-logic to suppress components in an assembly. I've attached a screenshot with 3 suppressed components.
In the browser the parts are suppressed but in the BOM (items 6,7,9) they are not. Is there a piece of code for this?
I have several parts that are controlled by ilogic rules linked to member names ,and in some cases some of staff run the productivity bonus tool (rename browser nodes) to either file name or part number.
This causes the rules to fail as rules definition name have been overwritten.
I am after a simple rule that is triggered on save to save my occurrence browser name to what originally was defined
Dim Browsername As String = Plywood 01
Member names example
Plywood 01
Plywood 02
Plywood 03
Plywood 04
I have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
I created an iLogic rule that allows in a sheet metal part to the informations Length, widht and area of a flat pattern. This rule run and the iproerties are created (see attachment file).
Now, I will run this rule from an assembly file to create automatically, in all sheet metal components, theses iproperties.
Is it possible ? what must I change in this rule ?
We have an idw package we use for Quality control. This idw has more than one sheet. Each sheet has a part placed on the sheet with dims.( DWF attached). Next we open DA inside of the file and run a report. (exported txt attached). I am trying to use ilogic the make the same report with a iLogic browser button pick. I have 2 codes (code examples on attached jpg) that i need to make into 1, or whatever works.
1st code
Dim oDoc As DrawingDocumentoDoc = ThisApplication.ActiveDocument Dim oSubDoc As Inventor.Document Dim oPropSets As PropertySets Dim oPropSet As PropertySetDim oPartNumiProp As Inventor.Property For Each oSubDoc In oDoc.AllReferencedDocumentsIf oSubDoc.documenttype.
[code]....
2nd code
fileheader = "QAF Parts for Planning "fileheader1 = ThisDoc.PathAndFileName(True) 'first line header of txt filedescription = "Components to use for Nesting" 'use this variable in the body of the txtdelimiter = "," 'character to separate the names and values on each lineoWrite = System.IO. File. Create Text (ThisDoc.PathAndFileName(False) & ".txt")oWrite.WriteLine(fileheader) 'include the fileheader on the first.
[code]....
I have received a great solution from Bobvdd allowing ilogic control of the view rep in a part file (not an assembly file). The code below works brilliantly when the part file is the active document. However when the part is placed in an assembly and the ilogic is run with the assembly active, the code produces no result. How to modify the top 6 lines of code?
Dim oApp As Inventor.Application
oApp = ThisApplication
Dim oDoc As Document
[Code]....
How to change the view rep in an assembly
(using oAsmCompDef.RepresentationsManager.DesignViewRepresentations.Item("Red").activate) -
However I am trying to achieve the same with iLogic in a part file (multi-solid).
Basically I want to place parts and have them automatically connect to each other based on pre-existing UCSs on the assemblies. I have a 'ucs_in' and a 'ucs_out' on each assembly. I want the inserted component to perform a transformation to make the new occurrence's ucs_in to "mate" to the previous occurrences ucs_out. By mate I mean their center points are at the same location and all axes are pointing in the same direction. I have included screenshots to show what I'm working with and what I am trying to accomplish. I have also attached the project files.
Below is my attempt at the code to do this. My experience with transformations is limited so I may be way off from where I need to be.
Sub UcsMate() Dim doc As AssemblyDocument Set doc = ThisApplication.ActiveDocument 'assuming both occurrences are already in the assembly and both have 2 UCS, "ucs_in" and "ucs_out" Dim occ1 As ComponentOccurrence Dim
[Code]....
At my company we use part numbers as file names for everything. for example, part number 09090P00100000, will be saved as 09090P00100000.ipt and will have a drawing saved as 09090P00100000.idw.
Within the drawing template file, i want to set up an ilogic rule that will check that the part present in the drawing corresponds to the file name of the drawing. This rule will run after saving and will just display a warning if the file names do not correspond.
I just need some code that will get the file name of the part displayed in the drawing. Note that we use iparts so the code must get the member file name and not the factory file name.
Dim oDrawingDoc As DrawingDocument
oDrawingDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDrawingDoc.ActiveSheet
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
From a main assembly I am trying to change the visibility of occurence that are in a sub assembly. But everytime I change the visibility using the designviewrepresentation.setvisibilityofoccurrences(), that change the visibility of those occurrences in the other sub-assembly. Of course, if I do it thought the interface that works great. Anyone did something with changing visibility of sub component.
View 1 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I need to rename and replace occurences in an assembly, then modify the occurence name.I rename and replace only Farme generator components, which is tested by <condiftion>.What I want to do :
- Num = ABC
- Original filename = toto.ipt
- New filename = ABC_toto.ipt, and Occurence name = ABC_toto
The code :
fileDir contain the file path
docFName contain the original file name (for example, toto.ipt)
Num contain the prefix to add to the name and the occurence name (for example, ABC)
If <condition>Then
New_name = fileDir & Num & "_" & docFName
Call oFileNameOcc.SaveAs(New_name, True)
Call oOccurrence.Replace(New_name, False)
oOccurrence.name = Num & "_" & oOccurrence.name
End If
The problem is, the first time I use the macro, the prefix is added twice in the occurence name (the filename is ok) : I obtain ABC_ABC_toto. This happen only the first time, and only on an orrignal Frame Generator assembly.
If I use the macro again, with for example Num = 123, the result is : 123_ABC_ABC_toto.Where is the problem ?
I am trying to add instances of an ipart to an assembly automatically from an excel file and need to be able to specify the occurrence x, y, and z positions. Since the Inventor version is so old I have not been able to find the proper documentation.
View 1 Replies View Related