I have a couple of dozen features in my part, of which only one will be active at any time. The feature tree may be subject to additions, so I am looking for an ilogic rule that will first suppress all of the features in the part, and then switch on the specific feature I require (using a parameter). Any code to suppress ALL features?
View 9 RepliesI have set iLogic to change a rectangular pattern to a certain amount of occurrences depending on which is selected , i.e. 117 cavities, 140 cavities and 96 cavities. Only one is active (or unsuppressed ) at a time.
What I need to do is suppress the 4 corners of each pattern, considering there's only one pattern and is dynamic.
I have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I am trying to make a way that suppress the flange features of all the panels that will be insert in the assembly so i can suppress all the features at ones in a assembly and don't have to do that for each panel separately.
I have a assembly with parameters and i have a part with no geometry but have linked the parameters from the assembly. In my panel part i link the parameters to the part with no geometry.
When i use the parameter in the assembly to suppress the flanges that works the way i want it. But when i insert the panel part into that assembly it doesnot work.
The small cylinder was made first, then projected it to a sketch, made offset, and made the big cylinder, but i want to leave only the big cylinder alone. i want to suppress the small cylinder, but when i suppress the samll one both get suppressed.
How can i break this link, which was made by the projected geometry?
Even when i select the projected circle, right click and select Break Link, they still behave the same.
Is it possible to suppress an assembly feature in a drawing view?We make some components in an assembly oversized and then do a final machine step after welding or brazing. We show the completed assembly in the drawing but would like to see the assembly prior to machining in some views.If I suppress the machining features in the model it affects all views. Can we suppress the features in just one view?
View 6 Replies View RelatedI have a code working that is not very efficient.
It works, but it is very slow, i suspect it can be 28x faster, but I don't know how
What I have:
I have a plate with many hole patterns.
I calculated how many holes each pattern has
Parameters: Excel_Holes_Row_0 to Excel_Holes_Row 27
For each Row i have 4 features:
Pipe Hole
Rectangular array of Pipe Holes
Product Hole
Rectangular array of Product holes
What I want to do:
I want to suppress/unsuppress features with a rule
If Excel_Holes_Row_20 < 2 It means Suppress the rectangular arrays on this row
If Excel_Holes_Row_20 = 0 It means suppress the hole features on this row
This is my
Dim oDoc As Document = ThisDoc.Document
Dim PFeats As PartFeatures = oDoc.ComponentDefinition.Features
Dim PFeat As PartFeature
[Code]....
how to suppress a pattern in *.iam by ilogic?
I used ilogic to suppress the main components, but the rest are not suppressed.
For example, I have component "A" and make it a pattern (Colum and Row are variable). How to use ilogic to suppress rest not just "A".
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
Is there a way to put a bunch of imates under one line code?
I have imate iInsert:1 thru iInsert:49 I need them all suppressed when an event happens.
I can get it to work one by one but that would be a lot of code.
Tried a few other thing but seems not to work.
2012 Factory Design Suite ( will not load 2013)
Lets say you have 100 Keps Nuts in an assembly. Named (KepsNut1,KepsNut2, etc)And you want to suppress them on and off.
Would there be a way to make an array 1-100 and just say suppress/unsupress "KepsNut" & array list of numbers.To basically add the two strings and find all the components in that array and turn them off or on.!
I am trying to suppress part that are labeled as "Reference" on the BOM Strutcture and I can't get the program to cycle through the subassemblies. The following code runs through all the components on the top-level assembly but I can't get it to cycle through the subassemblies.
oCompDef = ThisDoc.Document.ComponentDefinitionoAssemblyComponents = oCompDef.OccurrencesDim oOccurrence As ComponentOccurrenceDim oSubOccurrence1 As ComponentOccurrenceFor Each oOccurrence In oAssemblyComponents If (oOccurrence.BOMStructure = BOMStructureEnum.kReferenceBOMStructure) Then Component.IsActive(oOccurrence.Name) = False Else Component.IsActive(oOccurrence.Name) = True End IfNext
How do you suppress a certain pattern occurence in Ilogic?
View 6 Replies View Relatedin addition to this question
[URL]......
What is the code for hiding different Solid Bodies:
with the User Parameter type, I want to select a certain type of Shackle and suppress / hide the other Solid Bodies.
Is it possible to suppress an occurrence of a pattern in part environment using iLogic? I saw something for assembly environment, but I can't make it work for part. My iLogic knowledge is quite basic.
View 1 Replies View RelatedI'm using I-logic to suppress components in an assembly. I've attached a screenshot with 3 suppressed components.
In the browser the parts are suppressed but in the BOM (items 6,7,9) they are not. Is there a piece of code for this?
I'm trying to use ilogic to suppress some individual elements of a pattern but i couldn't find any command that can target component pattern elements. When i try to capture its current state with the right click menu it does nothing.
I can of course suppress the part within the element but then it doesn't update the BOM.
I need to suppress a pattern in an 2nd level subassembly. But is only able to do it in the same level where the pattern is placed etc:
If Length < 3000 mm Then
Component.IsActive("1 st level subassembly", "Name of pattern in 1nd level subassembly") = False
End If
But if i do it with an MakePath... etc.:
If Length < 3000 mm Then
Component.IsActive(MakePath("1 st level subassembly", "2 nd level subassembly", "Name of pattern in 2nd level subassembly")) = False
End If
If Length < 3000 mm Then
Component.IsActive(MakePath("1 st level subassembly", "2 nd level subassembly"), "Name of pattern in 2nd level subassembly") = False
End If
is it not possible to suppress a pattern by an MakePath?
I want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
I am working on a standard part that has different configurations depending on user inputs into a GUI. Once the user enters all the required parameters, the part is in its final form with all unnecessary features suppressed. I am looking for a way to automate the delete of the suppressed features using a rule and i Logic before the user saves the file.
The main reason for doing this is to reduce the file size of the part once it is saved because this same template will be used for hundreds of parts and I don't want to waste unnecessary storage space on suppressed features.
how to suppress the Data Window from appearing after drawing a new feature? Most of the new features are populated with triggers and autonumbers, so I don't need to see the Data Window when I draw something new..
View 1 Replies View RelatedI'm now having an issue accessing the features in an assembly, the error message is attached and the following is the relative code.
The error line is between the 2 Test Messages:
'Create a Component Definition relative to the Part Document
Dim oFeature As Features
Dim oAssembly As AssemblyDocument
oAssembly = oCompOcc.Definition.Document
MsgBox("Test 1")
'Cycle through all features in the Part
For Each oFeature In oAssembly.ComponentDefinition.Features
MsgBox("Test 2")
I am currently designing a heat exchanger and want to adjust the number of water channel using iLogic. The number of channels to be active is based on the channel dimensions, and is calculated in my excel spreadsheet, but up to a maximum of 19. This is stored in the parameter "no_channel". Each channel is a seperate feature (extrusion) and named from "Channel 1" though "Channel 19".
My idea of doing this automation was to have iLogic suppress all the features, and then doing a closed loop to unsuppres the features I want active:
Feature.IsActive("Channel 1") = FalseFeature.IsActive("Channel 2") = False...Feature.IsActive("Channel 19") = FalseFor i = 1 To no_channelFeature.IsActive("Channel"(i)) = TrueNext
However, this gives me the following error:
Error in rule: Number of channels, in document: Radiator fin side.ipt
Feature.IsActive: No feature found with the name: "h".
I made an Part with iLogic rules, let's call it "iLogicPart". The rules inside could create lot of different part by my input.
I want save the different parts to different name as "Part 1", "Part 2", etc. I used SaveAs to get them.
My question is: I want to delete all rules and parameters in the saved parts as "Part 1", "Part 2". And I have lot of features (the name is hard to track) which are inactive, I want to delete them at same time too.
I could manually do so, but I want to use rule to do so automatically.
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
it's possible to create a derived part using only some of the features of the base components i.e. I've got a funny shaped part with a bunch of holes in it, and I need another part with exactly the same shape but totally different holes (location and size)I know you can do this with the different solids in the part (only use some of the solids) but I haven't been able to figure it out with features, if it's possible at all.
I could probably create one base part (just the shape) and derive both parts from that, but then I've got a part lying around doing jack.using IV 11.
I'm crating a macro wich would allow me to select multiple parts in an assembly and then calculate the length of each part. The parts are tubes wich are made of a sinlge sweep.
I started from the example truesweeplength, and built from there.
Now my problem is accessing the sweepfeature from the assembly.
In the part enviroment i use this:
Dim oDoc As PartDocument
Dim oDef As PartComponentDefinition
Dim osweepcount As Long
Set oDoc = ThisApplication.ActiveDocument
Set oDef = oDoc.ComponentDefinition
osweepcount = oDef.Features.SweepFeatures.Count
The sweepcount is simply to check how many sweep features are in the part.
This works fine in part level.Now from assembly level I first create an obecjtcollection from all the parts I selected
Set oOccurrences = ThisApplication.TransientObjects.CreateObjectCollection
Then I try to acces the first occurence
oDoc.SelectSet.Item(1)
But then I'm stuck. I cant find the way to acess the features of the selected part.
Is there a way to connect parameters from part1 to part 2 using iLogic, without using an assembly.
View 9 Replies View Relatedwhy I have a part file that is almost 12MB in size yet it contains absolutely no features? I would attach the part but it's too big to upload.
View 2 Replies View RelatedHow do you save features added in an assembly to the part? For example, if I add a hole in an assembly, presently I cannot see it when I open the part. It seems like a very basic function, I'm not sure why it doesn't do it automatically.
View 6 Replies View RelatedUsing inventor to calculate specific distances or counts of features on a part. Say for instance, the lineal feet of a radial edge, or the number of cutouts a part may have. If so, how are you approching this? Can be programs written with the API/iLogic or just general setup I am pretty versitle and open to any discussion.
View 6 Replies View RelatedHow do I delete work plane 1 from the attached part, 'test derived'?
workflow.
create a part, pattern a plane, save as 'test deriver'
create new part, derive work plane 1 from 'test deriver' sketch onto work plane 1, save as test derived
go back to 'test deriver, delete the pattern and create a new pattern, work plane 2, (i couldnt just edit it because the real life case was a series of patterns at different distances)
open part 'test derived', edit the derived part to include work plane 2, (work plane 1 doesnt exist in 'test deriver' anymore) redefine the sketch onto work plane 2
try to get rid of work plane 1 from the part?