I have a fabulous image of a painter's palette: [URL]
I want to show only parts of this image at a time, so that the viewer sees it in increments. However, I want to make the edges look more organic, like brush strokes, so that it looks almost as though the painting is being completed and the viewer gets to see the process.
p.s. I'm in CS2, unfortunately, so the bristle brush isn't an options
Anyway, I would like to use the Basic brush at half a pixel stroke and less like 0.25
However, when I type in 0.5 and then go to use the brush it just turns back to 1px
So, should I assume I cannot make a stroke smaller than 1px?
I have created a color gradient and the color fill has an uneven edge, which creates a small white space between the edges of the fill and the bounding box. I have tried using shift+click to try and even the edges, but I guess that only works for using stroke tool or whatever. You have to look closely because this image is not very large. There is a slight uneveness on both the top (near the right side) and bottom (slightly left of center).
View 14 Replies View RelatedIs there a way to make a custom vector brush smoothly meet at beginning and ending of the stroke, such as with a circle? I'm trying to create smooth circles with a brush and Wacom. I want a brush rather than a mathmatically perfect circle with a perfect stroke weight-thickness, but I don't like how the two beginning and ending join up. i like the slight variations of human imperfections one gets when using a vector brush, but there must be a way to make the joing points look more smooth, rather than an after-thought prgramming fault, right? Is it possible?
The image below shows my attempts to make as smooth a joint as possible, but it still looks too much like it wasn't meant-to-be.
I'm using Ai CS4, Mac OS10.8.4
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I have been having problems with uneven stroke borders on my images. If I select say, a 2px border, three sides of my image will have a 2px border while one side will have what appears to be a 4px border. Is this a known LR problem, or is it printer driver related ? Using LR 2.2 and printing on an Epson 3800, latest driver.
View 9 Replies View RelatedIm using a tablet. I want to make my brush stoke very very short. Previously, I would do this by setting the fade to a very small number. I think I used to set it to airbrush but possibly it worked in brush as well. (I cant even figure out how to select an airbrush now) How do I do this in 6?
View 3 Replies View RelatedI applied a 1pt stroke as you see in the screenshot and I gave it a default width profile. For some odd reason no matter what I do that stroke has sharp edges and isn't curved smoothly.
View 5 Replies View RelatedI'm trying to make a brush that has particle effects in the middle and a fading out gradient on the edges that looks like this:
View 5 Replies View RelatedOkay so I've browsed these forums and everybody keeps saying to turn off Align new Objects to pixel grid well I've done that and it still keeps resetting. I've been using a Print document since I am trying to draw illustrations for a children's book but somehow when I choose anything below 1 pt it keeps going back to 1 pt no matter what.
Opened up transform panel too but it's not checked and grayed out so I can not turn on / off again. I am using Adobe Illustrator CS5.
I am using Illustrator CS5 to build a logo that uses brush strokes. The strokes are translucent but I want them to be opaque. The setting for the stroke is 100% opaque. I can't find a way to change this. It seems like a glitch. I've used brush strokes many times before, but have never had this problem.
View 34 Replies View RelatedI'd like to scale a brush stroke. How do I do this?
Left is original stroke Right is resized by pressing shift then pulling box to upper right.
I found on the forum to tick preferences - scale strokes & effects but still not working?
I am new to Illustrator and am taking an Illustrator class. One of the excercises we are supposed to do is just tracing over a greyed-out image that is made up of one long brush stroke. the idea is to start at one end of this long stroke and follow all the curves, not letting up on the mouse button till the end. As the title states, we are using the paintbrush for this.
the brush quits putting out any color, even though I DO NOT let up on the mouse button! have tried and tried with the same result. So picture this...if you stretched this stroke out in a strait line, it might be 20 inches long, but i can only trace 10 inches of it before the paintbrush quits.
I have googled this to no avail. I am on a pc, but it is not just on one machine, as I have tried this on one Windows 8 desktop, a Windows 8 laptop, and a Windows 7 laptop, all using different mice as well. Both laptops have I7 chips with 4gigs of ram, and the desktop has a core 2 quad chip with 8 gigs of ram, so I dont think thats a problem. Just seems weird that its happening on all three machines.
Also, its not the file that Im tracing around either, because I can get the same result if I just open a new document and just start painting a long stroke before too long it quitsThis is happening in Illustrator CC. Class doesnt meet again for a week, so just thought I would ask here.
Why I can’t add a gradient to a brush stroke. As soon as I select the drawn brush stroke and I try playing around with the gradient, the whole stroke goes black…This is driving me nuts. And the weird thing the gradient can be applied only to the basic brush type…not the one that I need unfortunately. I’m not sure why that is…I can only add colour to the brush stroke but no gradient sadly. Is there something I’m doing wrong or a setting which prevents this from happening?
View 3 Replies View RelatedI traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
I'm using a basic custom brush which reacts to pressure, and whenever I make a brush stroke with my stylus, the line doesn't appear until I lift my pen off the tablet. It's a seemingly random occurence, although it occurs in both my work (CS6 / Win7 / Intuos3) and home (CS6 / Win8 / Intuos4) setups.
View 8 Replies View RelatedI don't seem to be able to change my stroke in brush or pencil. It keeps resetting back to basic stroke 1pt/basic/uniform. The only way I seem to be able to go around this problem is to first paint something and then select the stroke and choose the stroke width, etc., but that's too time consuming and very difficult to work. I am using CS 5. "New Art Has Basic Appearance" is unchecked.
View 3 Replies View RelatedA path automatically goes basic(1) weight when any brush is applied to it. Is there any way to avoid this?
View 3 Replies View Relatedi have created a stroke with a calligraphy brush. Now i want to make the stroke a bit thinner at some points of the path.
It could be easily done with the width tool but it doesn't work directly on the stroke.
Is there a way to convert the stroke so the thickness of the stroke will be kept at the other points?
I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
View 2 Replies View RelatedIt seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies View RelatedThis was not an issue in CS5, and I can't figure out how to change it in CS6. I like to Illustrate with the Pencil Tool. I set the stroke to width profile 1 (tapered on both ends) and the stoke to whatever makes sense for my current project, and it keeps changing back to Uniform and 1pt. I have tried to get my settings to "stick" with the Pencil Tool and Brush Tool, and have had no luck. The only way I can change the stroke profile is to do it AFTER the stoke is made.
View 2 Replies View RelatedI have several brush styles that I routinely distort with custom stroke profiles. Unfortunetly, every time I change the brush style, the profile is lost. Can I prevent this from happening?
View 2 Replies View RelatedI'm trying to match the style of an illustration done by someone outside my company; all the lines taper at both the ends like an actual brush stroke, but when I used the brush tools I have to change the angle to get the tapered look - is there a trick to this? It's not efficient to have to stop and change the angle of the tool for every stroke -
View 7 Replies View RelatedIn Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies View RelatedI recently purchased premier pro 6 after working with Inkscape and GIMP for awhile. I am trying to figure out some things that I used to be able to do in Inkscape. In Inkscape, you could change the thickness of a calligraphy stroke based on the speed that the cursor moved. It was called "thinning".
View 2 Replies View RelatedI am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 Replies View RelatedWhat do you think you be the right way to make a surface rough and uneven, as in the picture below? Or should it be done at some later stage?
View 6 Replies View RelatedI have been a Photoshop hobbyist. Now I own a printing business. This has forced me into the world of Illustrator for our printing and cutting machines. Although I am very comfortable with PS, Illustrator. One of the key things is making "Cut lines" in Illustrator to send to the cutting program. Now here is my dillema, all of my images I have made are in Photoshop. To make these cut lines I have to stroke the image. When I bring a picture into Illustrator I can not get it to stroke that picture. It just strokes the box around it, or unless I draw a circle or shape around it and stroke that shape. Please refer to the picture I have attached. The first one is a decal that we initially made. The second is the image that I want to stroke for cut lines do I can just have that as a decal without the white circle.
View 1 Replies View RelatedI want the stroke above the elipse to be an eyelid for a cartoon. I want the part of the elipse to disappear that meets the stroke "eyelid" (see the left image).
I want the eyeball elipse to disappear as it goes into the eyelid stroke.
The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
