I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
View 2 RepliesIt seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies View RelatedIs there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View Relatedhow to make dotted lines around a shape and when it comes to the point where i have to grab the pen tool right click and select stroke path..its light gray and not clickable. why can't i select it?
View 1 Replies View RelatedI created a brush and I have created a path. What I want to happen is for the brush to follow the path and keep the angle of the path. What I mean is the brush should stay perpendicular to the path. So that on angles...the brush takes that angle. Does that make sense? Let me explain exactly what I have done. I created a brush that is just a rectangle that is about 1px wide and about 7px tall. I have created a path around some text. I want the brush to follow the path around so that it looks like stitching. But what is happening is on the vertical sides..the brush is staying vertical.
View 5 Replies View RelatedI have used the pen tool, in path mode, to draw a path. When I right click and select "stroke path" and then set it to brush, I am just getting dots at my anchor points, and no solid line over the entire path I drew with the pen.
View 2 Replies View Relatedgot a problem that I can't figure out...
In cs5 i could stroke the path based on the brush size/shape when i choose "brush" and simulate pressure to get those nice faded out lines.
In cs6 I do the same thing but the stroke size never changes to the brush size even when i make sure "brush" is selected.
Second question... I want to add some lights with Knoll Light Factory; is there a way to preview the lens flare on top of all the current layers to see what it will look like? Sometimes i'm trying to position it on top of a very specific area. I know I can change the background layer to the specific place, but getting a full preview would be great.
PS CS2, Win XP
I created a brush representing a period of a tyre tread. I want to stroke path a path with it to make it look like a tire mark: >>>>>>>>>>>>>. My problem is the single brush marks are distributed far too close together.
Where in brush palette or wherever can I make the parameters fit?
Is there a way so that, when I finish painting a Brush stroke, it automatically becomes selected? Or something else having the same effect?
View 1 Replies View RelatedI'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
Is there a way in Photoshop to gradually decrease the width of the brush stroke along a path? Like a classic lightning bolt...
View 3 Replies View RelatedFor some reason I can't select the "stroke path" option with the pen tool in photoshop to add tapers to my pen tool strokes. I can only get dead lines. why is this not working?
View 4 Replies View RelatedNot able to apply gradient along or across stroke of an outline of a shape or a line drawn with the pen tool using Illustrator CC.
View 3 Replies View RelatedIt seems that all these gradients-in-stroke options are only available for strokes that are aligned to the center of the path. I have tried to set inside and outside strokes, but i cannot for the life of me activate the right two options (even though they look like i can click on them).
Gradient-in-stroke options:
Updated Illustrator to CC and now my apply gradient to stroke is acting funny (also does it with apply along stroke). First i can't get it to show up unless I find a number it likes (start out with 1 pt, don't see a stoke so increase size 1 pt at a time up to 11 to see it) now the corners have gotten strange, They seem to be missing small patches. You can see in the image I am not doing anything fancy, it's type and then just to make sure it wasn't a font problem I tried just a rectangle. It seems to be worst with corner set to round joint.
View 16 Replies View RelatedI selected the line and wanted to apply gradient across the stroke, but why it is greyed out?
View 2 Replies View RelatedI can't set the stroke of a path to anything less than 1 pt.
Though a dragged path (by an endpoint) snaps to a point on another path, when I lift my finger, the dragged point and path jump a small distance away.
Aligning two separate paths to their common (e.g. top left) endpoints also leaves the two endpoints slightly displaced from each other.
I mostly use photoshop for lineart on some pictures I do but the biggest problem is that the lines are not really smooth. I want to Use Illustrator just to ink the pen tool paths and then return it to photoshop to color. This is a recently finished picture I did using the Pen tool traced on top of a sketch I scanned. I want to know if there is any way I could do something similar to "Stroke path" in Illustrator so that I could get this picture done with crisper lines and if not.
View 2 Replies View RelatedFor example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies View RelatedIs it possible to select all objects with a particular characteristic, such as a specific stroke width? I know I can do this by selecting one object and then choosing select all. But I want to include this as part of a batch action, so I need to be able to specify the selection in such a way that it can be completely automated. If I have to select one of the objects for each file, it defeats the purpose of the batch action.
View 2 Replies View RelatedThere is one elementary thing about Illustrator CS6 that I don’t understand. Do the following:
-Select Pencil Tool. Make three strokes at random and select them.
-Apply a brush to them, for instance a Calligraphic Brush 5 pt. Oval.
-Deselect the strokes.
-Doubleclick the same brush on the Brushes Panel in order to edit it.
-Choose Preview to see changes.
-Change the brush size to 20 point. The three strokes will change in size, as they are supposed to.
-Click OK. A warning dialog box appears. Click Apply To Strokes.
Now what happens? THE CHANGES DO NOT APPLY TO THE STROKES. They turn back from 20 to 5 pt. Why? Try, on the other hand, to make the entire procedure without selecting Preview. Now the process runs perfectly; the change to 20 pt. is applied to the strokes. My question is: why does Preview spoil the process?
Okay so I've browsed these forums and everybody keeps saying to turn off Align new Objects to pixel grid well I've done that and it still keeps resetting. I've been using a Print document since I am trying to draw illustrations for a children's book but somehow when I choose anything below 1 pt it keeps going back to 1 pt no matter what.
Opened up transform panel too but it's not checked and grayed out so I can not turn on / off again. I am using Adobe Illustrator CS5.
I am using Illustrator CS5 to build a logo that uses brush strokes. The strokes are translucent but I want them to be opaque. The setting for the stroke is 100% opaque. I can't find a way to change this. It seems like a glitch. I've used brush strokes many times before, but have never had this problem.
View 34 Replies View RelatedI'd like to scale a brush stroke. How do I do this?
Left is original stroke Right is resized by pressing shift then pulling box to upper right.
I found on the forum to tick preferences - scale strokes & effects but still not working?
I am new to Illustrator and am taking an Illustrator class. One of the excercises we are supposed to do is just tracing over a greyed-out image that is made up of one long brush stroke. the idea is to start at one end of this long stroke and follow all the curves, not letting up on the mouse button till the end. As the title states, we are using the paintbrush for this.
the brush quits putting out any color, even though I DO NOT let up on the mouse button! have tried and tried with the same result. So picture this...if you stretched this stroke out in a strait line, it might be 20 inches long, but i can only trace 10 inches of it before the paintbrush quits.
I have googled this to no avail. I am on a pc, but it is not just on one machine, as I have tried this on one Windows 8 desktop, a Windows 8 laptop, and a Windows 7 laptop, all using different mice as well. Both laptops have I7 chips with 4gigs of ram, and the desktop has a core 2 quad chip with 8 gigs of ram, so I dont think thats a problem. Just seems weird that its happening on all three machines.
Also, its not the file that Im tracing around either, because I can get the same result if I just open a new document and just start painting a long stroke before too long it quitsThis is happening in Illustrator CC. Class doesnt meet again for a week, so just thought I would ask here.
Why I can’t add a gradient to a brush stroke. As soon as I select the drawn brush stroke and I try playing around with the gradient, the whole stroke goes black…This is driving me nuts. And the weird thing the gradient can be applied only to the basic brush type…not the one that I need unfortunately. I’m not sure why that is…I can only add colour to the brush stroke but no gradient sadly. Is there something I’m doing wrong or a setting which prevents this from happening?
View 3 Replies View RelatedAnyway, I would like to use the Basic brush at half a pixel stroke and less like 0.25
However, when I type in 0.5 and then go to use the brush it just turns back to 1px
So, should I assume I cannot make a stroke smaller than 1px?
I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
[URL]....
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.Increase the stroke weight of the elipse.Control-Z to undo.Decrease the stroke weight of the elipse.The above demonstrates I know how to adjust the path weight (at least I think it does).Next, on the path that doesn't allow the stroke width to be reduced: Select path. Increase stroke weight to demonstrate it increases.Control-Z to undo.Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
What do I need to do to decrease the weight of the path I am trying to adjust?
i have a line art drawing and have expanded the strokes to paths. now i'd need to turn part of the paths back to strokes and can't find an (easy) way to do it.
inserted is an example of the situation. instead of closed path i'd like the form to be a stroke.
If I wanted to change an objects stroke (outline) color for just part of the object, what would be the best way to go about that. Pro tip: Paint bucket tool in photoshop != the best way... it gets all pixel.
View 4 Replies View Related