Illustrator :: How To Adjust Stroke Weight On Path
Jul 21, 2012
I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
[URL]....
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.Increase the stroke weight of the elipse.Control-Z to undo.Decrease the stroke weight of the elipse.The above demonstrates I know how to adjust the path weight (at least I think it does).Next, on the path that doesn't allow the stroke width to be reduced: Select path. Increase stroke weight to demonstrate it increases.Control-Z to undo.Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
What do I need to do to decrease the weight of the path I am trying to adjust?
View 9 Replies
ADVERTISEMENT
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Sep 3, 2012
I got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
View 5 Replies
View Related
May 23, 2013
How can I have the second panel in Illustrator for Mac? At the moment, I'm stuck with a single-option panel, only allowing to change 'weight'...
View 1 Replies
View Related
Feb 10, 2014
I don't know what I'm doing wrong, but every now and then, my stroke weight rounds up. When I try to make the stroke 1.5 pts, Illustrator automatically rounds up the stroke weight to an even "2". This is very annoying when I need the line to be 1.5.
It doesn't always happen, but it drives me crazy when it does. what I've turned on, and how I can turn it off?
View 1 Replies
View Related
Aug 19, 2010
Is there a keyboard shortcut to change stroke weight? Increase and decrease.
If there isn't , then any way to write a script or something else, to make this hotkey.
I found this thread: [URL]....but the link to script is dead.
View 25 Replies
View Related
Dec 3, 2012
I am clicking on a line and altering it's stroke weight to numbers as big as 70pt, but the there is no visible change to the line! If I click off the line and back on it, it still says that it is 70pt, but this is not apparent! Have i clicked on something that prevents me from altering the line weights?
View 1 Replies
View Related
Aug 7, 2013
How do I convert the stroke weight in Ai6 from inches to pt.?
View 1 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Aug 28, 2013
I am using a Mac running 10.8.4 and Illustrator CS6, on new documents I can not get the stroke or line weight below .0139”. I set the weight manually but it returns to .0139”, the weight will increase just will not go below .0139”. Any document that was drawn in CS2 retains its weight settings and I can even draw new items and have any line weight down to .001”. I can not go that low in a new document. All setting appear to be the same.
View 4 Replies
View Related
Sep 5, 2013
I'd like to know how to ignore the stroke weight of a shape in the transform box. In other terms, to only consider the surface.
For example, I trace a square with no stroke, and measures 100mm. When I add a 1pt stroke on it, I would still like the transform box to display 100mm, and not 100,353 mm.
I'm working on Illustrator CC (64 bit), Windows 7.
View 2 Replies
View Related
Dec 29, 2012
A path automatically goes basic(1) weight when any brush is applied to it. Is there any way to avoid this?
View 3 Replies
View Related
Jul 7, 2013
For some reason I cannot create a line weight/stroke under 1pt in Illus CS6. I will select 0.5pt but the selection keeps defaulting back to 1pt. I deleted my preferences, but didn't work. How can I fix?
View 1 Replies
View Related
Mar 5, 2014
I'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
View 14 Replies
View Related
Oct 22, 2013
I've used image trace to trace the outline of a street grid and expanded the trace into paths. However, after doing so, I realized I wanted the streets a bit thicker, so I increased the stroke value.
Is there a way to adjust the old paths to match the new outline? I tried saving it as a .jpg and retracing but the quality was subpar. Any way to "redo" the trace in the original file, or somehow tell Illustrator to move the paths to match the increased stroke? I need them to coincide once more with the edges of the streets. URL...
View 3 Replies
View Related
Dec 14, 2012
I'm looking for an existing, or a way to create, a shortcut that will adjust the stoke width in Illustrator as I draw. Something similar to the bracket key in Photoshop for changing brush size on the fly.
View 3 Replies
View Related
Aug 23, 2013
I can't set the stroke of a path to anything less than 1 pt.
Though a dragged path (by an endpoint) snaps to a point on another path, when I lift my finger, the dragged point and path jump a small distance away.
Aligning two separate paths to their common (e.g. top left) endpoints also leaves the two endpoints slightly displaced from each other.
View 6 Replies
View Related
Nov 6, 2012
I mostly use photoshop for lineart on some pictures I do but the biggest problem is that the lines are not really smooth. I want to Use Illustrator just to ink the pen tool paths and then return it to photoshop to color. This is a recently finished picture I did using the Pen tool traced on top of a sketch I scanned. I want to know if there is any way I could do something similar to "Stroke path" in Illustrator so that I could get this picture done with crisper lines and if not.
View 2 Replies
View Related
Jul 30, 2013
For example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies
View Related
Jan 22, 2014
i have a line art drawing and have expanded the strokes to paths. now i'd need to turn part of the paths back to strokes and can't find an (easy) way to do it.
inserted is an example of the situation. instead of closed path i'd like the form to be a stroke.
View 6 Replies
View Related
Jan 29, 2013
If I wanted to change an objects stroke (outline) color for just part of the object, what would be the best way to go about that. Pro tip: Paint bucket tool in photoshop != the best way... it gets all pixel.
View 4 Replies
View Related
Sep 10, 2013
If I have an object that has a large stroke set to align to inside and I outline that stroke, the resulting inner shape isn't a closed path. While this is easy enough to fix, I was wondering if there was a way to avoid it alltohether?
View 5 Replies
View Related
Aug 27, 2013
I'm having trouble making adjustments to my compound path/shape, as I'd like to outline the inside of the shape with a stroke - but this doesn't seem possible as the stroke always surrounds the outside too.
So: I've got a simple rectangle with white fill, with a rectangle-window hole cut out of it using the compound path action so you can see the layers beneath. Now I want to stroke the window hole, but NOT the outside of the entire rectangle. I'd be happy to split the shape up and tried various options like divide, edit in isolation mode, expand (button is greyed out), all the pathfinders - but none of them allow me to do this only to the inside part of the path.
How I can perform this action? I'm working in CS5 and CS6.
View 6 Replies
View Related
Aug 12, 2013
Drew a path in Illustrator - made it a compound path. Made a clipping mask with another object inside it. When saved as a pdf, there are these strange white gaps in the stroke of the path.....
View 4 Replies
View Related
Aug 22, 2013
I am trying to create a circle where I can align a stroke to the outside of a path - however I need to be able to break the circle up into sections - once I do that - I cant align to outside anymore.
Aside from breaking the green section apart and aligning it manually by eye, is there no other way to do this? Perhaps by aligning all segments of the circle to another circle (one that hasnt been broken apart?)
View 10 Replies
View Related
Nov 2, 2013
I'm actually about to punch my computer screen. Ok so say I draw up a triangle with the pen tool
Then i hit the colour option
it changes to 1pt
So I change the weight to 0pt. How I want it, but then the NEXT time i draw up another path or whatever, and hit the colour option it goes to 1pt again!!! this is so fricking annoying i'm about to jump off a cliff ?
View 3 Replies
View Related
Feb 11, 2014
I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
View 2 Replies
View Related
Apr 6, 2013
I'm using Illustrator CS6.I'm working with closed paths on an illustrated character. I have a leg overlapping a body for example. The leg is essentially a 4 sided shape but I only want a stroke on 3 sides. On the 4th side I don't want a stroke on it so that the leg blends with the body. I first thought about using the shape builder tool to merge the 2 shapes to see what that would look like but they won't merge for some reason.
Then I tried to use the width tool to drop the stroke on the 4th side down to a 0 width for the side I want ... but that didn't work either.how I can change a closed shape so that a section of the shape has a different stroke colour (i.e. none!) from the rest of the shape?
View 14 Replies
View Related
Mar 4, 2014
So i've got a stroke in a circular path. I use the scissor tool and cut a segment of it out. Now, i want to move one of the end points up and have the anchor points after it follow the movement to keep the smooth line. I think Flash had a tool like this. It allowed you to manipulate one point that would affect the whole path depending on how extreme or what direction you went.
View 1 Replies
View Related
Dec 26, 2013
It seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies
View Related
Feb 6, 2014
I just thought I would ask... and it may be impossible... Is there a way to convert text to a stroke/strokes instead of a filled path?
View 10 Replies
View Related
