Illustrator :: Varying Stroke Color Used In A Section Of Closed Path
Apr 6, 2013
I'm using Illustrator CS6.I'm working with closed paths on an illustrated character. I have a leg overlapping a body for example. The leg is essentially a 4 sided shape but I only want a stroke on 3 sides. On the 4th side I don't want a stroke on it so that the leg blends with the body. I first thought about using the shape builder tool to merge the 2 shapes to see what that would look like but they won't merge for some reason.
Then I tried to use the width tool to drop the stroke on the 4th side down to a 0 width for the side I want ... but that didn't work either.how I can change a closed shape so that a section of the shape has a different stroke colour (i.e. none!) from the rest of the shape?
View 14 Replies
ADVERTISEMENT
Nov 14, 2013
I'm using Illustrator CC. When I draw an outline with either the pencil tool or the paintbrush tool, I can't fill it in with color, even though the path appears to be closed. The "fill" square has a red diagonal line through it and won't switch to a color.
View 11 Replies
View Related
Jan 29, 2013
If I wanted to change an objects stroke (outline) color for just part of the object, what would be the best way to go about that. Pro tip: Paint bucket tool in photoshop != the best way... it gets all pixel.
View 4 Replies
View Related
Sep 27, 2013
i want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
i searched all over the net for answers with no success.
View 4 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Apr 10, 2012
I have used PEDIT to join multiple polylines, which now appear as polylines. But when I use QSELECT to show all open (non-closed) section, one polyline still shows up as open.
I've attached the file I'm working on. The polyline in question is the green outline on the object on the right.
View 4 Replies
View Related
May 23, 2013
brushstrokes.png
I've noticed that sometimes when I use an artistic media brush around a closed path, I can't change the brushstroke color without filling the path with that color; see the attached file for an example. I thought that was just unfortunately the way it was.But today I watched Jeff Harrison's video tutorial [URL]...about making a custom brush. He applies it to a closed path, and then, to my surprise, he changes the color and it just changes the color of the brushstroke.
I followed the tutorial, made the brush, applied it to a rounded rectangle, all fine. However, when I changed the color, the center of the rectangle filled with the color as well as changing the brush color, as it always has for me in the past. So what's wrong? Do I have some setting somewhere set to the wrong thing? (I don't have Fill Open Curves checked.)
View 8 Replies
View Related
Feb 1, 2014
Do I need to create a closed path first? Don't know how.
View 1 Replies
View Related
Mar 20, 2013
I am developing a plugin for Illustrator CS5, 6. I have a scenario which requires the plugin to place a text frame inside a closed path art. How can I calculate the proper destination coordinates? The path art can be a curve or a rectangle, any shape. I need to place the text frame inside the path such that no part of the text frame overlaps the boundaries of the path art.
I looked at the forum and found the following thread: [URL] .....
Here, its stated that the method AIPathfinderSuite::DoFrontMinusBackEffect of the API did the required task. I tried the same but couldn't get it to work.
My first preference is to use the Illustrator SDK, not any third party libraries.
View 2 Replies
View Related
Jan 30, 2013
I have a stringy object which is a single closed path. The fill disappears where it overlaps itself. Can I prevent that?
View 4 Replies
View Related
Jan 31, 2014
Draw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
View 3 Replies
View Related
Mar 9, 2014
I've made a pattern brush that I'm using to simulate a woods line for a boardgame map:
Shown above is the unstroked bounding box as well. To use this brush, I draw an outline of a woods mass with the pencil tool, then apply the brush and Expand Appearance. At that point I'm hoping the brush sections will join into one closed path so that I can fill it with a woodsy green, but instead the fill gets applied to each section of brush independently:
The join points seem fine - it's not like the two ends of the brush don't line up at all: EDIT - Actually, that's not just one point in the middle there - that's the ends of both paths lying almost on top of each other. It's possible to separate the two and then ctrl-J join them. Problem is, I want that single path automatically.
So how to get Illustrator to treat the resulting path as one closed path instead of a compound path?
View 3 Replies
View Related
Nov 4, 2012
I have an open path in Photoshop CS4. When I go to stroke the path, Photoshop makes a stroke that closes the path from end to end. I want to stroke just the path with a specified stroke width in a specific color.
View 2 Replies
View Related
Oct 23, 2012
I seem to come unstuck when I apply colour using the 'Stroke Path' option. Basically I need to know if there's a way of determining the opacity of the stroke line? In some cases I don't need to have such a 'dense' colour. I want to see a little of what I've 'painted over' so as to keep some of the detail.
View 3 Replies
View Related
Jul 29, 2013
I have made a circular crest type image with a uniquely defined stroke (so it looks like a stamp). I want only the outside of the stroke to be bump and the inside be smooth (of the circle). Before I was just layering other white circles over it but now I need the inside to be transparent. Is there a way I can convert my stroke into an object so I can easily erase the bumpy inside? How else can I get around this? Top image is what I have, bottom image is what I want. Only to have a transparent center.
View 5 Replies
View Related
Aug 23, 2013
I can't set the stroke of a path to anything less than 1 pt.
Though a dragged path (by an endpoint) snaps to a point on another path, when I lift my finger, the dragged point and path jump a small distance away.
Aligning two separate paths to their common (e.g. top left) endpoints also leaves the two endpoints slightly displaced from each other.
View 6 Replies
View Related
Nov 6, 2012
I mostly use photoshop for lineart on some pictures I do but the biggest problem is that the lines are not really smooth. I want to Use Illustrator just to ink the pen tool paths and then return it to photoshop to color. This is a recently finished picture I did using the Pen tool traced on top of a sketch I scanned. I want to know if there is any way I could do something similar to "Stroke path" in Illustrator so that I could get this picture done with crisper lines and if not.
View 2 Replies
View Related
Jul 30, 2013
For example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies
View Related
Jul 21, 2012
I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
[URL]....
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.Increase the stroke weight of the elipse.Control-Z to undo.Decrease the stroke weight of the elipse.The above demonstrates I know how to adjust the path weight (at least I think it does).Next, on the path that doesn't allow the stroke width to be reduced: Select path. Increase stroke weight to demonstrate it increases.Control-Z to undo.Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
What do I need to do to decrease the weight of the path I am trying to adjust?
View 9 Replies
View Related
Jan 22, 2014
i have a line art drawing and have expanded the strokes to paths. now i'd need to turn part of the paths back to strokes and can't find an (easy) way to do it.
inserted is an example of the situation. instead of closed path i'd like the form to be a stroke.
View 6 Replies
View Related
Sep 10, 2013
If I have an object that has a large stroke set to align to inside and I outline that stroke, the resulting inner shape isn't a closed path. While this is easy enough to fix, I was wondering if there was a way to avoid it alltohether?
View 5 Replies
View Related
Aug 27, 2013
I'm having trouble making adjustments to my compound path/shape, as I'd like to outline the inside of the shape with a stroke - but this doesn't seem possible as the stroke always surrounds the outside too.
So: I've got a simple rectangle with white fill, with a rectangle-window hole cut out of it using the compound path action so you can see the layers beneath. Now I want to stroke the window hole, but NOT the outside of the entire rectangle. I'd be happy to split the shape up and tried various options like divide, edit in isolation mode, expand (button is greyed out), all the pathfinders - but none of them allow me to do this only to the inside part of the path.
How I can perform this action? I'm working in CS5 and CS6.
View 6 Replies
View Related
Aug 12, 2013
Drew a path in Illustrator - made it a compound path. Made a clipping mask with another object inside it. When saved as a pdf, there are these strange white gaps in the stroke of the path.....
View 4 Replies
View Related
Aug 22, 2013
I am trying to create a circle where I can align a stroke to the outside of a path - however I need to be able to break the circle up into sections - once I do that - I cant align to outside anymore.
Aside from breaking the green section apart and aligning it manually by eye, is there no other way to do this? Perhaps by aligning all segments of the circle to another circle (one that hasnt been broken apart?)
View 10 Replies
View Related
Sep 3, 2012
I got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
View 5 Replies
View Related
Nov 2, 2013
I'm actually about to punch my computer screen. Ok so say I draw up a triangle with the pen tool
Then i hit the colour option
it changes to 1pt
So I change the weight to 0pt. How I want it, but then the NEXT time i draw up another path or whatever, and hit the colour option it goes to 1pt again!!! this is so fricking annoying i'm about to jump off a cliff ?
View 3 Replies
View Related
Feb 11, 2014
I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
View 2 Replies
View Related
Mar 4, 2014
So i've got a stroke in a circular path. I use the scissor tool and cut a segment of it out. Now, i want to move one of the end points up and have the anchor points after it follow the movement to keep the smooth line. I think Flash had a tool like this. It allowed you to manipulate one point that would affect the whole path depending on how extreme or what direction you went.
View 1 Replies
View Related
Dec 26, 2013
It seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies
View Related
