Okay so I've browsed these forums and everybody keeps saying to turn off Align new Objects to pixel grid well I've done that and it still keeps resetting. I've been using a Print document since I am trying to draw illustrations for a children's book but somehow when I choose anything below 1 pt it keeps going back to 1 pt no matter what.
Opened up transform panel too but it's not checked and grayed out so I can not turn on / off again. I am using Adobe Illustrator CS5.
This was not an issue in CS5, and I can't figure out how to change it in CS6. I like to Illustrate with the Pencil Tool. I set the stroke to width profile 1 (tapered on both ends) and the stoke to whatever makes sense for my current project, and it keeps changing back to Uniform and 1pt. I have tried to get my settings to "stick" with the Pencil Tool and Brush Tool, and have had no luck. The only way I can change the stroke profile is to do it AFTER the stoke is made.
i click on the brush and change its color and or size then, when I go to paint it goes back to previous settings. (after that I can change its setting and it will work, but I always have to make a mark with the settings I don't want before I can change it to desired settings)
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I'm working on a reflective drawing and using gradients on strokes. I've been using pressure sensitive calligraphic brushes I made. Now I'm trying to use variable width preset profile brushes. It works fine for the first stroke, but every time I make a new stroke, it reverts back to a calligraphic pressure brush. How can I keep my brushes the same profile until I manually select it to be different? I've gone back and forth between the brush tool and pencil tool and neither will keep any basic variable width profile past the first stroke. I have to select every brush stroke and change it again and again after drawing it.
I’m using Adobe Illustrator CS6 with a mouse rather than a pressure graphics tablet.
When I create a stroke using the Paint brush tool I would like the stroke to contain a variable width profile. For example narrower at the beginning and end of the stroke but thicker in the middle. Now I can do this by selecting the line after I have made the stroke and choosing the Basic Brush Definition from the drop down list. But if i try to draw a new line the settings are reset again. I cannot create a variable stroke while creating the stroke. The brush definition keeps resetting to 5 pt Round and stroke width 1 pt. It would be much quicker if the stroke remained as a varying width profile as I created the strokes.
I noticed the same problem with the blob brush tool except it's even worse. With the blob brush tool the stroke weight always resets regardless of whether or not I try to set a Variable width profile.
I tried deselecting "New Art has Basic Appearance" mentioned on another forum but that didn't work.
[URL]
Notice the variable width profile is maintained as the artists draws. It doesn’t keep resetting.
I am using Illustrator CS5 to build a logo that uses brush strokes. The strokes are translucent but I want them to be opaque. The setting for the stroke is 100% opaque. I can't find a way to change this. It seems like a glitch. I've used brush strokes many times before, but have never had this problem.
I am new to Illustrator and am taking an Illustrator class. One of the excercises we are supposed to do is just tracing over a greyed-out image that is made up of one long brush stroke. the idea is to start at one end of this long stroke and follow all the curves, not letting up on the mouse button till the end. As the title states, we are using the paintbrush for this.
the brush quits putting out any color, even though I DO NOT let up on the mouse button! have tried and tried with the same result. So picture this...if you stretched this stroke out in a strait line, it might be 20 inches long, but i can only trace 10 inches of it before the paintbrush quits.
I have googled this to no avail. I am on a pc, but it is not just on one machine, as I have tried this on one Windows 8 desktop, a Windows 8 laptop, and a Windows 7 laptop, all using different mice as well. Both laptops have I7 chips with 4gigs of ram, and the desktop has a core 2 quad chip with 8 gigs of ram, so I dont think thats a problem. Just seems weird that its happening on all three machines.
Also, its not the file that Im tracing around either, because I can get the same result if I just open a new document and just start painting a long stroke before too long it quitsThis is happening in Illustrator CC. Class doesnt meet again for a week, so just thought I would ask here.
Why I can’t add a gradient to a brush stroke. As soon as I select the drawn brush stroke and I try playing around with the gradient, the whole stroke goes black…This is driving me nuts. And the weird thing the gradient can be applied only to the basic brush type…not the one that I need unfortunately. I’m not sure why that is…I can only add colour to the brush stroke but no gradient sadly. Is there something I’m doing wrong or a setting which prevents this from happening?
I traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
I'm using a basic custom brush which reacts to pressure, and whenever I make a brush stroke with my stylus, the line doesn't appear until I lift my pen off the tablet. It's a seemingly random occurence, although it occurs in both my work (CS6 / Win7 / Intuos3) and home (CS6 / Win8 / Intuos4) setups.
I don't seem to be able to change my stroke in brush or pencil. It keeps resetting back to basic stroke 1pt/basic/uniform. The only way I seem to be able to go around this problem is to first paint something and then select the stroke and choose the stroke width, etc., but that's too time consuming and very difficult to work. I am using CS 5. "New Art Has Basic Appearance" is unchecked.
I have a fabulous image of a painter's palette: [URL]
I want to show only parts of this image at a time, so that the viewer sees it in increments. However, I want to make the edges look more organic, like brush strokes, so that it looks almost as though the painting is being completed and the viewer gets to see the process.
p.s. I'm in CS2, unfortunately, so the bristle brush isn't an options
I'm trying to select a portion of a path by using the direct selection tool and shift clicking on the anchor points. But when I click and drag the brush over onto the path, the brush stroke is applied to the entire path..... which I dont want to happen. I only want it applied to the section of the path.
I have several brush styles that I routinely distort with custom stroke profiles. Unfortunetly, every time I change the brush style, the profile is lost. Can I prevent this from happening?
I'm trying to match the style of an illustration done by someone outside my company; all the lines taper at both the ends like an actual brush stroke, but when I used the brush tools I have to change the angle to get the tapered look - is there a trick to this? It's not efficient to have to stop and change the angle of the tool for every stroke -
In Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
I recently purchased premier pro 6 after working with Inkscape and GIMP for awhile. I am trying to figure out some things that I used to be able to do in Inkscape. In Inkscape, you could change the thickness of a calligraphy stroke based on the speed that the cursor moved. It was called "thinning".
I am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
Is there a way to make a custom vector brush smoothly meet at beginning and ending of the stroke, such as with a circle? I'm trying to create smooth circles with a brush and Wacom. I want a brush rather than a mathmatically perfect circle with a perfect stroke weight-thickness, but I don't like how the two beginning and ending join up. i like the slight variations of human imperfections one gets when using a vector brush, but there must be a way to make the joing points look more smooth, rather than an after-thought prgramming fault, right? Is it possible?
The image below shows my attempts to make as smooth a joint as possible, but it still looks too much like it wasn't meant-to-be.
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
I have been continuously since buying CS5/Illustrator. Our company had its logo designed by another firm, and it has been my job to use it in brochures and marketing collateral. The logo uses a two instances of a radial gradient applied to two separate elements of the logo. The gradients are off-center. However, when I place the file into a document, save, close and re-open, boom! the gradient is reset to center, throwing off the logo. This has happened when I have least expected it, and even resulted in a very expensive reprint.
I have converted the file to different formats: EPS, JPEG and PDF, but with the first, there is a loss of image quality, and with PDF, the gradient still moves out of place.
Im trying to reset illustrator Preferences with the shortcut option+command+shift but its not working, it worked with photoshop but with illustrator its not working why ?
also in CS6 where to find illustrator Preferences file to delete them in case short cut dont works
I have Illustrator CC (at the moment I am using the trial version), and I have used it a few times. The only problem is that every time I have made some changes to the hotkeys/keyboard shortcuts, and added a few brushes, this disappears (like it resets back to factory settings by itself) when I re-open Illustrator.
