I am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 RepliesIt seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies View RelatedSee the red srtoke, which is 100% round calligraphic brush and 1pt weight applied, 6400% zoomed.
also this one:
The stroke is not even working properly here.
I am using Ai Cs6. I am trying to make a new calligraphic brush. The graphic I wish to create the brush for is highlighted on my screen, and I clicked on the New Brush icon in the Brush Menu. After changing the angle, roundness and size, the only options are "fixed and random". All other options are greyed out. How do I access the "tilt" feature for example?
View 5 Replies View RelatedI'm working on a reflective drawing and using gradients on strokes. I've been using pressure sensitive calligraphic brushes I made. Now I'm trying to use variable width preset profile brushes. It works fine for the first stroke, but every time I make a new stroke, it reverts back to a calligraphic pressure brush. How can I keep my brushes the same profile until I manually select it to be different? I've gone back and forth between the brush tool and pencil tool and neither will keep any basic variable width profile past the first stroke. I have to select every brush stroke and change it again and again after drawing it.
View 3 Replies View RelatedReducing the Roundness of a calligraphic brush to 0% seems to create 'flat' ends to a stroke, but, on closer inspection, the ends are not perfectly flat/straight.
The line seems to start and end with a slight 'S' curve; it's less visible when the stroke has a different bearing, but I need it to be gone - is this possible? I'm trying to create a calligraphic brush with perfectly flat ends.
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
I spend 12 hours a day in illustrator and some functionality seems to simplistic and ultimately annoying.I'm using Windows 7 64bit. Adobe Illustrator CS6
1. Please auto switch between Stroke fill and fill when I select text. 99% of my time is spent only using fill on text. I would rather manually switch to Stroke when I want to add a fill to it rather having to switch to fill each time.
2. Same for Stroke, from point 1.
3. Add an auto layer for Guides. When I am using the Scissors tool, the majority of the time I don't want to cut my guides up, I would rather instead cut up the shape below it. Again manually changing the layer to select the guide would be preferable.
4. I personally never use the Eraser tool and I switch to the Scissors Tool. Without fail every time I launch Illustrator I have to switch from the Eraser Tool too the Scissors tool. Please add cookies or something so I don't have to always switch to the Scissors Tool.
5. Move "Align to Pixel" toggle somewhere outside a file menu.
The stroke only shows up when I save the file as a pdf as I zoom in the line gets smaller and smaller but never goes a away. In InDesign and on the PSD file the edges look fine just all white around the "horsefly"
View 4 Replies View RelatedI'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
My adjustment layers are set to come in with a white layer mask. But sometimes I want to fill that mask w. black after the adjustment and selectively brush-in the adjustment.
Is there a shortcut to quickly fill the mask w. black, w/o checking foreground/background colors; or choosing certain tools to be active; or Edit>Fill>Black, etc.? If not, how can I set my own keyboard shortcut? I don't see a Fill Black in the keyboard shortcut editing list.
Have an issue when importing pdf files into both X5 and X6. Fonts have been converted to outline and without Ghost script installed overlapping vectors fill in with white! With Ghost script installed center of fonts like e,b,p etc fill in with font color. Convert to eps prior to importing still has the issue? Also had some objects reposition on import but fixed if converted to eps? Processing a lot of client files for output to image so this is a real problem.
View 2 Replies View RelatedI need to draw lines on photos to matching figure numbers. For example, I'll have a white circle with an "A" in it and a line connecting the "A" to some item in the photo.
I usually draw a black line to the item. However, the color range sometimes forces me to place a white line right next to the black line (so people can see the line). Dashed lines are not desired.
Is there a way to draw a double line (one black and one white) using a brush or pencil?
I have a number of filled objects in various colours.Is there a quick way to swap their fill and stroke colours all in one operation in the same way as can be done with single colours with Shift+X?
View 8 Replies View RelatedI am creating a simple spider for a project. Initally I used the pen tool to make legs. It worked for a bit then all the sudden started filling in an area I didn't even draw with color. I'm not sure what I did to cause this to happen.
View 3 Replies View Relatedwould it be possible to set no fill and 1px black stroke as the default fill when I start up illustrator?
View 1 Replies View RelatedI am trying to convert an object's color from black to white. Like changing the color of a killer whale's black coat to sumthin like green or blue.
View 1 Replies View RelatedUnalbe to use eyedropper tool to pick up stroke attribute from one shape to use in fill of another shape. I shift click with my eyedropper tool on stroke but does not transfer that color to my fill color of other shape. Fill color shows correctly in tools panel but not in shape or control panel.
View 11 Replies View RelatedHow can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies View RelatedSo here's what I wrote to try and find and delete all pathItems within a document that lack a fill and lack a stroke.
var doc = app.activeDocument;
for (i=0; doc.pathItems.length>i;i++) {
alert(doc.pathItems[i].name + " " + doc.pathItems[i].fillColor.name)
[Code]....
But alas, neither seems to do the trick, the first one makes sense why it wouldnt work since it says that the color is "undefined" but it isnt a string called "undefined." So I'm not sure how to go about this at all now.
Everytime I set the fill/stroke color of objects in a file to 75, 68,67, 90 it resets it to 0, 0, 0, 100. It isn't consistent though... some objects accept the color.
View 5 Replies View RelatedSelect same fill color with java script and stroke color tool.
View 1 Replies View RelatedReturning to Illustrator after not using for a long time.
How can I permanently show paths created for example by the pen tool when I create them with no fill or stroke attributes - for example a set of contours?
If I set the view to outline (control + Y it does this but puts them on a white background meaning I can't see underlying layers.
I am wondering if there is a way to use the "select same fill color" and/or "stroke color" for just a group of objects in a document as opposed to document-wide.
View 6 Replies View RelatedI am new to the Appearance palette
See screen shot attached. (the text "Helvetica")
I have created some live text (ie: it remains editable)
I have given it a fill of black and a heavy (7pt) stroke of blue.
I cannot appear to rearrange the stroke so that it falls beneath the fill
I assumed it would simply be question of dragging it below, as one would with the Layers
However, when I converted the text to outlines (in this case the text "UNIVERS") it works.
And also why are the eyes in the first coloumn grayed out when the text is live. But not so when text is outlined?
So I noticed that when selecting multiple closed paths with a fill you can no longer swap them to a stroke in your tool panel. I am assuming that this just got overlooked.
View 1 Replies View RelatedI'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
I want to use a 3rd party brush to 'color in' parts of a drawing or paint the background so it has a nice effect.However, when I use the brush tool to add color it reacts in an odd way as seen in the snapshot. I've looked at the brush options but am unsure of what will make a difference. Is there a way of devoting more ram to the program when I'm using it?
Is there an alternative way of adding the same stroke to the actual fill of a shape? At the moment all of my fill colors are block colors rather than having a kind of chalk / pastel texture that I can get with the brush. Basically, I would like to fill shapes with textured color rather than flat color.
Okay so I've browsed these forums and everybody keeps saying to turn off Align new Objects to pixel grid well I've done that and it still keeps resetting. I've been using a Print document since I am trying to draw illustrations for a children's book but somehow when I choose anything below 1 pt it keeps going back to 1 pt no matter what.
Opened up transform panel too but it's not checked and grayed out so I can not turn on / off again. I am using Adobe Illustrator CS5.