Illustrator :: 3D Effect With Overlapping Line With Fill And Stroke?
Feb 16, 2014
How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies
ADVERTISEMENT
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Nov 20, 2012
I spend 12 hours a day in illustrator and some functionality seems to simplistic and ultimately annoying.I'm using Windows 7 64bit. Adobe Illustrator CS6
1. Please auto switch between Stroke fill and fill when I select text. 99% of my time is spent only using fill on text. I would rather manually switch to Stroke when I want to add a fill to it rather having to switch to fill each time.
2. Same for Stroke, from point 1.
3. Add an auto layer for Guides. When I am using the Scissors tool, the majority of the time I don't want to cut my guides up, I would rather instead cut up the shape below it. Again manually changing the layer to select the guide would be preferable.
4. I personally never use the Eraser tool and I switch to the Scissors Tool. Without fail every time I launch Illustrator I have to switch from the Eraser Tool too the Scissors tool. Please add cookies or something so I don't have to always switch to the Scissors Tool.
5. Move "Align to Pixel" toggle somewhere outside a file menu.
View 4 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Aug 30, 2013
Why the line overlap? [URL] ....
If I move the Rectangle above all is clean... [URL] ....
View 6 Replies
View Related
Feb 6, 2014
I have a number of filled objects in various colours.Is there a quick way to swap their fill and stroke colours all in one operation in the same way as can be done with single colours with Shift+X?
View 8 Replies
View Related
Feb 9, 2013
I am creating a simple spider for a project. Initally I used the pen tool to make legs. It worked for a bit then all the sudden started filling in an area I didn't even draw with color. I'm not sure what I did to cause this to happen.
View 3 Replies
View Related
Feb 11, 2014
would it be possible to set no fill and 1px black stroke as the default fill when I start up illustrator?
View 1 Replies
View Related
Oct 22, 2013
Unalbe to use eyedropper tool to pick up stroke attribute from one shape to use in fill of another shape. I shift click with my eyedropper tool on stroke but does not transfer that color to my fill color of other shape. Fill color shows correctly in tools panel but not in shape or control panel.
View 11 Replies
View Related
Jan 10, 2014
So here's what I wrote to try and find and delete all pathItems within a document that lack a fill and lack a stroke.
var doc = app.activeDocument;
for (i=0; doc.pathItems.length>i;i++) {
alert(doc.pathItems[i].name + " " + doc.pathItems[i].fillColor.name)
[Code]....
But alas, neither seems to do the trick, the first one makes sense why it wouldnt work since it says that the color is "undefined" but it isnt a string called "undefined." So I'm not sure how to go about this at all now.
View 3 Replies
View Related
Feb 24, 2014
Everytime I set the fill/stroke color of objects in a file to 75, 68,67, 90 it resets it to 0, 0, 0, 100. It isn't consistent though... some objects accept the color.
View 5 Replies
View Related
Aug 8, 2013
Select same fill color with java script and stroke color tool.
View 1 Replies
View Related
Aug 31, 2012
Returning to Illustrator after not using for a long time.
How can I permanently show paths created for example by the pen tool when I create them with no fill or stroke attributes - for example a set of contours?
If I set the view to outline (control + Y it does this but puts them on a white background meaning I can't see underlying layers.
View 2 Replies
View Related
Feb 8, 2013
My image is overlapping artboard borders,is there any easy way to cut/trim all overlapping objects??
View 3 Replies
View Related
Apr 24, 2013
I am wondering if there is a way to use the "select same fill color" and/or "stroke color" for just a group of objects in a document as opposed to document-wide.
View 6 Replies
View Related
Dec 12, 2012
I am new to the Appearance palette
See screen shot attached. (the text "Helvetica")
I have created some live text (ie: it remains editable)
I have given it a fill of black and a heavy (7pt) stroke of blue.
I cannot appear to rearrange the stroke so that it falls beneath the fill
I assumed it would simply be question of dragging it below, as one would with the Layers
However, when I converted the text to outlines (in this case the text "UNIVERS") it works.
And also why are the eyes in the first coloumn grayed out when the text is live. But not so when text is outlined?
View 8 Replies
View Related
Jun 19, 2013
So I noticed that when selecting multiple closed paths with a fill you can no longer swap them to a stroke in your tool panel. I am assuming that this just got overlooked.
View 1 Replies
View Related
Mar 5, 2014
I'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
View 14 Replies
View Related
Nov 2, 2013
I want to use a 3rd party brush to 'color in' parts of a drawing or paint the background so it has a nice effect.However, when I use the brush tool to add color it reacts in an odd way as seen in the snapshot. I've looked at the brush options but am unsure of what will make a difference. Is there a way of devoting more ram to the program when I'm using it?
Is there an alternative way of adding the same stroke to the actual fill of a shape? At the moment all of my fill colors are block colors rather than having a kind of chalk / pastel texture that I can get with the brush. Basically, I would like to fill shapes with textured color rather than flat color.
View 2 Replies
View Related
Mar 17, 2013
The color swatches in toolbar for fill and stroke are not functioning as they should. When I select an object on the artboard, the swatches display fine in the toolbar for what they should be. However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be.
I am using 16.2.1 (cloud) for Mac OS 10.8.2
I've submitted a bug report.
Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting. I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.
View 2 Replies
View Related
Dec 27, 2012
I just need to be able to have the glow or shadow around the object, but no fill or stroke at all.
View 6 Replies
View Related
Jun 25, 2012
I am using live paint to paint cartoon character illustrations. The artwork is brought into Illustrator CS3 and live traced. Then I convert it to a live paint group and use the paint bucket to fill. Everything looks fine no matter how much I zoom in. If I bring the AI file into Photoshop CS6 I can see a thin white line between the black line art and the fill. This is most noticeable where black meets black. I can also see this sometimes in file previews while browsing through files. If the white line cannot be seen in Illustrator is the file ok? I did just upgrade to CS6 if that would make a difference.
View 2 Replies
View Related
Feb 16, 2014
I am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 Replies
View Related
Jun 25, 2013
I have the following rounded rectangle
Need to make border glossy like below image
In order to do that, I've expanded this shape and created a ellipse with no stroke above button, with transparency/screen. This is what I got:
Now I need to get rid of the rest of ellipse, so the button will be transparent on upper boundaries. Inner part of button should be white, but whatever I put between button and ellipse should receive glossy effect. How to do that?
View 2 Replies
View Related
Sep 22, 2012
On this website is a logo for Okinawa, it has a stroke twisted into a ribbon. [URL] ...
View 5 Replies
View Related
Mar 24, 2014
I should be able to apply an effect to a line that has been made with the line tool. Why is this not working?I thought that maybe I might have disabled Effects somehow, but I can't think of anything.
View 9 Replies
View Related
Aug 1, 2013
I am making a 15x22" print of a map of Baltimore and am not sure what pt size to maket the lines separating the neighborhoods. I want to be sure the lines are visible from far away, and, since this is my first time printing something this size.
View 1 Replies
View Related
Jul 10, 2013
I have placed a image in illustrator and i tried to put a simple black stroke round it but it doesnt work. what am i doing wrong.
View 3 Replies
View Related
May 10, 2012
I am programming an Illustrator plug-in for flexible modifying the width of stroked lines created by the Paintbrush Tool or Pencil Tool. The way of width modification should be similar to the "Width Tool".
Now I would like to have access to the painted area of the stroke lines, which I want to modify. With the Width Tool it is possible to modify the borders of the painted area very flexible. That is the same I want to do in the first step, but I do not know how to access these borders of the painted areas of stroke lines. I would like to know which Suites/functions are responsible for dealing with the painted area of stroke lines.
View 1 Replies
View Related
Jul 7, 2013
For some reason I cannot create a line weight/stroke under 1pt in Illus CS6. I will select 0.5pt but the selection keeps defaulting back to 1pt. I deleted my preferences, but didn't work. How can I fix?
View 1 Replies
View Related
