Illustrator :: Unclean Line Overlapping
Aug 30, 2013Why the line overlap? [URL] ....
If I move the Rectangle above all is clean... [URL] ....
ADVERTISEMENT
Illustrator :: 3D Effect With Overlapping Line With Fill And Stroke?
Feb 16, 2014How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies View RelatedIllustrator :: Image Is Overlapping Artboard Borders - Cut / Trim All Overlapping Objects?
Feb 8, 2013My image is overlapping artboard borders,is there any easy way to cut/trim all overlapping objects??
View 3 Replies View RelatedAutoCAD 2010 :: Arc / Line Overlapping Display
Jul 12, 2013I assume it's just my autocad display but I can never tell if lines and are drawn correctly or not. I'll draw construction lines and circles and grip edit my linework to snap to the end points and arc midpoints perpindicular to the circle but there are still overlapping displays. In the attached image I've snapped to arc points to the circle and the edges of the hatch to the extension/intersection of them and this is how it still displays.
Yes, I am constantly regenning and my arc smoothness is set to 10000.
AutoCAD Map 3D :: Line Up Dashes Of Overlapping Polylines
May 3, 2012Is there anyway to line up the dashes of overlapping polylines so that when I have 2 or more dashed polylines on top of each other the polyline will still looks dashed. Because at the moment the dashes don't line up and the polyline appears as a solid line where they overlap.
View 1 Replies View RelatedIllustrator :: Possible To Have Overlapping Slices
May 17, 2010is it possible to have overlapping slices? For example, I typically start a web design in illustrator, then like export pieces to use in in my build. But, I tend to have a lot of overlaping pieces that need to be exported (full static background image for the webpage and banner overlap for example). I find myself, hiding pieces, drawing out a slice, export it, then go back, delete that slice, create another slice . . . as you can see, it gets pretty tedious. Everytime I try to overlap a slices, they just create new slices and I end up with a bunch of rectangle slices all over the artboard.
View 5 Replies View RelatedIllustrator :: Overlapping Pattern With Repeat
Mar 4, 2014Please see image below.
How would I be able to create an image like this where the highlighted section completes in sequence. i.e - the overlapping sequence stays correct?
Illustrator :: How To Combine Paths That Are Not Overlapping
Dec 11, 2013So I'm working with type, and I want to place a very thick outline around the type it's self.Creating a thick outline unfortuantely doesn't just work, as it aligns it over the text strokes themselves.
Corel has an option to place the outline behind the object (see below)...but alas, illustrator does not... they have the align outside option (far less effective).I want this style without having to duplicate the text, and placing one with an outline behind it:
So when I convert the text to outlines, and apply the outside aligned stroke I get an overlap from the other charactersis there a way to combine objects that aren't overlapping into a single object, so when I align the outline around the text I don't get the above problem, or is there a way to place an outline behind an object without duplicating the object and adding a thick outline?
Illustrator :: Overlapping Parts Of Two Words?
Nov 20, 2012How I can overlap the words "Highland" and "Park".
View 6 Replies View RelatedIllustrator :: Creating Fills From Overlapping Stokes
Jan 28, 2014I'm trying to automatically create fill shapes out of a pattern I made with stokes. The pattern (see attached) is comprised of overlapping rows of lines. My goal is to make he inner triangle shapes different colours, but I will need an actual shape there before I can add colour.
I've tried playing with the pathfinder tools, but haven't had any luck.
Illustrator :: Get Text That Is Overlapping To Alternate From In Front To Behind?
Oct 4, 2013I'm new to the adobe family and I'm working on a design for one of my friends and he came across a look he was wanting. The problem is I cant figure out how to get the text that is overlapping to alternate from in front to behind and so on and so forth.
View 8 Replies View RelatedIllustrator :: How To Change Inner Strokes Of Two Overlapping Circles
Jan 8, 2013I have two overlapping circles with 2px solid stroke. Now, I'd like to change the two parts of the circles which are now within the circles to a dashed line. But this creates only parts of the lines in dashed mode. Here, I used the Pathfinder's "Divide".
View 2 Replies View RelatedIllustrator :: How To Make Overlapping Arrows In A Circle
May 6, 2013I'm trying to make overlapping arrows in a circle like the ones here. I pretty much have it, but I'm having trouble with how to get the layers right.
Here's what I have so far:
Note that my spacing is a little off, number 1. I tried to rotate each arrow 60 degrees, but it's not perfect.
Secondly, the bottom arrow is above everything, instead of above at the point and below at that base. How does one achieve that feat?
Illustrator :: Removing Hidden Sections Of Several Overlapping Objects
Dec 19, 2012I'm looking for any options that could remove the hidden sections over numerous overlapping objects. I have plenty of objects that lay over each other in this design, and now my client is thinking about getting it screen printed. Is there a shortcut for this that would save me a mass amount of time? (other than using Pathfinder on each and every one?)
View 2 Replies View RelatedIllustrator :: Paths From Bottom Layer Overlapping Layers Above?
Nov 7, 2013I have just finished designing my characters. Now I have to create my background. I figured to do this, I would simply have to create my background and hide the layers above so I can see what I'm doing. However the few lines that I've created in my background are overlaping the characters, how can I resolve this?
Also after doing a brush or creating a path in general, how do i I deselect it (instead of having to bring out the selection tool and clicking anywhere on the screen)
I jut remembered something else, if i want to select an object but the selection rectangle covers the perimeter of another object, how do I avoid selecting the other object aswell?
Illustrator :: Transparency In Overlapping Objects Using Opacity Mask?
Jan 15, 2013I'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedIllustrator :: Ellipse Inside A Circle With No Overlapping Paths?
Jul 25, 2012I'm trying to draw a circle and an ellipse so that the ellipse shares exactly two points of contact between the two paths (not centered).
This is seemingly impossible with the tools provided since, if you draw an ellipse normally, with the anchor points of the ellipse on the circlular path, there are four points of contact, which means the two paths overlap.
I've tried revolving a line segment that goes from the edge of the circle to the middle of the circle (not center) with similar results.
Drawing the ellipse first doesn't work either.
Astute Graphics has a plug-in, Subscribe that would almost work, except it only draws circles, not ellipses.
Am I overlooking someting extremely obvious, or am I correct to say that illustrator can't do this? I'm using CS5. Maybe this is something that is fixed in CS6 with a snap to path option?
Illustrator :: Erasing Overlapping Shapes - How To Cut Out Part Of Some Stroked Objects
Oct 3, 2012I have a logo where I'm having trouble erasing some overlapping shapes? I'm using Illustrator CS5.
This is part of the logo: [URL]. I need to erase the white part of the hexagon that's showing through the cog and circle shapes, and I need to erase the part of the green cog that's showing through the circle. The problem is that the cog and hexagon have been made using strokes, so every time I try and use the pathfinder tool the cog inverts itself and I get odd results like this: [URL].
Illustrator :: How To Find And Delete Multiple Overlapping Cut Contour Paths
Dec 10, 2012Background: My job requires that I print vinyl cut letters and shapes. I do this by creating a cut contour path in illustrator with a spot color as a stroke, so that once printed, there will be instructions on the print showing where to cut and the cutter will recognize the marks.
My problem is that, for some reason, the cutter is going back over the cut path a 2nd time, as if there is more than one cut contour path in the file. But looking at the eps file in Illustrator, I don't see any extra overlapping paths with another stroke. It just looks like there is one pink line that there are actually extra cut paths that the cutter is reading that I don't know about. Is there a way for me to either A) find all of the paths and turn off the spot color swatch on all of them and just apply it to the one I need or B) find all paths and delete overlapping ones that I don't need?
getting extra overlapping cut paths in different Layers(?) I'm just really not sure what to do or how to find these and weed them out.
Illustrator :: Command To JOIN Two Overlapping Anchor Points As SMOOTH Join Is Not Working
Jun 21, 2013The command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
Illustrator :: Can't Apply Effect / Warp - Wave To A Line Made With Line Tool
Mar 24, 2014I should be able to apply an effect to a line that has been made with the line tool. Why is this not working?I thought that maybe I might have disabled Effects somehow, but I can't think of anything.
View 9 Replies View RelatedIllustrator :: Thin White Line Between Line Art And Live Paint Fill?
Jun 25, 2012I am using live paint to paint cartoon character illustrations. The artwork is brought into Illustrator CS3 and live traced. Then I convert it to a live paint group and use the paint bucket to fill. Everything looks fine no matter how much I zoom in. If I bring the AI file into Photoshop CS6 I can see a thin white line between the black line art and the fill. This is most noticeable where black meets black. I can also see this sometimes in file previews while browsing through files. If the white line cannot be seen in Illustrator is the file ok? I did just upgrade to CS6 if that would make a difference.
View 2 Replies View RelatedIllustrator :: Line Segment Tool Does Not Allow To Draw Horizontal Line?
Oct 18, 2012I must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
Illustrator :: Erases First Line After Draw Another One Close To The First Line
Dec 26, 2013when I (try to ) use Pencil and Brush tools, (cross-hatching), some lines get erased/replaced by the lines drawn close to them. It must have something to do with the preferences, but I am not sure what to change/adjust.
View 2 Replies View RelatedIllustrator :: Drag To Create A Line - Line Appears But When Click To Create Another It Disappears
Oct 26, 2013I'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
Illustrator :: Unwanted Line Appear To Close Object After Deleted A Part Of Line Of Object
Sep 27, 2013why is it when i cut and delete a line from an object, after the line is deleted, there is another line appear automatically , and i can not select the line itself. how do i keep the object from closing??
View 2 Replies View RelatedCorelDRAW X6 :: Overlapping Objects
May 24, 2013Normal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
I created a design in Corel X6. My design was then sent to a vinyl cutter and heat pressed on to t-shirts. My problem is this: where the vinyl overlaps I get an impression mark on the vinyl at the top. How can I delete the portion of the design in Corel that will beoverlapping to eliminate the impression marks?
VideoStudio :: Overlapping Sound?
Apr 30, 2011I somehow caused my sound track to overlap. I can't seem to remove it. Down at the bottom of the picture looks like a white X on the bottom music track.
I hesitate to mess with it much because I had two video tracks and spend some time getting them synced.
Photoshop :: Overlapping Letters?
May 4, 2009Is there a way to make the letters overlap each other? I basically just want the outer glow effect to be around each letter individually instead of the word/sentence as a whole. The previous letter overlapping the following..
View 19 Replies View RelatedPhotoshop :: Overlapping Photos?
Mar 17, 2009I using Photoshop 7, How do I overlap two photos?
View 1 Replies View RelatedPhotoshop :: Overlapping Brushstroke Opacity
Mar 9, 2013I'm using Photoshop CS5 with a Wacom Intuos 3 and have not had any problems with my brushes before.
Today, however, I started to paint, and noticed that my brushes were acting up. I paint a brushstroke and everything is fine - but when I paint another one over it, it makes the first stroke appear darker, whereas I would want the second stroke to cover the first one.
My brush mode is set to Normal and the opacity is 100%.
I've opened previous files as well to see if it is just about the current file's settings somehow, but the problem still persists. And I don't recall having done anything to change the brushes' behavior before.