Normal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
I created a design in Corel X6. My design was then sent to a vinyl cutter and heat pressed on to t-shirts. My problem is this: where the vinyl overlaps I get an impression mark on the vinyl at the top. How can I delete the portion of the design in Corel that will beoverlapping to eliminate the impression marks?
this is probably an easy one but is there a way to cycle through overlapping objects?
to give an example I have three images overlaid that perfectly match up I want edit the objects underneath without having to move the top layer, what is the best way to do this?
My image is overlapping artboard borders,is there any easy way to cut/trim all overlapping objects??
View 3 Replies View RelatedI am a screen printer making a leap into the world of CorelDraw. Loving it so far, especially the trace options. That being said, I have a piece of artwork that a client wanted me to scan in and trace to see how it would turn out. The image can be found here:
[URL]....
Problem I am having is the stick figure in front of the cross. The figure is being grouped with the cross...not allowing me to properly color the image and separate how I need it. The text needs to be red, the cross black, the hearts red, and the stick people white...will be going on a blue t-shirt. Am I looking at having to create my own lines...or am I overlooking/not thinking of an easy way to do this?
I'm trying to hatch multiple objects in one go, most of which overlap with eachother in places. When I do this, the overlapping areas don't get hatched. I've tried selecting different options for island detection, but this doesn't seem to work.
View 6 Replies View RelatedIs there a way to generate the intersection of the overlapping objects?
View 2 Replies View RelatedCan we delete overlapping duplicate objects for both model and anotations in Revit
View 1 Replies View RelatedHow to identify and delete overlapping objects. For example one polyline has been pasted double time, with in common reference point.
View 3 Replies View RelatedI created a square and make it as a region. I just realize that they are consist of two kind of overlapping objects.
One is four lines that formed a square and another is the formed square region.
How do I switch the mode back to the AutoCAD classis, which when I create a region, then there only available one object, that is, the formed region.
I have an assembly with various parts in it. I am trying to write a routine that will
1) systematically traverse the assembly and find parts that overlap,
2) where they overlap perform a sculpt operation on the parts
Whilst i can do this manually by edit>copy object>sculpt>select surface ... i don't know how to mimic this programmatically.
So far i have coded to do it in a very hamfisted way by making a derived part file from the overlapping parts, opening the derived part file and performing the sculpt, replacing the original part in the assembly with its new derived-sculpted part and then continuing to traverse the assembly tree.. - it is super slow and uses lots of file operations.
I have an assembly with various parts in it. I am trying to write a routine that will
1) systematically traverse the assembly and find parts that overlap,
2) where they overlap perform a sculpt operation on the parts
Whilst i can do this manually by edit>copy object>sculpt>select surface ... i don't know how to mimic this programmatically.
So far i have coded to do it in a very hamfisted way by making a derived part file from the overlapping parts, opening the derived part file and performing the sculpt, replacing the original part in the assembly with its new derived-sculpted part and then continuing to traverse the assembly tree.. - it is super slow and uses lots of file operations.
I cannot recall the command or the name of action to set my AutoCAD MEP 2012 to have a drop-down menu from the cursor when I am trying select an object that is in a cluster of other objects. I had the command active previously but just re-installed the program last week and have been stumped about it since.
View 2 Replies View RelatedI'm looking for any options that could remove the hidden sections over numerous overlapping objects. I have plenty of objects that lay over each other in this design, and now my client is thinking about getting it screen printed. Is there a shortcut for this that would save me a mass amount of time? (other than using Pathfinder on each and every one?)
View 2 Replies View RelatedI'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedI have a big drawing generated from a database with .NET containing about a 1000 parcels. Each vertex of each parcel has a label as MText. there are areas where these labels overlap partially. Is there a command to cycle through all areas where the overlapping occurs to speed up the cleaning process of the drawing?
View 2 Replies View RelatedI have a logo where I'm having trouble erasing some overlapping shapes? I'm using Illustrator CS5.
This is part of the logo: [URL]. I need to erase the white part of the hexagon that's showing through the cog and circle shapes, and I need to erase the part of the green cog that's showing through the circle. The problem is that the cog and hexagon have been made using strokes, so every time I try and use the pathfinder tool the cog inverts itself and I get odd results like this: [URL].
From my vecor drawing program i export a file as DXF/DWG.
Then this file is run true a program to determinaded the plotting lenght on a lasercutter.
But a simple drawing takes som 80 minutes to cut and engrave.
Loading the file into X5 Home & Student is discover that the file contains 29059 lines.
Selecting some lines i can see that there are underlying lines.
How can i remove them without using VBA. And my drawing program has no option to save it to a file type.
Export it as a Atocad version 2000 or 14 doenst change the number of lines
I know this question was posted back in 2010, but thought I would bring it back to the surface to see if anything new has developed.
I am running X4. I draw jig saw puzzles in CorelDRAW (several shapes that I andomly node-connect) and each piece overlaps adjoining pieces on all four sides and are connected at multiple corner nodes as well as arc nodes. When sending to the laser for cutting, each side of each piece gets cut twice due to the overlapping lines. I was hoping the RemoveUnderlyingDups and NodeClean macro from a 2010 post would take these overlapping lines and create individual horizontal and vertical line segments from the connected nodes so the laser would make one continuous cut rather than duplicating all the cuts.
However, after running the macros, even on a small portion of the puzzle, I didn't get any results. I combined then broke apart as mentioned and still no joy. The only way I have been able to create separate line segments is to cut apart at the nodes and delete individual line segments... on 1250 pieces, with four sides and all sides overlapping, that's 10,000 separate edits... needless to say, duplicate cutting by the laser is faster.
Ideally, being able to create continuous horizontal and vertical lines based on corner node connections, would be the best. At that point, I could cut a 1250 piece puzzle with just 50 continuous horizontal lines and 100 vertical lines.
Have an issue when importing pdf files into both X5 and X6. Fonts have been converted to outline and without Ghost script installed overlapping vectors fill in with white! With Ghost script installed center of fonts like e,b,p etc fill in with font color. Convert to eps prior to importing still has the issue? Also had some objects reposition on import but fixed if converted to eps? Processing a lot of client files for output to image so this is a real problem.
View 2 Replies View RelatedI often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
We have created a simple label and grouped several components in CorelDraw X5. Now we cannot ungroup the components. When we right-click the group, the options to group or ungroup are dimmed. The result is the same when right-clicking on the group in the object manager docker.
Perhaps related, is the fact we cannot select the components of the group from the object manager docker. We can select the group, but none of the individual components in the group. None of the layers is 'Locked' in the object manager docker so we should be able to edit them.
What might be preventing us from accessing the ungroup option for a group?
Having an issue with my objects not letting me drag them. I can move them with the arrow keys, by the coordinates, and can even move the nodes but i can't just grab and drag them with the mouse.
View 1 Replies View RelatedI glad to know can i run object with text in coreldraw. I'm working on a book the when i format the some paragraphs the fractions and decorative things back and fro from its original position. So it's a pretty hard to arrange manage on its original position. I try by grouping them with text boxes. The real problems is about fractions and square roots which is drawn by nodes. Can i add equation from math type in text box.
View 2 Replies View RelatedWhen I print from Corel Draw X3 some of the objects do not print. They are in the art and show up fine on the print preview but then when I print, those objects are missing. It's almost always with customer art that I've imported. I can't recall it ever happening with art that was designed in X3.
It's the strangest thing. If I change the color of the object that won't print it will then show up in the print preview for the corresponding color. But it still won't print. I usually end up having to recreate that object and then it prints fine. I don't understand why it wouldn't print if I'm able to view the object and change it's color.
I'm using Accu-Rip software, an Epson 1400 printer, and Windows XP. We print separations for screen printing.
When working on a custom page size, the bitmaps and vector objects disappears, well, i can still select them, but i cant see them, i import the images using the import function, all fine, till i try to move them or resize them, then they vanish.
View 4 Replies View RelatedIs there an easy way to fix visible gap between objects?
I draw an example to demonstrate the problem. I created this box using snap to objects, after removing the outline it leaves a visible gap between objects. Even if i draw without an outline, the gap still show.
how to trim 2 objects. First one is a single line scribble on the background. Second object is a face silhouette. I select both object and try to trim the scribble line running thru the head, using "arrange/shaping" but can't select the function trim. The only one available is simplify, all others including trim are inactive.
View 14 Replies View RelatedIf there is a similar function to "Execute function and repeat" in order to make the displacement of various objects. For example I have 5 different objects and wanted to give them a displacement of 1.5 cm, how to do this automatically by Corel Draw ?
View 6 Replies View RelatedI have several documents that I regularly access and each has a logo that is normally visible and prints without issue. The object comprises some text and a drawing object.
Earlier this week I added a new second monitor to my machine and since then opening documents in CorelDraw results in a beige, rather than white, workspace. If I change the colour profile from the default "sRGB IEC6 1966-2.1" to the "Samsung - Natural Color Pro 1.0 ICM" profile the white workspace returns, but part of my logo is still not visible.
If it was only one document I might have thought I'd accidently deleted and saved it, but I have at least a dozen or more documents and each document has the logo repeated several time and in all cases only the drawing object is visible, the rest of the logo has vanished, even when printed. I can see the full logo in a document preview prior to opening it.
I have tried unplugging the new monitor, but haven't yet tried a reboot with it disconnected. The monitor that was replaced was an Iyama AS4314UT and it has been replaced with a Dell E1911 Digital. both are my secondary displays, the primary is a Samsung Synchmaster 943 which I have been using for a few years.
I want to count objects in a photo, by marking them (with a dot or something similar) so I know what I've already counted, and then be easily able to tell how many objects there are in the photo. Is there a way to do this in Corel Draw? I'll be counting hundreds of images so it needs to be a fairly quick method of marking each one.
View 3 Replies View RelatedIs it possible to export a Draw file with vectors and some perhaps some bitmaps into a layered Photo-Paint file?
The web coders nowadays only seem to be able to work with layered PSDs and I'm doing my designs in Draw.