I'm trying to hatch multiple objects in one go, most of which overlap with eachother in places. When I do this, the overlapping areas don't get hatched. I've tried selecting different options for island detection, but this doesn't seem to work.
View 6 RepliesMy image is overlapping artboard borders,is there any easy way to cut/trim all overlapping objects??
View 3 Replies View RelatedI have this issue where I have stone right below some framing and other objects. I use a hatch to fill in the square of stone. When I use the hatch, I send it to the back of the drawing order, but it is right below a bunch of my dimensions.
These dimensions become hard to see. I could have sworn that I once saw my hatches leave some extra room around the dimensions. Is there a way to make them easier to see? I guess the ugly solution I have right now is to put small boxes around anything within the hatch to leave some room.
i encounter this. In model space i have hatch few objects with solid hatching. When i bk to paper space apply revision cloud for the few object its appear hiding behind the object. What happen??
View 4 Replies View RelatedHow to identify and delete overlapping objects. For example one polyline has been pasted double time, with in common reference point.
View 3 Replies View RelatedI created a square and make it as a region. I just realize that they are consist of two kind of overlapping objects.
One is four lines that formed a square and another is the formed square region.
How do I switch the mode back to the AutoCAD classis, which when I create a region, then there only available one object, that is, the formed region.
I have an assembly with various parts in it. I am trying to write a routine that will
1) systematically traverse the assembly and find parts that overlap,
2) where they overlap perform a sculpt operation on the parts
Whilst i can do this manually by edit>copy object>sculpt>select surface ... i don't know how to mimic this programmatically.
So far i have coded to do it in a very hamfisted way by making a derived part file from the overlapping parts, opening the derived part file and performing the sculpt, replacing the original part in the assembly with its new derived-sculpted part and then continuing to traverse the assembly tree.. - it is super slow and uses lots of file operations.
I have an assembly with various parts in it. I am trying to write a routine that will
1) systematically traverse the assembly and find parts that overlap,
2) where they overlap perform a sculpt operation on the parts
Whilst i can do this manually by edit>copy object>sculpt>select surface ... i don't know how to mimic this programmatically.
So far i have coded to do it in a very hamfisted way by making a derived part file from the overlapping parts, opening the derived part file and performing the sculpt, replacing the original part in the assembly with its new derived-sculpted part and then continuing to traverse the assembly tree.. - it is super slow and uses lots of file operations.
I cannot recall the command or the name of action to set my AutoCAD MEP 2012 to have a drop-down menu from the cursor when I am trying select an object that is in a cluster of other objects. I had the command active previously but just re-installed the program last week and have been stumped about it since.
View 2 Replies View RelatedI have a big drawing generated from a database with .NET containing about a 1000 parcels. Each vertex of each parcel has a label as MText. there are areas where these labels overlap partially. Is there a command to cycle through all areas where the overlapping occurs to speed up the cleaning process of the drawing?
View 2 Replies View RelatedNormal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
I created a design in Corel X6. My design was then sent to a vinyl cutter and heat pressed on to t-shirts. My problem is this: where the vinyl overlaps I get an impression mark on the vinyl at the top. How can I delete the portion of the design in Corel that will beoverlapping to eliminate the impression marks?
this is probably an easy one but is there a way to cycle through overlapping objects?
to give an example I have three images overlaid that perfectly match up I want edit the objects underneath without having to move the top layer, what is the best way to do this?
Is there a way to generate the intersection of the overlapping objects?
View 2 Replies View RelatedCan we delete overlapping duplicate objects for both model and anotations in Revit
View 1 Replies View RelatedI am a screen printer making a leap into the world of CorelDraw. Loving it so far, especially the trace options. That being said, I have a piece of artwork that a client wanted me to scan in and trace to see how it would turn out. The image can be found here:
[URL]....
Problem I am having is the stick figure in front of the cross. The figure is being grouped with the cross...not allowing me to properly color the image and separate how I need it. The text needs to be red, the cross black, the hearts red, and the stick people white...will be going on a blue t-shirt. Am I looking at having to create my own lines...or am I overlooking/not thinking of an easy way to do this?
I'm looking for any options that could remove the hidden sections over numerous overlapping objects. I have plenty of objects that lay over each other in this design, and now my client is thinking about getting it screen printed. Is there a shortcut for this that would save me a mass amount of time? (other than using Pathfinder on each and every one?)
View 2 Replies View RelatedI'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedI have a logo where I'm having trouble erasing some overlapping shapes? I'm using Illustrator CS5.
This is part of the logo: [URL]. I need to erase the white part of the hexagon that's showing through the cog and circle shapes, and I need to erase the part of the green cog that's showing through the circle. The problem is that the cog and hexagon have been made using strokes, so every time I try and use the pathfinder tool the cog inverts itself and I get odd results like this: [URL].
The hatching appears in model space and paper space, except when i print from paper space, to PDF for example, the hatching disappears. why you can see the hatching in paper space but when you print to PDF it doesn't come out.
View 2 Replies View RelatedWe have some VIPs coming to see our new waste treatment facility. I was asked to make a pretty picture for them. So I started to hactch our site plan. Roads with gravel, grass, solid for tanks. They wanted more... So i changed tanks and grass to gradients and that was ok. When I tried to change the roads to a gradient, the tanks and grass became the new gradient and the road diappeared (blank). This is in ACAD 2013. I tried to do it in 2012 and the system crashed. When I restarted ACAD asked to send error message. The road is outlined in a polyline, as are all other objects beacause I have learned that ACAD can't handle the pick area unless it is a very small area. So I have lots of extra lines that are on defpoints or a separate layer, and hatches on their own layer.
View 5 Replies View RelatedAutoCAD generates gaps to my drawing, sometimes there is NO gap and then it says there is when I'm selection new are to hatch (puts the red circle to old place where it didn't earlier say there is gap!). I have tried to use Gap Tolerance tool first with value of 10 but it didn't work. After that I changed it to 1000 and it worked but the hatch area wasn't good. I also tried to pull line over other and trim it, didn't work either. Used also join but it didn't work.
I have used object snap always when I drew the picture. I have zoomed as much I can and there is no gaps.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
I've got a hatching problem...whenever I try to use a "dot" hatching...at a scale of 50.000....I tend to get this wierd white spots on different areas...and it seems to flush with the MLeaders...(See Attached Image).
View 4 Replies View RelatedMy colleague is using AutoCAD 2012 LT. He was wondering is it possible to hatch an un-hatched object by matching it with the properties of a hatched source object?
View 1 Replies View RelatedSo i'm trying to place a solid hatch inside a circle. AutoCAD seems to ask all the questions but then doesn't add the hatching. I tried ansi31 hatching and there is no difference. Current layer is on, color that should be seen.
View 2 Replies View RelatedI've noticed when I try to hatch something it will regen model every time after I select boundaries.
Below is from command line. How can I turn it off?
Command: BH HATCH
Pick internal point or [Select objects/seTtings]: S
Select objects or [picK internal point/seTtings]:Regenerating model.
Regenerating model.
1 found
We are using section views in our drawings. However, we don’t want any hatching to show up. I’ve scoured the hatch libraries and hatch documentation and I have not been able to figure out how to turn hatching off, or alternatively to create a hatch style that is blank. My attempt at creating a blank hatching file is attached, but it didn’t work.
How can I turn off hatching or create a 'blank' .pat?
When a co-worker is trying to hatch using pick point, multiple red circles start appearing and choke up the program. He is not even picking inside the area where these gap indication circles are appearing. I have had him adjust the hatch gap tolerance but am wondering if I can turn off this behavior entirely?
View 4 Replies View RelatedI have small problem. When I use hatch on certain area it also wants to hatch one closed area ,however other closed areas do not hatch. I rechecked , remade the closed area which is hatched along side with the area I really need to hatch. So how can I isolate that little area? Or what is the problem?
View 6 Replies View RelatedMy AutoCAD 2012 freezes every time when I do hatching. It doesnt matterthe size of the drawing nor the type of hatch I use.
View 5 Replies View RelatedIs it possible to change the cut and fill pattern from solid bands of colour to bands of colour cross hatch (for example)? The reason for this is, when printing the drawing uses a lot of ink.
View 8 Replies View RelatedIs it possible to have the hatching fade (become more transparent) so the hatched object is completely hatched up one end and then progressively transition to completely transparent at the other?
View 8 Replies View Related