AutoCAD 2010 :: Arc / Line Overlapping Display
Jul 12, 2013
I assume it's just my autocad display but I can never tell if lines and are drawn correctly or not. I'll draw construction lines and circles and grip edit my linework to snap to the end points and arc midpoints perpindicular to the circle but there are still overlapping displays. In the attached image I've snapped to arc points to the circle and the edges of the hatch to the extension/intersection of them and this is how it still displays.
Yes, I am constantly regenning and my arc smoothness is set to 10000.
View 2 Replies
ADVERTISEMENT
Sep 11, 2012
I have Problem in AutoCAD 2012 Reverse command.
Reversed horizontal line type does not display in AutoCAD 2012.
But if i open same file in AutoCAD 2010 or 2011 it displays.
This is Problem with Only line/pline drawn horizontally. Vertically drawn line/pline displays reversed line using reverse command.
View 9 Replies
View Related
Oct 19, 2010
I must have changed a setting and now I cannot figure out what I did.
On AutoCad at school, when drawing a line, there is a light blue dialogue box that would pop up above the cursor telling you the length of the line before you set it. (not the coordinates).
This is not showing up on the educational version of AutoCad I am running at home.
View 9 Replies
View Related
May 3, 2012
Is there anyway to line up the dashes of overlapping polylines so that when I have 2 or more dashed polylines on top of each other the polyline will still looks dashed. Because at the moment the dashes don't line up and the polyline appears as a solid line where they overlap.
View 1 Replies
View Related
Aug 30, 2013
Why the line overlap? [URL] ....
If I move the Rectangle above all is clean... [URL] ....
View 6 Replies
View Related
Sep 20, 2013
I have a big drawing generated from a database with .NET containing about a 1000 parcels. Each vertex of each parcel has a label as MText. there are areas where these labels overlap partially. Is there a command to cycle through all areas where the overlapping occurs to speed up the cleaning process of the drawing?
View 2 Replies
View Related
Jan 23, 2013
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies
View Related
Feb 16, 2014
How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies
View Related
Feb 8, 2013
My image is overlapping artboard borders,is there any easy way to cut/trim all overlapping objects??
View 3 Replies
View Related
Jun 9, 2009
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies
View Related
Jan 22, 2010
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
View 9 Replies
View Related
Jun 14, 2012
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
View 4 Replies
View Related
Feb 1, 2012
I'm having trouble with the line type dissappearing or showing as Continuous when I print. It also does not appear to be the same size on different lines, even though the type, scale etc. are all the same.
View 9 Replies
View Related
Sep 16, 2011
Lets say you have a polyline snapped perpendicular to an acr and you start zooming in they tend to separate. In the past a simple regen would magically make them display as intersecting lines (no gap or overlap). Right now the regen isn't working and I can't figure out why or what changed. I tried changing the VIEWRES but that didn't seem to work. What else could it be? I don't even have to zoom in that far to notice the overlap.
Infrastructure Design Suite 2014
Civil 3D 2013 sp2
Windows 7 x 64, 16 GB
Intel Xeon @ 2.80 GHz
NVIDIA Quadro K2000
View 3 Replies
View Related
Oct 1, 2012
Is there a way to display more "lines" at the command line?
View 8 Replies
View Related
Feb 4, 2012
Is there any to get the single line display into the medium or medium low rep by object? I see the only place to get it is to use the High Detail rep by object. Normally in a high detail would you not want a double line for doors? and use a single line for concept in the medium low? I would like to see the ability to have the single door in all display reps by object
View 4 Replies
View Related
Feb 1, 2013
So when i would select a line, hover over one of the endpoints, the length and angle would be shown, as a quick dimension. for some reason that has stopped, all it does now if i select the line, hover over an endpoint the only thing it says is stretch, or lengthen.
RANT!!! (come on 2013, thats stupid, stretch and lengthen are basically the same thing, dont you think if i stretch something it would automatically lengthen something, and if i lenghtened something, it in fact would also be stretching it. and to see you replaced the simple dimensioning of that line with a pointless i wouldnt call it option. now to figure out the length i have to keep the properties file open, or i have to draw a faux line over the current one just to check its length, or literally i have to draw a dimension line.) EnD!!
What option might have been turned off? and that the new array no longer gives you a box, but you do it all through the command line. or the dynamic input. That was an AWESOME box that i do miss dearly, and no longer have the option to bring back..
View 4 Replies
View Related
Jul 24, 2012
Is it possible to weed contour lines displayed in a surface based on the slope? I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas. I have several cuts ranging from 33%-50% adjacent to flat areas around 1%. Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines.
View 1 Replies
View Related
Jun 10, 2011
I quickly created a roof and changed the view display to "sketchy". When I show the roof in top view diagonal lines are shown on the sloped surfaces. How do I get rid of them?
View 1 Replies
View Related
Jul 25, 2012
When building an annotation template, in the block editor (annotation editor etc..); how do you take the length of a 2D line or pline to be the display of my template?
Doing a water system map and it would be nice to have a line length with the ' symbol at the end rounded to the nearest foot on each length of pipe.
View 4 Replies
View Related
Mar 7, 2011
Is it possible to change the color of a line by changing the display configuration? If so, how?
View 3 Replies
View Related
Dec 22, 2011
line width does not display in either model or paper space, is there a way to make it display without going to print preview?
View 1 Replies
View Related
Aug 15, 2013
I have a Storm pipe network for a subdivision. All of the pipe are on the same layer, using the pipe style. For some reason, only 1 of 68 pipes will display through my viewports. All of the layers within the pipe style are thawed in my viewports, as well as the layer the pipes themselves are on.
Further, when I go back to an archived file from a few days ago, all the pipes are also on the same layers and styles, and all pipes display as they should through all viewports. There seems to be no rhyme or reason for this. I am not sure what could have changed as I didn't knowing adjust anything with the pipe networks since archiving a few days ago
View 5 Replies
View Related
Mar 15, 2012
there is a command that allows for editing the actual line work in an object controlled by the Display System... it is a last resort command if you cannot get the object to display as you wish.What is it?
View 1 Replies
View Related
Feb 21, 2012
I'm trying to import a pdf underlay in AutoCAD 2012. However, every time I have imported it, the frame of the underlay shows up, but the pdf itself doesn't show up.
Contrast = 100
Fade = 0
Monochrome = No
Show underlay = Yes
Path is correct
I've tried importing image underlays (PNG files), and they work fine. Also, the pdf file is pretty big (about 100 MB), so I didn't know if that affected its ability to display. How to get this to show up?
View 8 Replies
View Related
Feb 29, 2012
How do I get rid of this "pin point" in my display. It shows up when displaying an isometric or perspective view. I would like to make a nice screenshot without it. There must be a variable somewhere?
View 2 Replies
View Related
Jul 24, 2013
I have big problem with Text in AutoCAD drawings. Text is missing and I can't write in new drawings as well. We have different systems xp x 64, xp x84 , windiows 7 x64 and windows 7 x 84. Different AutoCAD’s: 2010 2011,2012 and the same problem. The problem occurs in many files, so not only in this one. When text bloc don’t work it showing every time, when we want to write, on down ribbon “** Undefined symbol 101 and 102 ...” . When we want to open stiles for text AutoCAD Mechanical have critical error: “Unhandled Access Violation Reading 0x0000 Exception at e0533c85h” and closed. We have different computers with different graphical cards. We installed already SP 2 for 2012 and other versions are too upgraded. It looks like this problem isn’t connected with hardware. We are using local licenses. You can see this problem on attached pictures.
View 9 Replies
View Related
Mar 13, 2012
I have a feature line, and a labels table created for it. The table has the following columns: Line or Curve #, Station, Segment Start X, Segment Start Y, Segment Start X, Bearing/Delta, Length, Radius, Grade Ahead.
what code I need for the table to display the station of the feature line at the start of the segment?
I also have an alignment with the same stationing over top of the feature line, but Im not sure how to code a reference text into the table either. I can create an end segment reference text for the plan view labels but even if I copy that code into the labels table it doesn't work.
View 4 Replies
View Related
Aug 12, 2013
Windows 7 Enterprise SP1 - AutoCad 2011 - Current Microsoft Patches - Office 2010
I can get Gotham .OTF fonts working ok in Adobe applications (Photoshop, Illustrator), Microsoft Office Applications (Word, Excel, Outlook) and Archicad. But I cannot get the Gotham fonts to appear in AutoCAD. Do I specifically require .TTF files for the fonts to work correctly in AutoCad?
Attempted .TTF conversion that only wanted to replace the existing .OTF via Control Panel-Fonts...Uninstalled KB2753842 that seemed to be a forum topic of cinversation
View 3 Replies
View Related
Jan 24, 2012
I suddenly am having a problem viewing underlays. It happens with PDF Files and DWF Files. When I insert the file nothing is displayed. I dont see a frame or an image. All I get is a point. When I select the point the underlay ribbon bar comes up. I have the show underlay selected. The Fade is Set to 0, In properties I can the layer is set to 0, but under view the height and width is all 0.00000.
I am running straight Autocad 2012 w/ SP1. Its 64 bit on Windows 7.
View 1 Replies
View Related
Oct 26, 2012
have a problem with the display of my constraints
after i uncheck the "show all dynamic constraints"
all the dimensional constraints stay invisible even i re check the show all
i can find a way to turn the visibility of the dimensional constraint on
Product Design Suite 2013
View 6 Replies
View Related
